In article <5984051a06dave@davenoise.co.uk>,
Dave Plowman (News) <dave@davenoise.co.uk> wrote:
> Just a final question or two.

> The package I bought from R-Comp was tailored to what I wanted. IIRC, has
> a cut down version of Messenger Pro. It is Messenger NF 5.4.00

> I've got it working not only with imap to 123-reg, but also with my other
> BT email address. Making Pluto redundant for email. But will likely keep
> it for News.

> So would the full latest version give me goodies I can use?

> And does Netfetch - which came as part of the package - do anything at
> all? Both of my email were configured only using RemoteNB.

Seem to have got an answer to my own question. After working OK for a
couple of days with both email suppliers, get an error from Messenger
saying this version doesn't support multiple clients. ;-)

--
*Beware - animal lover - brakes for pussy*

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

In message <5985089c5edave@davenoise.co.uk>
"Dave Plowman (News)" <dave@davenoise.co.uk> wrote:

> Seem to have got an answer to my own question. After working OK for a
> couple of days with both email suppliers, get an error from Messenger
> saying this version doesn't support multiple clients. ;-)

It supports multiple clients but NOT multiple SMTP servers so sending
emails via a different SMTP server is not supported but you can send via
one SMTP server if your ISP allows that and which was communicated here
many weeks ago.

--
Experience the future using ARM Technology - ARMBook,BeagleBoard -xM,
PandaBoard,Raspberry Pi,iMX6/ARMX6,IGEPv5 & Titanium powered by RISC OS
5.28.

On 26 Oct, Chris Hughes wrote in message
<aff6718159.chris@mytarbis.plus.com>:

> Dave, within the Messenger Pro Zip file you would have got is a Tips
> folder, explaining how you would configure IMAP for Gmail or
> Hotmail(Outlook.com) for instance, the process is basically the same as
> Paul has suggested.

Whereabouts is this Tips sheet? It sounds useful, but I'm looking in the
Zips for M-Pro 8.0x and can't see it anywhere.

--
Steve Fryatt - Leeds, England

http://www.stevefryatt.org.uk/

On 2 Nov, Doug Webb wrote in message
<e7082d8559.dougjwebb@btinternet.com>:

> It supports multiple clients but NOT multiple SMTP servers so sending
> emails via a different SMTP server is not supported but you can send via
> one SMTP server if your ISP allows that and which was communicated here
> many weeks ago.

Hermes supports multiple outpgoing SMTP servers, doesn't it?

--
Steve Fryatt - Leeds, England

http://www.stevefryatt.org.uk/

In article
<mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>, Steve
Fryatt <news@stevefryatt.org.uk> wrote:

> Hermes supports multiple outpgoing SMTP servers, doesn't
> it?

Yes, it does but only if you tell it a unique string of
characters from the Addresses part of the Edit SMTP account
window.

For over a year now I've wondered why I couldn't get Hermes
to send to the native SMTP server for two of my additional
addresses. It was only when setting up a Gmail address that
I found this wrinkle.

John

--
John
newsmcc@blueyonder.co.uk
j dot mccartney atte blueyonder dot co dot uk

In article <59853edb75newsmcc@blueyonder.co.uk>, John
<newsmcc@blueyonder.co.uk> wrote:

> Yes, it does but only if you tell it a unique string of
> characters from the Addresses part of the Edit SMTP
> account window.

....a unique string of characters from the email address in
the Addresses part...

Brain fade!

John

--
John
newsmcc@blueyonder.co.uk
j dot mccartney atte blueyonder dot co dot uk

In message <mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>
Steve Fryatt <news@stevefryatt.org.uk> wrote:

> On 2 Nov, Doug Webb wrote in message
> <e7082d8559.dougjwebb@btinternet.com>:

>> It supports multiple clients but NOT multiple SMTP servers so sending
>> emails via a different SMTP server is not supported but you can send via
>> one SMTP server if your ISP allows that and which was communicated here
>> many weeks ago.

> Hermes supports multiple outpgoing SMTP servers, doesn't it?

Yes in the full version, but Dave Plowman, has the cut-down version as
supplied with his version of Messenger Pro, which seems to be a fairly old
version.

