Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  newsreader  groups  login

Message-ID:  

Computers are like air conditioners. Both stop working, if you open windows. -- Adam Heath


computers / alt.os.linux.suse / Re: Leap-15.4 Yast fails to deploy boot code

SubjectAuthor
* Leap-15.4 Yast fails to deploy boot codebad sector
`* Re: Leap-15.4 Yast fails to deploy boot codeCarlos E.R.
 `* Re: Leap-15.4 Yast fails to deploy boot codebad sector
  `* Re: Leap-15.4 Yast fails to deploy boot codeCarlos E.R.
   `* Re: Leap-15.4 Yast fails to deploy boot codebad sector
    `* Re: Leap-15.4 Yast fails to deploy boot codeCarlos E.R.
     `* Re: Leap-15.4 Yast fails to deploy boot codebad sector
      `* Re: Leap-15.4 Yast fails to deploy boot codeCarlos E.R.
       `* Re: Leap-15.4 Yast fails to deploy boot codebad sector
        `* Re: Leap-15.4 Yast fails to deploy boot codeCarlos E.R.
         `* Re: Leap-15.4 Yast fails to deploy boot codebad sector
          `* Re: Leap-15.4 Yast fails to deploy boot codeCarlos E.R.
           `- Re: Leap-15.4 Yast fails to deploy boot codebad sector

1
Leap-15.4 Yast fails to deploy boot code

<13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=918&group=alt.os.linux.suse#918

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Thu, 01 Jun 2023 16:57:52 +0000
Date: Thu, 1 Jun 2023 12:57:52 -0400
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.11.0
From: forget...@INVALID.net (bad sector)
Subject: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
Content-Language: hu
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
Lines: 47
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-KvkP4T9PifuHEa9oabrl2CQKGJ04lifQ34yK4pKlFIIoNtkkE4lyrSVGUhjehklgFNZPOG8JqXCw44U!LCAj7SR62RkiMlhIeijssC2XDJrUeyBC9bwTzFj+H+AU7bcUVhtH64RRtGPibGArWmTdO3jWvVVS!bA==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: bad sector - Thu, 1 Jun 2023 16:57 UTC

Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
"/boot/grub2/grub.cfg"]]" failed.
Exit code: 139
Error output: Generating grub configuration file ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "en_US.UTF-8",
LC_TIME = "Default.UTF-8",
LANG = "C"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Found linux image: /boot/vmlinuz-5.14.21-150400.24.63-default
Found initrd image: /boot/initrd-5.14.21-150400.24.63-default
Found linux image: /boot/vmlinuz-5.14.21-150400.22-default
Found initrd image: /boot/initrd-5.14.21-150400.22-default
Found memtest image: /boot/memtest.bin
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create
new boot entries.
Found Artix Linux (rolling) on /dev/sda1
Found Devuan GNU/Linux 4 (chimaera) on /dev/sda2
Found Slackware 15.0 x86_64 on /dev/sda3
Found openSUSE Tumbleweed on /dev/sda5
Found Ubuntu 22.04.2 LTS (22.04) on /dev/sda6
Found MX 21.3 Wildflower (21.3) on /dev/sda7
Found openSUSE Leap 15.5 Beta on /dev/sda8

I have 'locale' citations from time to time in various failed tasks but
this is the first time that booting is involved. First of all WTF does
locale have to do with booting AT ALL? I normally set such prefs during
install, for example North-America, keyboard US-english, Pangnirtung
Canada, Zulu -5h time (Eastern with daylight saving). Then, how does
"unset" get to be "supported" on a system? While on the topic, why does
Yast check for software repos and for 'trust' for a boot setup? Useless
foreign fluff should not be allowed at all within 50 miles of anything
having to do with booting. KISS!

Re: Leap-15.4 Yast fails to deploy boot code

<mcenkjxcko.ln2@Telcontar.valinor>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=919&group=alt.os.linux.suse#919

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!usenet.goja.nl.eu.org!3.eu.feeder.erje.net!feeder.erje.net!news2.arglkargh.de!news.karotte.org!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: robin_li...@es.invalid (Carlos E.R.)
Newsgroups: alt.os.linux.suse
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Date: Thu, 1 Jun 2023 23:15:34 +0200
Lines: 58
Message-ID: <mcenkjxcko.ln2@Telcontar.valinor>
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
X-Trace: individual.net +mBkWjR5dcZA5DNWP07t8gP3x+9h/+LPPl9WJ73aUIm5VWjNKO
X-Orig-Path: Telcontar.valinor!not-for-mail
Cancel-Lock: sha1:/akYKIUSlBx7ov6PKG2U9qLBm60=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.9.1
Content-Language: es-ES, en-CA
In-Reply-To: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
 by: Carlos E.R. - Thu, 1 Jun 2023 21:15 UTC

On 2023-06-01 18:57, bad sector wrote:
>
>
> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
> "/boot/grub2/grub.cfg"]]" failed.
> Exit code: 139
> Error output: Generating grub configuration file ...
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = (unset),
> LC_ALL = (unset),
> LC_CTYPE = "en_US.UTF-8",
> LC_TIME = "Default.UTF-8",
> LANG = "C"
> are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").

So, this is not the error that blocked your boot generation.

