Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  nodelist  faq  login

I bet the human brain is a kludge. -- Marvin Minsky


computers / alt.os.linux.slackware / latest

Re: sync X11 primary selection and secondary clipboard (thread)

alt.os.linux.slackware

Posted: 57 Minutes ago by: Javier

In xterm you can configure it to put the selected text automatically on the clipboard. From xterm(1) selectToClipboard (class SelectToClipboard) Tells xterm whether to use the PRIMARY or CLIPBOARD for SELECT

Android apps under Slackware64 15.0

alt.os.linux.slackware

Posted: 8 Hours 47 Minutes ago by: Harold Johanssen

Anybody pulled this one off? There is a utility called Anbox that enables Linux to do it - but only if they support snap. I believe that snap is tied to systemd, and therefore not available for Slackware. I am aware of Android x86 and

Alt.OS.Linux.Slackware FAQ pointer

alt.os.linux.slackware

Posted: 20 Hours 10 Minutes ago by: Periodic FAQ Pointer

Posted-By: auto-faq 3.3.1 (Perl 5.022) Archive-name: aolsfaq Current-maintainer: aolsfaq-maintainer@therockgarden.ca FAQ last updated: Fri Apr 15 11:28:45 EDT 2022 This is a periodic pointer to the Frequently-Asked Questions list (FAQ) f

Re: sync X11 primary selection and secondary clipboard (thread)

alt.os.linux.slackware

Posted: 1 Day 2 Hours ago by: Ben Collver

Thanks! I should have phrased it more carefully: I would like to automatically synchronize the X11 primary and clipboard. Your b2p and p2b aliases do what i want, except manually. This can also be manually accomplished using xclip. b2

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 4 Days 17 Hours ago by: Chris Elvidge

Advantages of .lz https://fileinfo.com/extension/lz

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 4 Days 21 Hours ago by: Henrik Carlqvist

Yes, locking at the installation isos for Slackware 14.2 you can see that the source directory has been omitted completely. This is probably because the source directory contains more than 6 GB of data and in itself would not fit on a

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 5 Days 13 Hours ago by: Rich

That looks to be the reason. Your numbers above show the .lz file as a bit over 25% smaller than the .gz original. Multiply an approximate 25% shrink across *all* source packages and you have quite a substantial disk space savings.

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 5 Days 16 Hours ago by: R2-D2

Ok, so this is what I've done: 1) downloaded the folder http://ftp.slackware.com/pub/slackware/slackware-current/source/n/rsync/; 2) made executable, and ran as root, ./rsync.SlackBuild; 3) upgradepkg /tmp/rsync-3.2.4-x86_64-1.txz; 4) h

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 6 Days 10 Hours ago by: Henrik Carlqvist

I would say that in general it would be a better idea to use the Slackbuild script together with sources to try to build the package from current on your stable installation. As you say, kernel and library versions might differ. Those

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 6 Days 14 Hours ago by: R2-D2

Ok, the kernel may be fine, but this is what I get when running rsync-3.2.4 from current on a 15.0: rsync: /lib64/libc.so.6: version `GLIBC_2.34' not found (required by rsync) I'd rather not mess up other things trying to install glibc

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 6 Days 16 Hours ago by: Chris Elvidge

Why would the kernel version make a difference? Void (for e.g.) has rsync 3.2.4 and kernel 5.16.20

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 6 Days 18 Hours ago by: R2-D2

Wow, you are right! http://ftp.slackware.com/pub/slackware/slackware64-current/slackware64/n/rsync-3.2.4-x86_64-1.txz But I wonder, is it safe in general to install current packages in a stable version? Current has a different kernel ver

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 7 Days 1 Hour ago by: root

Thanks for responding Henrik. The md5sum did check, that was not my problem. I had done: dd if=isofile of=/dev/somedev. The resulting USB stick did not boot. Instead I used unetbootin and got a working stick.

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 7 Days 1 Hour ago by: root

Thanks.

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 7 Days 1 Hour ago by: root

I have a gigabit connection. The download time was not accurately reflected by the continuing report. The download did finish. In searching around the 15.0 docs, I came across a statement that from now on, the .iso files could be copied

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 7 Days 11 Hours ago by: Chris Elvidge

Have you looked in Slackware-current? e.g. https://mirror.bytemark.co.uk/slackware/slackware64-current/slackware64/n/

Re: weird rsync behaviour after switch to 15 (thread)

alt.os.linux.slackware

Posted: 7 Days 12 Hours ago by: R2-D2

3.2.4 came out a month ago: https://download.samba.org/pub/rsync/NEWS#3.2.4 but it hasn't made its way into the slackware-15.0 repo yet. I guess it's time to learn to build my own packages. :-)

Re: Chromium in Slackware64 15.0 not working with nouveau (thread)

alt.os.linux.slackware

Posted: 7 Days 21 Hours ago by: Henrik Carlqvist

My guess is that if it hasn't been fixed by now it will not be fixed as there are only few people still interested in those old cards. On systems where hardware accelerated GLX are unreliable I usually set the environment variable LI

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 7 Days 21 Hours ago by: Henrik Carlqvist

If you want to be really sure that the files are OK you could also check the gnupg signature of the file CHECKSUMS.md5 by running: gpg --verify CHECKSUMS.md5.asc That should give you an output looking something like: gpg: assuming si

Chromium in Slackware64 15.0 not working with nouveau

alt.os.linux.slackware

Posted: 8 Days 2 Hours ago by: Doug Weiman

I have an old (but still very functional) PC that comes with a built-in graphics device from Nvidia. This device is quite old, which implies that the closed-source Nvidia driver are not compatible with the kernel in 15.0. I therefore ha

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 8 Days 7 Hours ago by: Chris Elvidge

https://download.liveslak.org /

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 8 Days 7 Hours ago by: Rich

No wonder it times out, that is a slow download by today's standards. What speed connection to the internet do you have? If you don't know, you can try speedtest.com.

