On Thursday, 6 September 2018 at 15:36:12 UTC+2, setala wrote:
> Thanks Steve, I got it working!
>
> Regards,
>
> --Saku OH6PU

I am new to PS2200, and I have tried Steve Rikards instruction:
"Here are the steps to allow telnet access to ps2200 in ROS."
I started telnet on Windows 10, and from on the ROS consol I entered:

cs a
st cpcomm,,,0/security
0-ENTER C.L. FOR : .CPCOMM
st silas,,,0/security
1-ENTER C.L. FOR : .SILAS
putty;host 127.0.0.3;select telcon (port 23)
KEY ERROR
Command:

I would like to be able to have FTP access to ps2200 on port 21 as well.

WS_FTP Professional worked well with ClearPath MCP Express (host type Unisys A-series) and
it has setting for host type OS2200.

Any help would be much appreciated.

Best regards,
Einar Flaathe

On Saturday, 29 April 2023 at 17:34:35 UTC+2, Einar Flaathe wrote:
> On Thursday, 6 September 2018 at 15:36:12 UTC+2, setala wrote:
> > Thanks Steve, I got it working!
> >
> > Regards,
> >
> > --Saku OH6PU
> I am new to PS2200, and I have tried Steve Rikards instruction:
> "Here are the steps to allow telnet access to ps2200 in ROS."
> I started telnet on Windows 10, and from on the ROS consol I entered:
>
> cs a
> st cpcomm,,,0/security
> 0-ENTER C.L. FOR : .CPCOMM
> st silas,,,0/security
> 1-ENTER C.L. FOR : .SILAS
> putty;host 127.0.0.3;select telcon (port 23)
> KEY ERROR
> Command:
>
> I would like to be able to have FTP access to ps2200 on port 21 as well.
>
> WS_FTP Professional worked well with ClearPath MCP Express (host type Unisys A-series) and
> it has setting for host type OS2200.
>
> Any help would be much appreciated.
>
> Best regards,
> Einar Flaathe

I had another go - but it's still not working, viz:
ROS consol
cs a
st cpcomm,,,0/security
0-ENTER C.L. FOR : .CPCOMM
st silas,,,0/security
1-ENTER C.L. FOR : .SILAS
Command:

Microsoft Telnet> o
( to ) 127.0.0.3
Connecting To 127.0.0.3...Could not open connection to the host, on port 23: Connect failed
Microsoft Telnet>

Einar

On 4/29/2023 2:53 PM, Einar Flaathe wrote:
> On Saturday, 29 April 2023 at 17:34:35 UTC+2, Einar Flaathe wrote:
>> On Thursday, 6 September 2018 at 15:36:12 UTC+2, setala wrote:
>>> Thanks Steve, I got it working!
>>>
>>> Regards,
>>>
>>> --Saku OH6PU
>> I am new to PS2200, and I have tried Steve Rikards instruction:
>> "Here are the steps to allow telnet access to ps2200 in ROS."
>> I started telnet on Windows 10, and from on the ROS consol I entered:
>>
>> cs a
>> st cpcomm,,,0/security
>> 0-ENTER C.L. FOR : .CPCOMM
>> st silas,,,0/security
>> 1-ENTER C.L. FOR : .SILAS
>> putty;host 127.0.0.3;select telcon (port 23)
>> KEY ERROR
>> Command:
>>
>> I would like to be able to have FTP access to ps2200 on port 21 as well.
>>
>> WS_FTP Professional worked well with ClearPath MCP Express (host type Unisys A-series) and
>> it has setting for host type OS2200.
>>
>> Any help would be much appreciated.
>>
>> Best regards,
>> Einar Flaathe
>
> I had another go - but it's still not working, viz:
> ROS consol
> cs a
> st cpcomm,,,0/security
> 0-ENTER C.L. FOR : .CPCOMM
> st silas,,,0/security
> 1-ENTER C.L. FOR : .SILAS
> Command:
>
> Microsoft Telnet> o
> ( to ) 127.0.0.3
> Connecting To 127.0.0.3...Could not open connection to the host, on port 23: Connect failed
> Microsoft Telnet>

Are you answering the outstanding messages asking for the CLs?