> Found linux image: /boot/vmlinuz-5.14.21-150400.24.63-default
> Found initrd image: /boot/initrd-5.14.21-150400.24.63-default
> Found linux image: /boot/vmlinuz-5.14.21-150400.22-default
> Found initrd image: /boot/initrd-5.14.21-150400.22-default
> Found memtest image: /boot/memtest.bin
> Warning: os-prober will be executed to detect other bootable partitions.
> Its output will be used to detect bootable binaries on them and create
> new boot entries.
> Found Artix Linux (rolling) on /dev/sda1
> Found Devuan GNU/Linux 4 (chimaera) on /dev/sda2
> Found Slackware 15.0 x86_64 on /dev/sda3
> Found openSUSE Tumbleweed on /dev/sda5
> Found Ubuntu 22.04.2 LTS (22.04) on /dev/sda6
> Found MX 21.3 Wildflower (21.3) on /dev/sda7
> Found openSUSE Leap 15.5 Beta on /dev/sda8
>
>
> I have 'locale' citations from time to time in various failed tasks but
> this is the first time that booting is involved. First of all WTF does
> locale have to do with booting AT ALL?

Because initrd is not only the kernel modules, it contains a minimal but
complete Linux system held in memory, with many files, used to
initialize the system (after booting itself).

> I normally set such prefs during
> install, for example North-America, keyboard US-english, Pangnirtung
> Canada, Zulu -5h time (Eastern with daylight saving). Then, how does
> "unset" get to be "supported" on a system? While on the topic, why does
> Yast check for software repos and for 'trust' for a boot setup? Useless
> foreign fluff should not be allowed at all within 50 miles of anything
> having to do with booting. KISS!

You would have to ask the developers.

--
Cheers, Carlos.

Re: Leap-15.4 Yast fails to deploy boot code

<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=921&group=alt.os.linux.suse#921

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Thu, 01 Jun 2023 23:50:42 +0000
Date: Thu, 1 Jun 2023 19:50:42 -0400
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.11.0
From: forget...@INVALID.net (bad sector)
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
Content-Language: hu
In-Reply-To: <mcenkjxcko.ln2@Telcontar.valinor>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID: <pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
Lines: 64
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-U4JFVBc/7Zai3Rrex6wDfN9jNB63H5umqysyW8kcTVjHO1KdJB3wBgJefO42Ip3wi1YuzmuTAHHDEDF!WsnVUyvDM04lZa8Y+HEZRI2uLGL0GxDNAgDp9tHJdrxtKBvzXxVWVmTORJOvEhcxJ1N2RFeZrIgQ!Ew==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: bad sector - Thu, 1 Jun 2023 23:50 UTC

On 6/1/23 17:15, Carlos E.R. wrote:
> On 2023-06-01 18:57, bad sector wrote:
>>
>>
>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>> "/boot/grub2/grub.cfg"]]" failed.
>> Exit code: 139
>> Error output: Generating grub configuration file ...
>> perl: warning: Setting locale failed.
>> perl: warning: Please check that your locale settings:
>> LANGUAGE = (unset),
>> LC_ALL = (unset),
>> LC_CTYPE = "en_US.UTF-8",
>> LC_TIME = "Default.UTF-8",
>> LANG = "C"
>> are supported and installed on your system.
>> perl: warning: Falling back to the standard locale ("C").
>
> So, this is not the error that blocked your boot generation.

It's the error message I got

BTW the boot setup DID complete, I know that because the reason I had
tried it with Leap-15.4 is that TW (the previous one tried) put only TW
in the boot menu but after this run I had all the syustems in the menu.

>> Found linux image: /boot/vmlinuz-5.14.21-150400.24.63-default
>> Found initrd image: /boot/initrd-5.14.21-150400.24.63-default
>> Found linux image: /boot/vmlinuz-5.14.21-150400.22-default
>> Found initrd image: /boot/initrd-5.14.21-150400.22-default
>> Found memtest image: /boot/memtest.bin
>> Warning: os-prober will be executed to detect other bootable partitions.
>> Its output will be used to detect bootable binaries on them and create
>> new boot entries.
>> Found Artix Linux (rolling) on /dev/sda1
>> Found Devuan GNU/Linux 4 (chimaera) on /dev/sda2
>> Found Slackware 15.0 x86_64 on /dev/sda3
>> Found openSUSE Tumbleweed on /dev/sda5
>> Found Ubuntu 22.04.2 LTS (22.04) on /dev/sda6
>> Found MX 21.3 Wildflower (21.3) on /dev/sda7
>> Found openSUSE Leap 15.5 Beta on /dev/sda8
>>
>>
>> I have 'locale' citations from time to time in various failed tasks
>> but this is the first time that booting is involved. First of all WTF
>> does locale have to do with booting AT ALL?
>
> Because initrd is not only the kernel modules, it contains a minimal but
> complete Linux system held in memory, with many files, used to
> initialize the system (after booting itself).
>
>
>> I normally set such prefs during install, for example North-America,
>> keyboard US-english, Pangnirtung Canada, Zulu -5h time (Eastern with
>> daylight saving). Then, how does "unset" get to be "supported" on a
>> system? While on the topic, why does Yast check for software repos and
>> for 'trust' for a boot setup? Useless foreign fluff should not be
>> allowed at all within 50 miles of anything having to do with booting.
>> KISS!
>
> You would have to ask the developers.
>

Re: Leap-15.4 Yast fails to deploy boot code

<lnrokjxa7l.ln2@Telcontar.valinor>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=922&group=alt.os.linux.suse#922