--
Chris Hughes

In message <mpro.r1yhwx02p1k6o01p1.news@stevefryatt.org.uk>
Steve Fryatt <news@stevefryatt.org.uk> wrote:

> On 26 Oct, Chris Hughes wrote in message
> <aff6718159.chris@mytarbis.plus.com>:

>> Dave, within the Messenger Pro Zip file you would have got is a Tips
>> folder, explaining how you would configure IMAP for Gmail or
>> Hotmail(Outlook.com) for instance, the process is basically the same as
>> Paul has suggested.

> Whereabouts is this Tips sheet? It sounds useful, but I'm looking in the
> Zips for M-Pro 8.0x and can't see it anywhere.

Tips Folder not sheet. There are 8 different tips files for things like
Gmail, Hotmail, Marcel, Pluto, Saving, etc. They are all plain text files.

--
Chris Hughes

In article <666a408559.chris@mytarbis.plus.com>,
Chris Hughes <news13@noonehere.co.uk> wrote:
> In message <mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>
> Steve Fryatt <news@stevefryatt.org.uk> wrote:

> > On 2 Nov, Doug Webb wrote in message
> > <e7082d8559.dougjwebb@btinternet.com>:

> >> It supports multiple clients but NOT multiple SMTP servers so sending
> >> emails via a different SMTP server is not supported but you can send via
> >> one SMTP server if your ISP allows that and which was communicated here
> >> many weeks ago.

> > Hermes supports multiple outpgoing SMTP servers, doesn't it?

> Yes in the full version, but Dave Plowman, has the cut-down version as
> supplied with his version of Messenger Pro, which seems to be a fairly old
> version.

Just bought the full latest version.

--
*Why isn't there a special name for the back of your knee?

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

In article <mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>,
Steve Fryatt <news@stevefryatt.org.uk> wrote:
> On 2 Nov, Doug Webb wrote in message
> <e7082d8559.dougjwebb@btinternet.com>:

> > It supports multiple clients but NOT multiple SMTP servers so sending
> > emails via a different SMTP server is not supported but you can send via
> > one SMTP server if your ISP allows that and which was communicated here
> > many weeks ago.

> Hermes supports multiple outpgoing SMTP servers, doesn't it?

Having just bought the full version of Messenger Pro, it doesn't include
Hermes in the package. Although it did come with the first Netfetch
package I bought a few weeks ago.

So I'm confused. Is it needed with Messenger Pro?

Both my email addresses (BT and 123-reg) are now set up using imap, and
working. Obviously be best if each used their own SMTP server.

--
*The longest recorded flightof a chicken is thirteen seconds *

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

In message <59858c28f4dave@davenoise.co.uk>
"Dave Plowman (News)" <dave@davenoise.co.uk> wrote:

> In article <mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>,
> Steve Fryatt <news@stevefryatt.org.uk> wrote:
>> On 2 Nov, Doug Webb wrote in message
>> <e7082d8559.dougjwebb@btinternet.com>:

>>> It supports multiple clients but NOT multiple SMTP servers so sending
>>> emails via a different SMTP server is not supported but you can send via
>>> one SMTP server if your ISP allows that and which was communicated here
>>> many weeks ago.

>> Hermes supports multiple outpgoing SMTP servers, doesn't it?

> Having just bought the full version of Messenger Pro, it doesn't include
> Hermes in the package. Although it did come with the first Netfetch
> package I bought a few weeks ago.

> So I'm confused. Is it needed with Messenger Pro?

> Both my email addresses (BT and 123-reg) are now set up using imap, and
> working. Obviously be best if each used their own SMTP server.

> --
> *The longest recorded flightof a chicken is thirteen seconds *

> Dave Plowman dave@davenoise.co.uk London SW
> To e-mail, change noise into sound.

I think this is possible.
I have just managed to set up POP gMail to do that.
Set up is a bit quirky!
Restart your machine. Load messenger>choices>site details>Hermes for
mail>Setup. You now see Hermes accounts >Outgoing servers. Double click on
your account. You can now set up a new outgoing SMPT account. Remember to
go to addresses. Add something out of your email address ie "btinternet".
Click "change". Close & remember to "Set" site settings.
You need to start with a re-set or you cannot see the "outgoing servers".
and for some reason the addressees you enter may not be remembered.
Well it's working here for now

Chris
--
chris.j.craig@btinternet.com
ARMX6 RISC OS 5.29
---

In message <875dae8559.Chris@btinternet.com>
Chris Craig <chris.j.craig@btinternet.com> wrote:

> In message <59858c28f4dave@davenoise.co.uk>
> "Dave Plowman (News)" <dave@davenoise.co.uk> wrote:

>> In article <mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>,
>> Steve Fryatt <news@stevefryatt.org.uk> wrote:
>>> On 2 Nov, Doug Webb wrote in message
>>> <e7082d8559.dougjwebb@btinternet.com>:

>>>> It supports multiple clients but NOT multiple SMTP servers so sending
>>>> emails via a different SMTP server is not supported but you can send via
>>>> one SMTP server if your ISP allows that and which was communicated here
>>>> many weeks ago.

