I recently was looking for the RMAC error codes and was referred to the "CP/M Programmer's Utilities Guide" which I found online and downloaded however it seems to be missing pages (259-274). I found others online and they all seem to be missing the same pages.
Does anyone have a copy of this manual that isn't missing those pages?

The physical copy I have, which is part of the CP/M Plus documentation bundle, ends on page 256 (End of Appendix F). Then follows the index, pages 257-265. Those are the "logical page numbers" (as printed on the pages). I'm not sure how those pages are numbered physically, in a PDF. My copy shows the MAC/RMAC Error Messages as "Appendix A" starting on (logical) page 241. "Section 17" is the last "chapter" of the book, before appendices.

Do you have a URL for the “CP/M Plus documentation bundle”? I googled for it but the ones I found are ether missing the “Programmer’s Utilities Guide” or contained the same doc that I have with the missing pages.

The index at the beginning says Appendixes: “A - MAC/RMAC Error Messages ...................................... 265”

Oh, also says “ First Edition: September 1982 ” after the title page.

If noting else could you post the RMAC error codes?

I don't have this scanned, and don't have any decent document scanning equipment, but it looks like the appendices are just a few pages so I could scan just those manually. The copy I have is "First Edition: September 1982" also.

I have scanned the appendices into a PDF and posted here: http://sebhc.durgadas.com/cpm_P_U_G_appx.pdf

This was a 300dpi "B&W Text" scan, no OCR was done.

On Tuesday, August 23, 2022 at 4:42:21 PM UTC-7, Douglas Miller wrote:
> I have scanned the appendices into a PDF and posted here: http://sebhc.durgadas.com/cpm_P_U_G_appx.pdf
> This was a 300dpi "B&W Text" scan, no OCR was done.

Excellent! Exactly what I needed. Thanks!

Sent from GeoWar’s iPad Pro

On Tuesday, August 23, 2022 at 8:01:53 PM UTC-6, geo...@mac.com wrote:
> On Tuesday, August 23, 2022 at 4:42:21 PM UTC-7, Douglas Miller wrote:
> > I have scanned the appendices into a PDF and posted here: http://sebhc.durgadas.com/cpm_P_U_G_appx.pdf
> > This was a 300dpi "B&W Text" scan, no OCR was done.
> Excellent! Exactly what I needed. Thanks!
>
> Sent from GeoWar’s iPad Pro

It's all here

https://archive.org/details/h42_Digital_Research_Programmers_Utilities_Guide_for_the_CP-M_Family_of_Operating_Sy/mode/2up

On Tuesday, August 23, 2022 at 8:38:50 PM UTC-7, sc...@mischko.com wrote:
> On Tuesday, August 23, 2022 at 8:01:53 PM UTC-6, geo...@mac.com wrote:
> > On Tuesday, August 23, 2022 at 4:42:21 PM UTC-7, Douglas Miller wrote:
> > > I have scanned the appendices into a PDF and posted here: http://sebhc.durgadas.com/cpm_P_U_G_appx.pdf
> > > This was a 300dpi "B&W Text" scan, no OCR was done.
> > Excellent! Exactly what I needed. Thanks!
> >
> > Sent from GeoWar’s iPad Pro
> It's all here
>
> https://archive.org/details/h42_Digital_Research_Programmers_Utilities_Guide_for_the_CP-M_Family_of_Operating_Sy/mode/2up

Got it… Thanks!

George Warner <geowar1@mac.com> writes:
> I recently was looking for the RMAC error codes and was referred to the "CP=
> /M Programmer's Utilities Guide" which I found online and downloaded howeve=
> r it seems to be missing pages (259-274). I found others online and they al=
> l seem to be missing the same pages.
> Does anyone have a copy of this manual that isn't missing those pages?

I wonder if the ASM86 error messages from CPM-86 would be equivalent?

Very strange that the complete appendices A, B and C are missing. I'd
almost consider it to be deliberate.

Jack
--
My wife says I have two faults:
I don't listen and something else.