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!news.samoylyk.net!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: robin_li...@es.invalid (Carlos E.R.)
Newsgroups: alt.os.linux.suse
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Date: Fri, 2 Jun 2023 12:09:25 +0200
Lines: 37
Message-ID: <lnrokjxa7l.ln2@Telcontar.valinor>
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
X-Trace: individual.net A0gT7xrE+jH5XjDdOvcpdQnqMGDGx54RANUE2zxa5bhgqqDz8s
X-Orig-Path: Telcontar.valinor!not-for-mail
Cancel-Lock: sha1:ycItTwKWfSMNS7OAQiSpipK+m/8=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.9.1
Content-Language: es-ES, en-CA
In-Reply-To: <pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
 by: Carlos E.R. - Fri, 2 Jun 2023 10:09 UTC

On 2023-06-02 01:50, bad sector wrote:
> On 6/1/23 17:15, Carlos E.R. wrote:
>> On 2023-06-01 18:57, bad sector wrote:
>>>
>>>
>>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>>> "/boot/grub2/grub.cfg"]]" failed.
>>> Exit code: 139
>>> Error output: Generating grub configuration file ...
>>> perl: warning: Setting locale failed.
>>> perl: warning: Please check that your locale settings:
>>> LANGUAGE = (unset),
>>> LC_ALL = (unset),
>>> LC_CTYPE = "en_US.UTF-8",
>>> LC_TIME = "Default.UTF-8",
>>> LANG = "C"
>>> are supported and installed on your system.
>>> perl: warning: Falling back to the standard locale ("C").
>>
>> So, this is not the error that blocked your boot generation.
>
> It's the error message I got
>
> BTW the boot setup DID complete, I know that because the reason I had
> tried it with Leap-15.4 is that TW (the previous one tried) put only TW
> in the boot menu but after this run I had all the syustems in the menu.

You can tell YaST to put only boot for the running system and ignore the
rest.

Or, you could set up a locale.

--
Cheers, Carlos.

Re: Leap-15.4 Yast fails to deploy boot code

<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=923&group=alt.os.linux.suse#923

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!border-1.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-2.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Fri, 02 Jun 2023 20:48:10 +0000
Date: Fri, 2 Jun 2023 16:48:10 -0400
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.11.0
From: forget...@INVALID.net (bad sector)
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
Content-Language: hu
In-Reply-To: <lnrokjxa7l.ln2@Telcontar.valinor>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Message-ID: <R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
Lines: 48
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-keBKRpncdUftU0E72GiIWyXb4PLUe56vkLzsPsZ8yfEUprHANceyk2oWi0/bzApTtw00vNcmYlr1Ndu!j1feR5ql82Jz9lXYeJqodIu6Ek+JWwPLrnUBAIznWXZyS7szGo1e7ElJO6TVUpBOC2fGVFYHYkmf!Jw==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: bad sector - Fri, 2 Jun 2023 20:48 UTC

On 6/2/23 06:09, Carlos E.R. wrote:
> On 2023-06-02 01:50, bad sector wrote:
>> On 6/1/23 17:15, Carlos E.R. wrote:
>>> On 2023-06-01 18:57, bad sector wrote:
>>>>
>>>>
>>>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>>>> "/boot/grub2/grub.cfg"]]" failed.
>>>> Exit code: 139
>>>> Error output: Generating grub configuration file ...
>>>> perl: warning: Setting locale failed.
>>>> perl: warning: Please check that your locale settings:
>>>> LANGUAGE = (unset),
>>>> LC_ALL = (unset),
>>>> LC_CTYPE = "en_US.UTF-8",
>>>> LC_TIME = "Default.UTF-8",
>>>> LANG = "C"
>>>> are supported and installed on your system.
>>>> perl: warning: Falling back to the standard locale ("C").
>>>
>>> So, this is not the error that blocked your boot generation.
>>
>> It's the error message I got
>>
>> BTW the boot setup DID complete, I know that because the reason I had
>> tried it with Leap-15.4 is that TW (the previous one tried) put only
>> TW in the boot menu but after this run I had all the syustems in the
>> menu.
>
> You can tell YaST to put only boot for the running system and ignore the
> rest.

Leap does some of what I want done, it's TW that doesn't because it
excludes other systems even though Probe-Other-OS'es' is checked. What
Leap does NOT seem to be doing is terminating the task with a proper
completion message but pops an error message instead.

> Or, you could set up a locale.

Why? I had made all preferences choices at the time of installation,
isn't that sufficient?

BTW i just installed gcc-locale and the repeated grub run completed with
no error messages. No idea how come.

Re: Leap-15.4 Yast fails to deploy boot code

<amhrkjxsrf.ln2@Telcontar.valinor>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=924&group=alt.os.linux.suse#924

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!news.samoylyk.net!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: robin_li...@es.invalid (Carlos E.R.)
Newsgroups: alt.os.linux.suse
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Date: Sat, 3 Jun 2023 12:36:26 +0200
Lines: 57
Message-ID: <amhrkjxsrf.ln2@Telcontar.valinor>
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
X-Trace: individual.net Gypqy7loQ5rboILHR1a3qglgnBSVKu8gh205qJ4Rp4GdwrnQ4t
X-Orig-Path: Telcontar.valinor!not-for-mail
Cancel-Lock: sha1:pYJ7ZrJRCtcPwdPZD91MCI82C5I=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.9.1
Content-Language: es-ES, en-CA
In-Reply-To: <R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
 by: Carlos E.R. - Sat, 3 Jun 2023 10:36 UTC

