novaBBS - comp.arch.embedded - decoupling the ADC reference on 16F15344

decoupling the ADC reference on 16F15344

<sm8r9k$1q5g$1@gioia.aioe.org>

https://www.novabbs.com/devel/article-flat.php?id=712&group=comp.arch.embedded#712

copy link Newsgroups: comp.arch.embedded

Path: i2pn2.org!i2pn.org!aioe.org!D7rKqBrQDbvzGwXC96Ljhg.user.46.165.242.91.POSTED!not-for-mail
From: klamm...@NOSPAM.a1.net (Johann Klammer)
Newsgroups: comp.arch.embedded
Subject: decoupling the ADC reference on 16F15344
Date: Sun, 07 Nov 2021 16:27:34 +0100
Organization: Aioe.org NNTP Server
Message-ID: <sm8r9k$1q5g$1@gioia.aioe.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Injection-Info: gioia.aioe.org; logging-data="59568"; posting-host="D7rKqBrQDbvzGwXC96Ljhg.user.gioia.aioe.org"; mail-complaints-to="abuse@aioe.org";
User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Icedove/24.5.0
X-Notice: Filtered by postfilter v. 0.9.2

by: Johann Klammer - Sun, 7 Nov 2021 15:27 UTC

Hello,

I would like to know if there's a way to output the internal
adc vref(1.024 or 2.048 V) onto the vref+ pin, to attach an external
decoupling capacitor. The Datasheet is a bit unclear on this.
There's a bit to connect the ext aref pin from adc vref, but I think
that just uses vhatever voltage is there externally.
(ADPREF in ADCON1). There's also the DAC1OE2 bit in DAC1CON0,
but they don't really say on what pin that shows up.
DAC1OUT2 is not in the pin list.

Regards,
Johann

panic: kernel trap (ignored)

devel / comp.arch.embedded / decoupling the ADC reference on 16F15344

Subject	Author
decoupling the ADC reference on 16F15344	Johann Klammer