--
- Stephen Fuld
(e-mail address disguised to prevent spam)

On Sunday, 30 April 2023 at 04:20:00 UTC+2, Stephen Fuld wrote:
> On 4/29/2023 2:53 PM, Einar Flaathe wrote:
> > On Saturday, 29 April 2023 at 17:34:35 UTC+2, Einar Flaathe wrote:
> >> On Thursday, 6 September 2018 at 15:36:12 UTC+2, setala wrote:
> >>> Thanks Steve, I got it working!
> >>>
> >>> Regards,
> >>>
> >>> --Saku OH6PU
> >> I am new to PS2200, and I have tried Steve Rikards instruction:
> >> "Here are the steps to allow telnet access to ps2200 in ROS."
> >> I started telnet on Windows 10, and from on the ROS consol I entered:
> >>
> >> cs a
> >> st cpcomm,,,0/security
> >> 0-ENTER C.L. FOR : .CPCOMM
> >> st silas,,,0/security
> >> 1-ENTER C.L. FOR : .SILAS
> >> putty;host 127.0.0.3;select telcon (port 23)
> >> KEY ERROR
> >> Command:
> >>
> >> I would like to be able to have FTP access to ps2200 on port 21 as well.
> >>
> >> WS_FTP Professional worked well with ClearPath MCP Express (host type Unisys A-series) and
> >> it has setting for host type OS2200.
> >>
> >> Any help would be much appreciated.
> >>
> >> Best regards,
> >> Einar Flaathe
> >
> > I had another go - but it's still not working, viz:
> > ROS consol
> > cs a
> > st cpcomm,,,0/security
> > 0-ENTER C.L. FOR : .CPCOMM
> > st silas,,,0/security
> > 1-ENTER C.L. FOR : .SILAS
> > Command:
> >
> > Microsoft Telnet> o
> > ( to ) 127.0.0.3
> > Connecting To 127.0.0.3...Could not open connection to the host, on port 23: Connect failed
> > Microsoft Telnet>
> Are you answering the outstanding messages asking for the CLs?
>
>
>
> --
> - Stephen Fuld
> (e-mail address disguised to prevent spam)

Thank you for your reply!

I am new to ClearPath OS 2200 and - No I did not answer the outstanding messages.

I searched ClearPath OS 2200 Release 18.0 Product Documentation Library
for ‘ENTER C.L. FOR :’ and found it in three places.
I learned that it was a ‘read-and-reply message’

The System Console Message reference Manual had:
The responses to this solicitation are the clearance level, blanks, or a null. A null
response or blanks receives the minimum clearance level for the user-id.

And FLIT Programming Reference Manual, Volume 2: System Mode had an example:
ST SYS$*RUN$.CONSOL,,,0/SECURITY
0-ENTER C.L. FOR : SYS$*RUN$.CONSOL
0 0

So I copied the answer and now the telnet session is established, but
I cannot see what I am typing… and I do not know the PS2200
command to exit Telnet.

But why reply with two zeros not just one?
(Clearance levels can range from 0 to 63, with 63 being the most restrictive.)

Here all the events:

ROS CONSOLE
cs a
st cpcomm,,,0/security
ENTER C.L. FOR : .CPCOMM
0 0
CPCOMM START
CPCOMM*CCB105500: Configuration processing is complete.
CPCOMM* Number of errors: 0
CPCOMM*CCB109001: CPCommOS is ready.
CPCOMM*CCB109005: CPCommOS to XNIOP interface initialization complete.
CPCOMM* XNIOP level: 5.24.1
st silas,,,0/security
ENTER C.L. FOR : .SILAS
0 0
SILAS START
SILAS *System Interface for Legacy Application Systems
SILAS * 3R5 3-50-5 30 APR 23 13:01:40 MODE A SITE PART-1
SILAS *Config version: WRC002
SILAS *Trace file opened : SILAS$A*TRACE(1)
SILAS *Log file opened : SILAS$A*LOG(1)
SILAS *PROCESS CSACSU is up.
SILAS *PROCESS RSDCSU is up.
CPCOMM*CCB121000: Process CSACSU has attached.
SILAS *CSACSU is attached to the TP0 interface.
CPCOMM*CCB121000: Process TELRSI has attached.
SILAS *RSDCSU is attached to the TELNET interface.
CPCOMM*CCB121000: Process RSDCSU has attached.
SILAS *RSDCSU is attached to the TP0 interface.
SILAS *Failed to connect with MCB # 01.
SILAS *Failed to connect with MCB # 03.
SILAS *PROCESS TIPCSU is up.
CPCOMM*CCB121000: Process TIPCSU has attached.
SILAS *TIPCSU is attached to the TP0 interface.
Command:

WINDOWS
Welcome to Microsoft Telnet Client

Escape Character is 'CTRL+¨'

Microsoft Telnet> o
( to ) 127.0.0.3

Enter your user-id/password and clearance level:
>
*UNISYS 1100 Operating System Level 49R4.30PSE (RSI)*
Current session number: 194
Previous session was: SUN 30 APR 2023 13:02:48 CEST
>

Thanks once again!