On 2023-06-02 22:48, bad sector wrote:
> On 6/2/23 06:09, Carlos E.R. wrote:
>> On 2023-06-02 01:50, bad sector wrote:
>>> On 6/1/23 17:15, Carlos E.R. wrote:
>>>> On 2023-06-01 18:57, bad sector wrote:
>>>>>
>>>>>
>>>>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>>>>> "/boot/grub2/grub.cfg"]]" failed.
>>>>> Exit code: 139
>>>>> Error output: Generating grub configuration file ...
>>>>> perl: warning: Setting locale failed.
>>>>> perl: warning: Please check that your locale settings:
>>>>> LANGUAGE = (unset),
>>>>> LC_ALL = (unset),
>>>>> LC_CTYPE = "en_US.UTF-8",
>>>>> LC_TIME = "Default.UTF-8",
>>>>> LANG = "C"
>>>>> are supported and installed on your system.
>>>>> perl: warning: Falling back to the standard locale ("C").
>>>>
>>>> So, this is not the error that blocked your boot generation.
>>>
>>> It's the error message I got
>>>
>>> BTW the boot setup DID complete, I know that because the reason I had
>>> tried it with Leap-15.4 is that TW (the previous one tried) put only
>>> TW in the boot menu but after this run I had all the syustems in the
>>> menu.
>>
>> You can tell YaST to put only boot for the running system and ignore
>> the rest.
>
> Leap does some of what I want done, it's TW that doesn't because it
> excludes other systems even though Probe-Other-OS'es' is checked. What
> Leap does NOT seem to be doing is terminating the task with a proper
> completion message but pops an error message instead.
>
>
>> Or, you could set up a locale.
>
> Why?  I had made all preferences choices at the time of installation,
> isn't that sufficient?

Apparently Mr root doesn't have a locale.

> BTW i just installed gcc-locale and the repeated grub run completed with
> no error messages. No idea how come.

Ah, then the problem was the missing package.

Did you install with "no recommends", perhaps?

--
Cheers, Carlos.

Re: Leap-15.4 Yast fails to deploy boot code

<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=925&group=alt.os.linux.suse#925

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Sat, 03 Jun 2023 22:37:47 +0000
Date: Sat, 3 Jun 2023 18:37:47 -0400
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.11.0
From: forget...@INVALID.net (bad sector)
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
Content-Language: hu, en-US, fr
In-Reply-To: <amhrkjxsrf.ln2@Telcontar.valinor>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Message-ID: <rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
Lines: 63
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-499Hoi3NIE7dtf7DSipDCjGbAVAVFDBpoK5/dktdS57IG0rZIiHr4BKlogYQ5b3HdpwqCjxV9mvp2Fx!+Mk9uYR8P7pVa9uAG7DcqVnW5y7qx7w0L5h1r5DArWXJ57liLaXur7Fv+X95s17wV7UQ5APfk3Vz!qA==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: bad sector - Sat, 3 Jun 2023 22:37 UTC

On 6/3/23 06:36, Carlos E.R. wrote:
> On 2023-06-02 22:48, bad sector wrote:
>> On 6/2/23 06:09, Carlos E.R. wrote:
>>> On 2023-06-02 01:50, bad sector wrote:
>>>> On 6/1/23 17:15, Carlos E.R. wrote:
>>>>> On 2023-06-01 18:57, bad sector wrote:
>>>>>>
>>>>>>
>>>>>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>>>>>> "/boot/grub2/grub.cfg"]]" failed.
>>>>>> Exit code: 139
>>>>>> Error output: Generating grub configuration file ...
>>>>>> perl: warning: Setting locale failed.
>>>>>> perl: warning: Please check that your locale settings:
>>>>>> LANGUAGE = (unset),
>>>>>> LC_ALL = (unset),
>>>>>> LC_CTYPE = "en_US.UTF-8",
>>>>>> LC_TIME = "Default.UTF-8",
>>>>>> LANG = "C"
>>>>>> are supported and installed on your system.
>>>>>> perl: warning: Falling back to the standard locale ("C").
>>>>>
>>>>> So, this is not the error that blocked your boot generation.
>>>>
>>>> It's the error message I got
>>>>
>>>> BTW the boot setup DID complete, I know that because the reason I
>>>> had tried it with Leap-15.4 is that TW (the previous one tried) put
>>>> only TW in the boot menu but after this run I had all the syustems
>>>> in the menu.
>>>
>>> You can tell YaST to put only boot for the running system and ignore
>>> the rest.
>>
>> Leap does some of what I want done, it's TW that doesn't because it
>> excludes other systems even though Probe-Other-OS'es' is checked. What
>> Leap does NOT seem to be doing is terminating the task with a proper
>> completion message but pops an error message instead.
>>
>>
>>> Or, you could set up a locale.
>>
>> Why?  I had made all preferences choices at the time of installation,
>> isn't that sufficient?
>
> Apparently Mr root doesn't have a locale.

but of course (re) installing gcc-locale would give mr. root a locale?

>> BTW i just installed gcc-locale and the repeated grub run completed
>> with no error messages. No idea how come.
>
> Ah, then the problem was the missing package.
>
> Did you install with "no recommends", perhaps?

Never do that, but since about the first Leap-15 I have been upgrading
instead of freshies (due to the obviously unacceptaple setup and tweak
load). I didn't uninstall gcc-locale either so what uninstalled it or
how come there was no problem with grub runs before?