>>> Hermes supports multiple outpgoing SMTP servers, doesn't it?

>> Having just bought the full version of Messenger Pro, it doesn't include
>> Hermes in the package. Although it did come with the first Netfetch
>> package I bought a few weeks ago.

>> So I'm confused. Is it needed with Messenger Pro?

>> Both my email addresses (BT and 123-reg) are now set up using imap, and
>> working. Obviously be best if each used their own SMTP server.

>> --
>> *The longest recorded flightof a chicken is thirteen seconds *

>> Dave Plowman dave@davenoise.co.uk London SW
>> To e-mail, change noise into sound.

> I think this is possible.
> I have just managed to set up POP gMail to do that.
> Set up is a bit quirky!
> Restart your machine. Load messenger>choices>site details>Hermes for
> mail>Setup. You now see Hermes accounts >Outgoing servers. Double click on
> your account. You can now set up a new outgoing SMPT account. Remember to
> go to addresses. Add something out of your email address ie "btinternet".
> Click "change". Close & remember to "Set" site settings.
> You need to start with a re-set or you cannot see the "outgoing servers".
> and for some reason the addressees you enter may not be remembered.
> Well it's working here for now

> Chris
> --
> chris.j.craig@btinternet.com
> ARMX6 RISC OS 5.29
> ---
PS For gmail you need to go to your account on a PC.
Select less secure connection. Set on 2factor authentication and obtain an
16 digit app password to use in your log in.

--
chris.j.craig@btinternet.com
ARMX6 RISC OS 5.29
---

In article <875dae8559.Chris@btinternet.com>,
Chris Craig <chris.j.craig@btinternet.com> wrote:
> In message <59858c28f4dave@davenoise.co.uk>
> "Dave Plowman (News)" <dave@davenoise.co.uk> wrote:

> > In article <mpro.r1yltw06atcr701p1.news@stevefryatt.org.uk>,
> > Steve Fryatt <news@stevefryatt.org.uk> wrote:
> >> On 2 Nov, Doug Webb wrote in message
> >> <e7082d8559.dougjwebb@btinternet.com>:

> >>> It supports multiple clients but NOT multiple SMTP servers so sending
> >>> emails via a different SMTP server is not supported but you can send via
> >>> one SMTP server if your ISP allows that and which was communicated here
> >>> many weeks ago.

> >> Hermes supports multiple outpgoing SMTP servers, doesn't it?

> > Having just bought the full version of Messenger Pro, it doesn't include
> > Hermes in the package. Although it did come with the first Netfetch
> > package I bought a few weeks ago.

> > So I'm confused. Is it needed with Messenger Pro?

> > Both my email addresses (BT and 123-reg) are now set up using imap, and
> > working. Obviously be best if each used their own SMTP server.

> > --
> > *The longest recorded flightof a chicken is thirteen seconds *

> > Dave Plowman dave@davenoise.co.uk London SW
> > To e-mail, change noise into sound.

> I think this is possible.
> I have just managed to set up POP gMail to do that.
> Set up is a bit quirky!
> Restart your machine. Load messenger>choices>site details>Hermes for
> mail>Setup. You now see Hermes accounts >Outgoing servers. Double click on
> your account. You can now set up a new outgoing SMPT account. Remember to
> go to addresses. Add something out of your email address ie "btinternet".
> Click "change". Close & remember to "Set" site settings.
> You need to start with a re-set or you cannot see the "outgoing servers".
> and for some reason the addressees you enter may not be remembered.
> Well it's working here for now

Think it may be different with Pro and imap. You use two user names (or
more) one for each account. And set the incoming and outgoing for each of
those accounts.

--
*I was married by a judge. I should have asked for a jury.

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.