On 4/30/2023 4:50 AM, Einar Flaathe wrote:
> On Sunday, 30 April 2023 at 04:20:00 UTC+2, Stephen Fuld wrote:
>> On 4/29/2023 2:53 PM, Einar Flaathe wrote:
>>> On Saturday, 29 April 2023 at 17:34:35 UTC+2, Einar Flaathe wrote:
>>>> On Thursday, 6 September 2018 at 15:36:12 UTC+2, setala wrote:
>>>>> Thanks Steve, I got it working!
>>>>>
>>>>> Regards,
>>>>>
>>>>> --Saku OH6PU
>>>> I am new to PS2200, and I have tried Steve Rikards instruction:
>>>> "Here are the steps to allow telnet access to ps2200 in ROS."
>>>> I started telnet on Windows 10, and from on the ROS consol I entered:
>>>>
>>>> cs a
>>>> st cpcomm,,,0/security
>>>> 0-ENTER C.L. FOR : .CPCOMM
>>>> st silas,,,0/security
>>>> 1-ENTER C.L. FOR : .SILAS
>>>> putty;host 127.0.0.3;select telcon (port 23)
>>>> KEY ERROR
>>>> Command:
>>>>
>>>> I would like to be able to have FTP access to ps2200 on port 21 as well.
>>>>
>>>> WS_FTP Professional worked well with ClearPath MCP Express (host type Unisys A-series) and
>>>> it has setting for host type OS2200.
>>>>
>>>> Any help would be much appreciated.
>>>>
>>>> Best regards,
>>>> Einar Flaathe
>>>
>>> I had another go - but it's still not working, viz:
>>> ROS consol
>>> cs a
>>> st cpcomm,,,0/security
>>> 0-ENTER C.L. FOR : .CPCOMM
>>> st silas,,,0/security
>>> 1-ENTER C.L. FOR : .SILAS
>>> Command:
>>>
>>> Microsoft Telnet> o
>>> ( to ) 127.0.0.3
>>> Connecting To 127.0.0.3...Could not open connection to the host, on port 23: Connect failed
>>> Microsoft Telnet>
>> Are you answering the outstanding messages asking for the CLs?
>>
>>
>>
>> --
>> - Stephen Fuld
>> (e-mail address disguised to prevent spam)
>
> Thank you for your reply!
>
> I am new to ClearPath OS 2200 and - No I did not answer the outstanding messages.
>
> I searched ClearPath OS 2200 Release 18.0 Product Documentation Library
> for ‘ENTER C.L. FOR :’ and found it in three places.
> I learned that it was a ‘read-and-reply message’
>
> The System Console Message reference Manual had:
> The responses to this solicitation are the clearance level, blanks, or a null. A null
> response or blanks receives the minimum clearance level for the user-id.
>
> And FLIT Programming Reference Manual, Volume 2: System Mode had an example:
> ST SYS$*RUN$.CONSOL,,,0/SECURITY
> 0-ENTER C.L. FOR : SYS$*RUN$.CONSOL
> 0 0
>
> So I copied the answer and now the telnet session is established, but
> I cannot see what I am typing… and I do not know the PS2200
> command to exit Telnet.
>
> But why reply with two zeros not just one?

The first zero indicates to which read and reply message you are
responding. If you go back to your first example, the read and reply
message for Silas started with "1". Since you didn't reply to the first
one (from CONSOL), the second one incremented the reply number. This
allows you to have multiple messages outstanding, either from the same
or different applications, and for the OS to know to which message your
reply is intended. That is, you could have replied to the message about
Silas by starting your reply with a 1 instead of 0. In the second
example, since you replied to the message from CONSOL, before you
started Silas, the message from SILAS could start at zero again. The
second zero is the actual reply, in this case the clearance level of 0.

snip

> Thanks once again!

You're welcome. And Welcome to the 2200 community!

--
- Stephen Fuld
(e-mail address disguised to prevent spam)