Re: Leap-15.4 Yast fails to deploy boot code

<879tkjxg6t.ln2@Telcontar.valinor>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=926&group=alt.os.linux.suse#926

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!usenet.goja.nl.eu.org!3.eu.feeder.erje.net!feeder.erje.net!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: robin_li...@es.invalid (Carlos E.R.)
Newsgroups: alt.os.linux.suse
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Date: Sun, 4 Jun 2023 04:24:08 +0200
Lines: 90
Message-ID: <879tkjxg6t.ln2@Telcontar.valinor>
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
X-Trace: individual.net joYlh9H34TepgK/NpLtqxQxu66tk+c1YHHjUyP0zy0b3XhF8V+
X-Orig-Path: Telcontar.valinor!not-for-mail
Cancel-Lock: sha1:SR+tzkUWlKKfiRwJjVUAQBj4p5g=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.9.1
Content-Language: es-ES, en-CA
In-Reply-To: <rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
 by: Carlos E.R. - Sun, 4 Jun 2023 02:24 UTC

On 2023-06-04 00:37, bad sector wrote:
> On 6/3/23 06:36, Carlos E.R. wrote:
>> On 2023-06-02 22:48, bad sector wrote:
>>> On 6/2/23 06:09, Carlos E.R. wrote:
>>>> On 2023-06-02 01:50, bad sector wrote:
>>>>> On 6/1/23 17:15, Carlos E.R. wrote:
>>>>>> On 2023-06-01 18:57, bad sector wrote:
>>>>>>>
>>>>>>>
>>>>>>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>>>>>>> "/boot/grub2/grub.cfg"]]" failed.
>>>>>>> Exit code: 139
>>>>>>> Error output: Generating grub configuration file ...
>>>>>>> perl: warning: Setting locale failed.
>>>>>>> perl: warning: Please check that your locale settings:
>>>>>>> LANGUAGE = (unset),
>>>>>>> LC_ALL = (unset),
>>>>>>> LC_CTYPE = "en_US.UTF-8",
>>>>>>> LC_TIME = "Default.UTF-8",
>>>>>>> LANG = "C"
>>>>>>> are supported and installed on your system.
>>>>>>> perl: warning: Falling back to the standard locale ("C").
>>>>>>
>>>>>> So, this is not the error that blocked your boot generation.
>>>>>
>>>>> It's the error message I got
>>>>>
>>>>> BTW the boot setup DID complete, I know that because the reason I
>>>>> had tried it with Leap-15.4 is that TW (the previous one tried) put
>>>>> only TW in the boot menu but after this run I had all the syustems
>>>>> in the menu.
>>>>
>>>> You can tell YaST to put only boot for the running system and ignore
>>>> the rest.
>>>
>>> Leap does some of what I want done, it's TW that doesn't because it
>>> excludes other systems even though Probe-Other-OS'es' is checked.
>>> What Leap does NOT seem to be doing is terminating the task with a
>>> proper completion message but pops an error message instead.
>>>
>>>
>>>> Or, you could set up a locale.
>>>
>>> Why?  I had made all preferences choices at the time of installation,
>>> isn't that sufficient?
>>
>> Apparently Mr root doesn't have a locale.
>
> but of course (re) installing gcc-locale would give mr. root a locale?

Maybe.

Telcontar:~ # locale
LANG=POSIX
LC_CTYPE=en_US.UTF-8
LC_NUMERIC="POSIX"
LC_TIME="POSIX"
LC_COLLATE="POSIX"
LC_MONETARY="POSIX"
LC_MESSAGES="POSIX"
LC_PAPER="POSIX"
LC_NAME="POSIX"
LC_ADDRESS="POSIX"
LC_TELEPHONE="POSIX"
LC_MEASUREMENT="POSIX"
LC_IDENTIFICATION="POSIX"
LC_ALL=
Telcontar:~ #

>>> BTW i just installed gcc-locale and the repeated grub run completed
>>> with no error messages. No idea how come.
>>
>> Ah, then the problem was the missing package.
>>
>> Did you install with "no recommends", perhaps?
>
> Never do that, but since about the first Leap-15 I have been upgrading
> instead of freshies (due to the obviously unacceptaple setup and tweak
> load). I didn't uninstall gcc-locale either so what uninstalled it or
> how come there was no problem with grub runs before?
>
>

--
Cheers, Carlos.

Re: Leap-15.4 Yast fails to deploy boot code

<uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=927&group=alt.os.linux.suse#927

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Sun, 04 Jun 2023 03:16:35 +0000
Date: Sat, 3 Jun 2023 23:16:34 -0400
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.11.2
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
<879tkjxg6t.ln2@Telcontar.valinor>
Content-Language: en-US
From: forget...@_INVALID.net (bad sector)
In-Reply-To: <879tkjxg6t.ln2@Telcontar.valinor>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Message-ID: <uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>
Lines: 108
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-PNf1gt7iugg/oYzQJLYRbofEFDkCTioFOKZ6Prn6vmM7pUoe2faQVNN7emeU1fHzhUBLGCUXhaGHa4G!145v/bZc9/z0FLrE36vwKjDoA6WnCbSyafVn55uhRwcJMOQT1tlNNtunjttjrnlpbDPutf5/cjjj!UQ==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: bad sector - Sun, 4 Jun 2023 03:16 UTC

