What commands do I need to enter to change the default output https://i.ibb.co/J33DHk3/Screenshot1.png to the trimmed output https://i.ibb.co/bWd5bdT/Screenshot2.png ?

My attempts to move the ytics component to the left side continually fails and I don't even know how to trim the excessive white space around the whole image. And the color box needs to be moved a bit.

Any ideas?

Randall

On 10/08/2023 01:26, American Citizen wrote:
> What commands do I need to enter to change the default output
> https://i.ibb.co/J33DHk3/Screenshot1.png to the trimmed output
> https://i.ibb.co/bWd5bdT/Screenshot2.png ?
>
> My attempts to move the ytics component to the left side continually
> fails and I don't even know how to trim the excessive white space
> around the whole image. And the color box needs to be moved a bit.
>
> Any ideas?

I too have had various interesting problems with 2D GNUplot mostly
though with a tiny amount of the y-axis legend/title being off the
default visible window (tops of letter "T" and "Z" otherwise it wouldn't
have shown up). It was picked up by a vigilant journal editor.

My solution was to attack the EPS output file with a flint axe to sort
out the errant window. I didn't have any trouble getting the y-axis to
be on the left hand side it was just that a bit of it hung off the edge.

I was actually doing traditional contour plots rather than full colour.

I did have a problem with excessive white space above and to the right
of the plots. I'd be interested in any more wholesome ways to fix this!

--
Martin Brown