Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  nodelist  faq  login

Your code should be more efficient!


computers / comp.graphics.apps.gnuplot / Re: 3D plot

SubjectAuthor
* 3D plotDieter Britz
`* Re: 3D plotau76666
 `* Re: 3D plotau76666
  `* Re: 3D plotChris Elvidge
   +* Re: 3D plotJörg_Buchholz
   |`* Re: 3D plotau76666
   | `* Re: 3D plotJörg_Buchholz
   |  `* Re: 3D plotau76666
   |   `- Re: 3D plotJörg_Buchholz
   `- Re: 3D plotau76666

1
Subject: 3D plot
From: Dieter Britz
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Tue, 29 Oct 2019 09:30 UTC
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: dieterha...@gmail.com (Dieter Britz)
Newsgroups: comp.graphics.apps.gnuplot
Subject: 3D plot
Date: Tue, 29 Oct 2019 09:30:50 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 31
Message-ID: <qp90sa$svb$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Tue, 29 Oct 2019 09:30:50 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="3e63ff15f159b098a29e17a3973cf178";
logging-data="29675"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX18nZ6j9ubYKFTsr5gPSYZeMbzOEQjtENeU="
User-Agent: Pan/0.144 (Time is the enemy; 28ab3ba git.gnome.org/pan2)
Cancel-Lock: sha1:vGrj0t5Mq8jhJclEupV5g/nUIFw=
View all headers
I have this script:

gnuplot << eoi
set term postscript enh eps 24
set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1
set ytics 0, 0.5, 1
set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key
splot 'data/CDsL1.dat' w l lt 1
quit
eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
  lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
  at the bottom?
3 The orientation is not bad as is, but I tried to play with
  the angle of view, e.g. using
  splot 'data/CDsL1.dat' w l lt 1 rotate=pi
  and there was an error with rotate. How is that done?

--
Dieter Britz


Subject: Re: 3D plot
From: au76666
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Thu, 31 Oct 2019 10:33 UTC
References: 1
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bri...@chem.au.dk (au76666)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Thu, 31 Oct 2019 10:33:54 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 30
Message-ID: <qpedai$2he$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Thu, 31 Oct 2019 10:33:54 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="c4dfd488a7708b55be20822c1db9c62e";
logging-data="2606"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX18HafCBDSgrpG1q7V04qFDykTXpxYjRC9Q="
User-Agent: Pan/0.144 (Time is the enemy; 28ab3ba git.gnome.org/pan2)
Cancel-Lock: sha1:Vh2Rb6tG5zPgI0AcokkzSjJBZ/s=
View all headers
On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
  lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
  at the bottom?
3 The orientation is not bad as is, but I tried to play with
  the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
  rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see
now (same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that
they don't touch the grid line.

--
Dieter Britz


Subject: Re: 3D plot
From: au76666
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Thu, 31 Oct 2019 13:11 UTC
References: 1 2
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bri...@chem.au.dk (au76666)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Thu, 31 Oct 2019 13:11:10 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 36
Message-ID: <qpemhe$pv8$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Thu, 31 Oct 2019 13:11:10 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="c4dfd488a7708b55be20822c1db9c62e";
logging-data="26600"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1+yGfDa+1xWN+2sTFDwZ2jF0fg0dmc11Mc="
User-Agent: Pan/0.144 (Time is the enemy; 28ab3ba git.gnome.org/pan2)
Cancel-Lock: sha1:TUTuD4Qiaj3kanXW/zZZLVhlwzU=
View all headers
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
  lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
  at the bottom?
3 The orientation is not bad as is, but I tried to play with
  the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
  rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see now
(same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that they
don't touch the grid line.

Forget it, I have worked around it.