On 6/3/23 22:24, Carlos E.R. wrote:
> On 2023-06-04 00:37, bad sector wrote:
>> On 6/3/23 06:36, Carlos E.R. wrote:
>>> On 2023-06-02 22:48, bad sector wrote:
>>>> On 6/2/23 06:09, Carlos E.R. wrote:
>>>>> On 2023-06-02 01:50, bad sector wrote:
>>>>>> On 6/1/23 17:15, Carlos E.R. wrote:
>>>>>>> On 2023-06-01 18:57, bad sector wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> Execution of command "[["/usr/sbin/grub2-mkconfig", "-o",
>>>>>>>> "/boot/grub2/grub.cfg"]]" failed.
>>>>>>>> Exit code: 139
>>>>>>>> Error output: Generating grub configuration file ...
>>>>>>>> perl: warning: Setting locale failed.
>>>>>>>> perl: warning: Please check that your locale settings:
>>>>>>>> LANGUAGE = (unset),
>>>>>>>> LC_ALL = (unset),
>>>>>>>> LC_CTYPE = "en_US.UTF-8",
>>>>>>>> LC_TIME = "Default.UTF-8",
>>>>>>>> LANG = "C"
>>>>>>>> are supported and installed on your system.
>>>>>>>> perl: warning: Falling back to the standard locale ("C").
>>>>>>>
>>>>>>> So, this is not the error that blocked your boot generation.
>>>>>>
>>>>>> It's the error message I got
>>>>>>
>>>>>> BTW the boot setup DID complete, I know that because the reason I
>>>>>> had tried it with Leap-15.4 is that TW (the previous one tried)
>>>>>> put only TW in the boot menu but after this run I had all the
>>>>>> syustems in the menu.
>>>>>
>>>>> You can tell YaST to put only boot for the running system and
>>>>> ignore the rest.
>>>>
>>>> Leap does some of what I want done, it's TW that doesn't because it
>>>> excludes other systems even though Probe-Other-OS'es' is checked.
>>>> What Leap does NOT seem to be doing is terminating the task with a
>>>> proper completion message but pops an error message instead.
>>>>
>>>>
>>>>> Or, you could set up a locale.
>>>>
>>>> Why?  I had made all preferences choices at the time of
>>>> installation, isn't that sufficient?
>>>
>>> Apparently Mr root doesn't have a locale.
>>
>> but of course (re) installing gcc-locale would give mr. root a locale?
>
> Maybe.
>
>
> Telcontar:~ # locale
> LANG=POSIX
> LC_CTYPE=en_US.UTF-8
> LC_NUMERIC="POSIX"
> LC_TIME="POSIX"
> LC_COLLATE="POSIX"
> LC_MONETARY="POSIX"
> LC_MESSAGES="POSIX"
> LC_PAPER="POSIX"
> LC_NAME="POSIX"
> LC_ADDRESS="POSIX"
> LC_TELEPHONE="POSIX"
> LC_MEASUREMENT="POSIX"
> LC_IDENTIFICATION="POSIX"
> LC_ALL=

# locale
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME=Default.UTF-8
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
# su
Password:
# locale
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME=Default.UTF-8
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=

Re: Leap-15.4 Yast fails to deploy boot code

<tc2ukjxbh.ln2@Telcontar.valinor>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=928&group=alt.os.linux.suse#928

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!usenet.goja.nl.eu.org!3.eu.feeder.erje.net!feeder.erje.net!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: robin_li...@es.invalid (Carlos E.R.)
Newsgroups: alt.os.linux.suse
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Date: Sun, 4 Jun 2023 11:33:49 +0200
Lines: 58
Message-ID: <tc2ukjxbh.ln2@Telcontar.valinor>
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
<879tkjxg6t.ln2@Telcontar.valinor>
<uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
X-Trace: individual.net E2NOhCwP/qqxwrnhvy8lcwAfmcpBGA4xG9JWyGI0nA23o3RX68
X-Orig-Path: Telcontar.valinor!not-for-mail
Cancel-Lock: sha1:+WmjPG9WNKjqUHZkIJuV7L90o/w=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.9.1
Content-Language: es-ES, en-CA
In-Reply-To: <uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>
 by: Carlos E.R. - Sun, 4 Jun 2023 09:33 UTC

On 2023-06-04 05:16, bad sector wrote:
> On 6/3/23 22:24, Carlos E.R. wrote:
>> On 2023-06-04 00:37, bad sector wrote:

>>>>>> Or, you could set up a locale.
>>>>>
>>>>> Why?  I had made all preferences choices at the time of
>>>>> installation, isn't that sufficient?
>>>>
>>>> Apparently Mr root doesn't have a locale.
>>>
>>> but of course (re) installing gcc-locale would give mr. root a locale?
>>
>> Maybe.
>>
>>
>> Telcontar:~ # locale
>> LANG=POSIX
>> LC_CTYPE=en_US.UTF-8
>> LC_NUMERIC="POSIX"
>> LC_TIME="POSIX"
>> LC_COLLATE="POSIX"
>> LC_MONETARY="POSIX"
>> LC_MESSAGES="POSIX"
>> LC_PAPER="POSIX"
>> LC_NAME="POSIX"
>> LC_ADDRESS="POSIX"
>> LC_TELEPHONE="POSIX"
>> LC_MEASUREMENT="POSIX"
>> LC_IDENTIFICATION="POSIX"
>> LC_ALL=
>
> # locale
> locale: Cannot set LC_ALL to default locale: No such file or directory
> LANG=en_US.UTF-8

Does /usr/lib/locale/en_US.UTF-8 exist?

It should probably be "en_US.utf8"

> LC_CTYPE="en_US.UTF-8"
> LC_NUMERIC="en_US.UTF-8"
> LC_TIME=Default.UTF-8
> LC_COLLATE="en_US.UTF-8"
> LC_MONETARY="en_US.UTF-8"
> LC_MESSAGES="en_US.UTF-8"
> LC_PAPER="en_US.UTF-8"
> LC_NAME="en_US.UTF-8"
> LC_ADDRESS="en_US.UTF-8"
> LC_TELEPHONE="en_US.UTF-8"
> LC_MEASUREMENT="en_US.UTF-8"
> LC_IDENTIFICATION="en_US.UTF-8"
> LC_ALL=

--
Cheers, Carlos.

Re: Leap-15.4 Yast fails to deploy boot code

<xsudnbbTVriW9uH5nZ2dnZfqnPGdnZ2d@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=929&group=alt.os.linux.suse#929

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!diablo1.usenet.blueworldhosting.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!border-1.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-2.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Sun, 04 Jun 2023 10:44:27 +0000
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
<879tkjxg6t.ln2@Telcontar.valinor>
<uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>
<tc2ukjxbh.ln2@Telcontar.valinor>
From: forget...@invalid.net (bad sector)
Date: Sun, 4 Jun 2023 06:44:26 -0400
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
Thunderbird/78.13.0
MIME-Version: 1.0
In-Reply-To: <tc2ukjxbh.ln2@Telcontar.valinor>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 8bit
Message-ID: <xsudnbbTVriW9uH5nZ2dnZfqnPGdnZ2d@giganews.com>
Lines: 73
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-nZzLjW/BSFGheV5f0XjnhV97K7x1cXeV2wUkJXuXElnSolHZYhaqxfvStv6TYQLs3PwC1N6Yng7Y2YL!dfPKEHSZGLI4Y9Gizf49hWhEO3ua1eG5qOovbO4JuSSVR8WqeuLta+UtAnuirfXf+k70pzOdODiV!hQ==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
X-Received-Bytes: 3488
 by: bad sector - Sun, 4 Jun 2023 10:44 UTC

On 6/4/23 5:33 AM, Carlos E.R. wrote:
> On 2023-06-04 05:16, bad sector wrote:
>> On 6/3/23 22:24, Carlos E.R. wrote:
>>> On 2023-06-04 00:37, bad sector wrote:
>
>
>>>>>>> Or, you could set up a locale.
>>>>>>
>>>>>> Why?  I had made all preferences choices at the time of
>>>>>> installation, isn't that sufficient?
>>>>>
>>>>> Apparently Mr root doesn't have a locale.
>>>>
>>>> but of course (re) installing gcc-locale would give mr. root a locale?
>>>
>>> Maybe.
>>>
>>>
>>> Telcontar:~ # locale
>>> LANG=POSIX
>>> LC_CTYPE=en_US.UTF-8
>>> LC_NUMERIC="POSIX"
>>> LC_TIME="POSIX"
>>> LC_COLLATE="POSIX"
>>> LC_MONETARY="POSIX"
>>> LC_MESSAGES="POSIX"
>>> LC_PAPER="POSIX"
>>> LC_NAME="POSIX"
>>> LC_ADDRESS="POSIX"
>>> LC_TELEPHONE="POSIX"
>>> LC_MEASUREMENT="POSIX"
>>> LC_IDENTIFICATION="POSIX"
>>> LC_ALL=
>>
>> # locale
>> locale: Cannot set LC_ALL to default locale: No such file or directory
>> LANG=en_US.UTF-8
>
> Does /usr/lib/locale/en_US.UTF-8 exist?
>
> It should probably be "en_US.utf8"

it is

/usr/lib/locale/en_US.utf8

I also have what appears to be a balooning number of issues with
Leap-15.4 so with only days to go 15.5 I think I will just do an
upgrade, worst case scenario a freshie.

T-Bird stopped sending yesterday, messages vanish
Previously installed Pan2 nowhere to be found
Yast Software Managment fails to launch
...and on and on

>> LC_CTYPE="en_US.UTF-8"
>> LC_NUMERIC="en_US.UTF-8"
>> LC_TIME=Default.UTF-8
>> LC_COLLATE="en_US.UTF-8"
>> LC_MONETARY="en_US.UTF-8"
>> LC_MESSAGES="en_US.UTF-8"
>> LC_PAPER="en_US.UTF-8"
>> LC_NAME="en_US.UTF-8"
>> LC_ADDRESS="en_US.UTF-8"
>> LC_TELEPHONE="en_US.UTF-8"
>> LC_MEASUREMENT="en_US.UTF-8"
>> LC_IDENTIFICATION="en_US.UTF-8"
>> LC_ALL=
>

Re: Leap-15.4 Yast fails to deploy boot code

<df0vkjx8in.ln2@Telcontar.valinor>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=930&group=alt.os.linux.suse#930

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!usenet.goja.nl.eu.org!3.eu.feeder.erje.net!feeder.erje.net!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: robin_li...@es.invalid (Carlos E.R.)
Newsgroups: alt.os.linux.suse
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Date: Sun, 4 Jun 2023 20:07:09 +0200
Lines: 63
Message-ID: <df0vkjx8in.ln2@Telcontar.valinor>
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
<879tkjxg6t.ln2@Telcontar.valinor>
<uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>
<tc2ukjxbh.ln2@Telcontar.valinor>
<xsudnbbTVriW9uH5nZ2dnZfqnPGdnZ2d@giganews.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
X-Trace: individual.net le9VlD2G8GuFTzPwwzQHyA7hxXZ33C1hzuQFC3YsHeQ3Shc3yI
X-Orig-Path: Telcontar.valinor!not-for-mail
Cancel-Lock: sha1:y/Bg0eC7i+sWOzlZkB9B1m1Z2JQ=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.9.1
Content-Language: es-ES, en-CA
In-Reply-To: <xsudnbbTVriW9uH5nZ2dnZfqnPGdnZ2d@giganews.com>
 by: Carlos E.R. - Sun, 4 Jun 2023 18:07 UTC