--
Dieter Britz


Subject: Re: 3D plot
From: Chris Elvidge
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Thu, 31 Oct 2019 14:27 UTC
References: 1 2 3
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: chr...@mshome.net (Chris Elvidge)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Thu, 31 Oct 2019 14:27:34 +0000
Organization: A noiseless patient Spider
Lines: 41
Message-ID: <qper0n$kqo$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Injection-Date: Thu, 31 Oct 2019 14:27:35 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="3a6a28702a86f62ff37e2815cee1e5e7";
logging-data="21336"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX193heHcroLP0VIZOopPS7jOyAJRyqVyKz0="
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101
Thunderbird/52.2.1
Cancel-Lock: sha1:FXNR8SMBHsUGH8DdmY14Kuxl7rA=
In-Reply-To: <qpemhe$pv8$1@dont-email.me>
Content-Language: en-GB
View all headers
On 31/10/2019 13:11, au76666 wrote:
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
   lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
   at the bottom?
3 The orientation is not bad as is, but I tried to play with
   the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
   rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see now
(same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that they
don't touch the grid line.

Forget it, I have worked around it.



Please tell ......


--

Chris Elvidge, England


Subject: Re: 3D plot
From: Jörg_Buchholz
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Fri, 1 Nov 2019 07:20 UTC
References: 1 2 3 4
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bookwood...@freenet.de (Jörg_Buchholz)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Fri, 1 Nov 2019 08:20:41 +0100
Organization: A noiseless patient Spider
Lines: 46
Message-ID: <qpgmc5$pnb$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Injection-Date: Fri, 1 Nov 2019 07:20:37 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="3599d97f731c303ade4f879f557c7b3d";
logging-data="26347"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1+PhulC8SVoutOR8D9P2VYnVuF/kUiBV3I="
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:60.0) Gecko/20100101
Thunderbird/60.9.0
Cancel-Lock: sha1:LgOhIZv7lvB0SvRKDg+jhJPJeR4=
In-Reply-To: <qper0n$kqo$1@dont-email.me>
Content-Language: en-GB
View all headers
On 31.10.2019 15:27, Chris Elvidge wrote:
On 31/10/2019 13:11, au76666 wrote:
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
   lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
   at the bottom?
3 The orientation is not bad as is, but I tried to play with
   the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
   rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see now
(same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that they
don't touch the grid line.

Forget it, I have worked around it.



Please tell ......


Nobody needs a "work around" for that. See help xtics and use the
"offset". It's simple.

Jörg





Subject: Re: 3D plot
From: au76666
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Fri, 1 Nov 2019 10:29 UTC
References: 1 2 3 4 5
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bri...@chem.au.dk (au76666)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Fri, 1 Nov 2019 10:29:58 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 51
Message-ID: <qph1f6$mnj$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me>
<qpgmc5$pnb$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Fri, 1 Nov 2019 10:29:58 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="08aa2ad7f35554135eac03af83c2a8ee";
logging-data="23283"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/oTi9xZDvYMavfRXS0gXK8GOtC4QB8blw="
User-Agent: Pan/0.144 (Time is the enemy; 28ab3ba git.gnome.org/pan2)
Cancel-Lock: sha1:LvZwyzBmhTCxcRZgQxi2cuYVHqM=
View all headers
On Fri, 01 Nov 2019 08:20:41 +0100, Jörg Buchholz wrote:

On 31.10.2019 15:27, Chris Elvidge wrote:
On 31/10/2019 13:11, au76666 wrote:
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
   lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
   at the bottom?
3 The orientation is not bad as is, but I tried to play with
   the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
   rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see now
(same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that they
don't touch the grid line.

Forget it, I have worked around it.



Please tell ......


Nobody needs a "work around" for that. See help xtics and use the
"offset". It's simple.

Jörg

I tried that and the numbers got shifted left but still touching
the grid line. No doubt I have misread the specs.

--
Dieter Britz


Subject: Re: 3D plot
From: au76666
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Fri, 1 Nov 2019 10:36 UTC
References: 1 2 3 4
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bri...@chem.au.dk (au76666)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Fri, 1 Nov 2019 10:36:49 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 52
Message-ID: <qph1s1$mnj$2@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Fri, 1 Nov 2019 10:36:49 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="08aa2ad7f35554135eac03af83c2a8ee";
logging-data="23283"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/wfKtUi1OtRdefOF45TyD9O/5Y0g56gTc="
User-Agent: Pan/0.144 (Time is the enemy; 28ab3ba git.gnome.org/pan2)
Cancel-Lock: sha1:lUQh+9MNghqLz+phvIqProCwuJc=
View all headers
On Thu, 31 Oct 2019 14:27:34 +0000, Chris Elvidge wrote:

On 31/10/2019 13:11, au76666 wrote:
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
   lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
   at the bottom?
3 The orientation is not bad as is, but I tried to play with
   the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
   rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see now
(same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that they
don't touch the grid line.