On 2023-06-04 12:44, bad sector wrote:
> On 6/4/23 5:33 AM, Carlos E.R. wrote:
>> On 2023-06-04 05:16, bad sector wrote:
>>> On 6/3/23 22:24, Carlos E.R. wrote:
>>>> On 2023-06-04 00:37, bad sector wrote:
>>
>>
>>>>>>>> Or, you could set up a locale.
>>>>>>>
>>>>>>> Why?  I had made all preferences choices at the time of
>>>>>>> installation, isn't that sufficient?
>>>>>>
>>>>>> Apparently Mr root doesn't have a locale.
>>>>>
>>>>> but of course (re) installing gcc-locale would give mr. root a locale?
>>>>
>>>> Maybe.
>>>>
>>>>
>>>> Telcontar:~ # locale
>>>> LANG=POSIX
>>>> LC_CTYPE=en_US.UTF-8
>>>> LC_NUMERIC="POSIX"
>>>> LC_TIME="POSIX"
>>>> LC_COLLATE="POSIX"
>>>> LC_MONETARY="POSIX"
>>>> LC_MESSAGES="POSIX"
>>>> LC_PAPER="POSIX"
>>>> LC_NAME="POSIX"
>>>> LC_ADDRESS="POSIX"
>>>> LC_TELEPHONE="POSIX"
>>>> LC_MEASUREMENT="POSIX"
>>>> LC_IDENTIFICATION="POSIX"
>>>> LC_ALL=
>>>
>>> # locale
>>> locale: Cannot set LC_ALL to default locale: No such file or directory
>>> LANG=en_US.UTF-8
>>
>> Does /usr/lib/locale/en_US.UTF-8 exist?
>>
>> It should probably be "en_US.utf8"
>
> it is
>
> /usr/lib/locale/en_US.utf8
>
>
> I also have what appears to be a balooning number of issues with
> Leap-15.4 so with only days to go 15.5 I think I will just do an
> upgrade, worst case scenario a freshie.
>
>   T-Bird stopped sending yesterday, messages vanish
>   Previously installed Pan2 nowhere to be found
>   Yast Software Managment fails to launch
>   ...and on and on

I have not a single problem.

--
Cheers, Carlos.

Re: Leap-15.4 Yast fails to deploy boot code

<6p2cnSHFg8bXneD5nZ2dnZfqn_dh4p2d@giganews.com>

 copy mid

https://www.novabbs.com/computers/article-flat.php?id=931&group=alt.os.linux.suse#931

 copy link   Newsgroups: alt.os.linux.suse
Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!news.giganews.com.POSTED!not-for-mail
NNTP-Posting-Date: Sun, 04 Jun 2023 21:21:14 +0000
Date: Sun, 4 Jun 2023 17:21:14 -0400
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
Thunderbird/102.11.0
Subject: Re: Leap-15.4 Yast fails to deploy boot code
Newsgroups: alt.os.linux.suse
References: <13idnTPJXfqNU-X5nZ2dnZfqn_WdnZ2d@giganews.com>
<mcenkjxcko.ln2@Telcontar.valinor>
<pqOcnWdYKL5Ps-T5nZ2dnZfqn_UAAAAA@giganews.com>
<lnrokjxa7l.ln2@Telcontar.valinor>
<R6-cnQuK04gXyOf5nZ2dnZfqn_WdnZ2d@giganews.com>
<amhrkjxsrf.ln2@Telcontar.valinor>
<rticnVUUIbwmXeb5nZ2dnZfqnPqdnZ2d@giganews.com>
<879tkjxg6t.ln2@Telcontar.valinor>
<uoKdnUjDqJKOn-H5nZ2dnZfqnPidnZ2d@giganews.com>
<tc2ukjxbh.ln2@Telcontar.valinor>
<xsudnbbTVriW9uH5nZ2dnZfqnPGdnZ2d@giganews.com>
<df0vkjx8in.ln2@Telcontar.valinor>
Content-Language: hu, en-US, fr
From: forget...@INVALID.net (bad sector)
In-Reply-To: <df0vkjx8in.ln2@Telcontar.valinor>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Message-ID: <6p2cnSHFg8bXneD5nZ2dnZfqn_dh4p2d@giganews.com>
Lines: 35
X-Usenet-Provider: http://www.giganews.com
X-Trace: sv3-rDSUv33e/aI48QD1MXTV88T/DrVgtZhqPySVuRmOUan8d25ApADeKt9/IRtWxMrTEb+pQ6P6icpv478!Awv4DLxjZ5Nu9+C1lpmQNdQKraeEkHbMdcioSxoCgL5j9/G8ktNsyzOVZQp92l4S8ce28gbVRug3!+Q==
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
 by: bad sector - Sun, 4 Jun 2023 21:21 UTC

On 6/4/23 14:07, Carlos E.R. wrote:
> On 2023-06-04 12:44, bad sector wrote:

>>> Does /usr/lib/locale/en_US.UTF-8 exist?
>>>
>>> It should probably be "en_US.utf8"
>>
>> it is
>>
>> /usr/lib/locale/en_US.utf8
>>
>>
>> I also have what appears to be a balooning number of issues with
>> Leap-15.4 so with only days to go 15.5 I think I will just do an
>> upgrade, worst case scenario a freshie.
>>
>>    T-Bird stopped sending yesterday, messages vanish
>>    Previously installed Pan2 nowhere to be found
>>    Yast Software Managment fails to launch
>>    ...and on and on
>
> I have not a single problem.

sounds like my holier-than-thou wife

I'm the only one that screws up all the time, to the point of spreading
butter on a slice of bread the wrong way |:-|

1
server_pubkey.txt

rocksolid light 0.9.7
clearnet tor