Forget it, I have worked around it.



Please tell ......

I hate to admit my clumsy solution, but I asked for no xtics and placed
the numbers "manually" with label ".." at ... Actually this had the
advantage that it fixed the zero mark at the origin, so that it now
refers to both X and Z axes, whereas before, gnuplot left out the zero
for the Z axis, even though I specified 0, 10, 20 for that. So it's not
totally crazy, I think. It did eliminate the tic mark at X = 0.5, but
the plot is so dense there that I don't think that will be noticed.

I'm not complaining, but I did all this because there seemed to be no
response to my question for days. I understand that you are all busy.

--
Dieter Britz


Subject: Re: 3D plot
From: Jörg_Buchholz
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Fri, 1 Nov 2019 13:33 UTC
References: 1 2 3 4 5 6
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bookwood...@freenet.de (Jörg_Buchholz)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Fri, 1 Nov 2019 14:33:16 +0100
Organization: A noiseless patient Spider
Lines: 55
Message-ID: <qphc6s$okf$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me>
<qpgmc5$pnb$1@dont-email.me> <qph1f6$mnj$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Injection-Date: Fri, 1 Nov 2019 13:33:16 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="113f7f5ddc28673b01cf4a96bd1451bb";
logging-data="25231"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX18IK1gwIloGbRK9lwHoMNLaYEIiB82aL1w="
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Thunderbird/60.9.0
Cancel-Lock: sha1:xJEs4raufc+6D0FOzr8vKKJXVsY=
In-Reply-To: <qph1f6$mnj$1@dont-email.me>
Content-Language: en-GB
View all headers
On 01/11/2019 11:29, au76666 wrote:
On Fri, 01 Nov 2019 08:20:41 +0100, Jörg Buchholz wrote:

On 31.10.2019 15:27, Chris Elvidge wrote:
On 31/10/2019 13:11, au76666 wrote:
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output 'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
   lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
   at the bottom?
3 The orientation is not bad as is, but I tried to play with
   the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
   rotate=pi and there was an error with rotate. How is that done?

I found out how to lower the whole plot. But that, as you can see now
(same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that they
don't touch the grid line.

Forget it, I have worked around it.



Please tell ......


Nobody needs a "work around" for that. See help xtics and use the
"offset". It's simple.

Jörg

I tried that and the numbers got shifted left but still touching
the grid line. No doubt I have misread the specs.


You can specify the offset for x y and z coordinates. For what do you
specify the offset?

Jörg


Subject: Re: 3D plot
From: au76666
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Fri, 1 Nov 2019 14:11 UTC
References: 1 2 3 4 5 6 7
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bri...@chem.au.dk (au76666)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Fri, 1 Nov 2019 14:11:46 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 65
Message-ID: <qphef2$5m2$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me>
<qpgmc5$pnb$1@dont-email.me> <qph1f6$mnj$1@dont-email.me>
<qphc6s$okf$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Fri, 1 Nov 2019 14:11:46 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="08aa2ad7f35554135eac03af83c2a8ee";
logging-data="5826"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/S7pWSQh+e659V5404xYXYcVxaDk8PgRE="
User-Agent: Pan/0.144 (Time is the enemy; 28ab3ba git.gnome.org/pan2)
Cancel-Lock: sha1:GZ5nYZU+9aWXYH7bRv4OUjRWfWY=
View all headers
On Fri, 01 Nov 2019 14:33:16 +0100, Jörg Buchholz wrote:

On 01/11/2019 11:29, au76666 wrote:
On Fri, 01 Nov 2019 08:20:41 +0100, Jörg Buchholz wrote:

On 31.10.2019 15:27, Chris Elvidge wrote:
On 31/10/2019 13:11, au76666 wrote:
On Thu, 31 Oct 2019 10:33:54 +0000, au76666 wrote:

On Tue, 29 Oct 2019 09:30:50 +0000, Dieter Britz wrote:

I have this script:

gnuplot << eoi set term postscript enh eps 24 set output
'CDL1.eps'
set title 'CD, L = 1'
set xrange [0:1.0]
set yrange [0:1.0]
set xtics 0, 0.5, 1 set ytics 0, 0.5, 1 set xlabel "X"
set ylabel "Y"
set zlabel "cd"
unset key splot 'data/CDsL1.dat' w l lt 1 quit eoi

The result is here: http://dieterbritz.dk/CDL1.pdf

1. How do I move the x-axis labels (0, 0.5, 1) a bit
   lower down so that the 0.5 doesn't hit the base line?
2. How do I lower the plot so that the zero level is right
   at the bottom?
3 The orientation is not bad as is, but I tried to play with
   the angle of view, e.g. using splot 'data/CDsL1.dat' w l lt 1
   rotate=pi and there was an error with rotate. How is that
   done?

I found out how to lower the whole plot. But that, as you can see
now (same link) wiped out the zero axis marker for Z. Why is this?
And I still want to know how to shift the X-axis numbers so that
they don't touch the grid line.

Forget it, I have worked around it.



Please tell ......


Nobody needs a "work around" for that. See help xtics and use the
"offset". It's simple.

Jörg

I tried that and the numbers got shifted left but still touching the
grid line. No doubt I have misread the specs.


You can specify the offset for x y and z coordinates. For what do you
specify the offset?

Jörg

The numbers under the x axis. Without an offset, they just touch the
grid line at Y = 0.

--
Dieter Britz


Subject: Re: 3D plot
From: Jörg_Buchholz
Newsgroups: comp.graphics.apps.gnuplot
Organization: A noiseless patient Spider
Date: Fri, 1 Nov 2019 15:50 UTC
References: 1 2 3 4 5 6 7 8
Path: i2pn2.org!i2pn.org!eternal-september.org!feeder.eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: bookwood...@freenet.de (Jörg_Buchholz)
Newsgroups: comp.graphics.apps.gnuplot
Subject: Re: 3D plot
Date: Fri, 1 Nov 2019 16:50:03 +0100
Organization: A noiseless patient Spider
Lines: 30
Message-ID: <qphk7b$94n$1@dont-email.me>
References: <qp90sa$svb$1@dont-email.me> <qpedai$2he$1@dont-email.me>
<qpemhe$pv8$1@dont-email.me> <qper0n$kqo$1@dont-email.me>
<qpgmc5$pnb$1@dont-email.me> <qph1f6$mnj$1@dont-email.me>
<qphc6s$okf$1@dont-email.me> <qphef2$5m2$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
Injection-Date: Fri, 1 Nov 2019 15:50:03 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="4aa19063ea0770ec41a9194de1665927";
logging-data="9367"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/MPAHs3jV88VmP/utbeqoKhSxTWkw5FOI="
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101
Thunderbird/60.9.0
Cancel-Lock: sha1:hYaUBP/41TzxzaKOam7eL+PL9ZU=
In-Reply-To: <qphef2$5m2$1@dont-email.me>
Content-Language: en-GB
View all headers
On 01/11/2019 15:11, au76666 wrote:

Nobody needs a "work around" for that. See help xtics and use the
"offset". It's simple.

Jörg

I tried that and the numbers got shifted left but still touching the
grid line. No doubt I have misread the specs.


You can specify the offset for x y and z coordinates. For what do you
specify the offset?

Jörg

The numbers under the x axis. Without an offset, they just touch the
grid line at Y = 0.


Yes, of course

set xtics offset first 0,0,-5
This place the tic labels from the x-axis in the negative z-direction.

set xtics offset 0,-1
This place the tic labels from the x-axis in the negative y-direction.

Jörg



1
rocksolid light 0.7.2
clearneti2ptor