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 8 Days 8 Hours ago by: root

Thanks for responding. I wasn't able to find live versions of, say, current on the standard mirror sites. I googled for: slackware live current And started working through the sites that came up. Just watching the expected download times

Re: Please suggest a mirror (thread)

alt.os.linux.slackware

Posted: 8 Days 10 Hours ago by: Rich

Slackware's mirror list is at: https://mirrors.slackware.com/mirrorlist/ Just try ones in the same country as you. Also, verify you got the data without something glitching by checking the files using the CHECKSUMS.md5 file before you

Please suggest a mirror

alt.os.linux.slackware

Posted: 8 Days 11 Hours ago by: root

I want to make a live usb stick of either 15.0 or current. I have tried 5 different mirrors, including Alien Bob, and they either time out before I get the whole file, or when dd'd to a usb stick they don't work. Thanks.

Re: ffmpeg built ho in Slackware64 15.0 (thread)

alt.os.linux.slackware

Posted: 10 Days 11 Hours ago by: noel

beware aliens deps it was easier to remove, blacklist ad build from source, just like ive been doing since day dot

Alt.OS.Linux.Slackware FAQ pointer

alt.os.linux.slackware

Posted: 10 Days 20 Hours ago by: Periodic FAQ Pointer

Posted-By: auto-faq 3.3.1 (Perl 5.022) Archive-name: aolsfaq Current-maintainer: aolsfaq-maintainer@therockgarden.ca FAQ last updated: Fri Apr 15 11:28:45 EDT 2022 This is a periodic pointer to the Frequently-Asked Questions list (FAQ) f

Re: sync X11 primary selection and secondary clipboard (thread)

alt.os.linux.slackware

Posted: 12 Days 10 Hours ago by: Grant Taylor

Hi, I'm not sure if you're wanting something that you manually initiate or is automatically initiated in the background. I use `xsel` do to this manually. You seem to be missing a piece of the puzzle. X11 traditionally has three b

Re: ffmpeg built ho in Slackware64 15.0 (thread)

alt.os.linux.slackware

Posted: 12 Days 13 Hours ago by: Edwin Johnson

---------- To build ffplay, need to install SDL2 library. I had to install new version of libass also. In configure: --enable-libass --enable-libmp3lame --enable-libpulse --enable-libv4l2 --enable-libx264 --enable-gpl --libdir=/usr/local

Re: ffmpeg built ho in Slackware64 15.0 (thread)

alt.os.linux.slackware

Posted: 12 Days 23 Hours ago by: Rinaldi

--------------- You might take a look here: http://www.slackware.com/~alien/slackbuilds/ffmpeg/ Rinaldi

Re: ffmpeg built ho in Slackware64 15.0 (thread)

alt.os.linux.slackware

Posted: 12 Days 23 Hours ago by: Harold Johanssen

Well, that works fine: I rebuilt from source, using the software delivered with Slackware, making sure that x264 is supported, replaced the ffmpeg packaged shipped with this one, and it worked as expected.

Re: ffmpeg built ho in Slackware64 15.0 (thread)

alt.os.linux.slackware

Posted: 13 Days 1 Hour ago by: Harold Johanssen

To answer my own question, I just noticed that when launching ffmpeg it prints out the following: configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --docdir=/usr/doc/ffmpeg-4.4.1/html --mandir=/usr/man --disabl

ffmpeg built ho in Slackware64 15.0

alt.os.linux.slackware

Posted: 13 Days 2 Hours ago by: Harold Johanssen

ffmpeg can be built with support for lots of different video formats. Anybody know exactly how the package is built for Slackware64 15.0? I had a look into the corresponding Slackbuild file, as distributed with Slackware64 15.0, and i

How to turn off GDB colors?

alt.os.linux.slackware

Posted: 14 Days 10 Hours ago by: root

Slack 15.0 introduced a version of gdb that uses a terminal interface tui. How can I disable tui by default? I don't want the colors, and I don't want to type Ctl-a ctl-x at the start. If I ever want the styling stuff I can always use -tu

Re: 'shutter' slackbuild (thread)

alt.os.linux.slackware

Posted: 15 Days 9 Hours ago by: User

slpkg is an excellent tool. I also tried it on the machine that I manually built shutter. It was able to identify the packages I had forgotten to install for 'shutter' from the dependency tree: https://i.imgur.com/ILwkhpe.png and in

Re: 'shutter' slackbuild (thread)

alt.os.linux.slackware

Posted: 15 Days 11 Hours ago by: User

Thank you! Tested on a virtual machine and was able to install shutter using 'slpkg -s sbo shutter'.

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 15 Days 15 Hours ago by: Ralph Spitzner

had some rust related quirks to solve, but it's on sbo now :-) It's really fun to watch it work during commercial breaks on tv amazing what songs they stuff into them.... -rasp

Re: 'shutter' slackbuild (thread)

alt.os.linux.slackware

Posted: 15 Days 17 Hours ago by: Henrik Carlqvist

I can't say for sure as I have only used slpkg since about 2016 myself, but looking in the changelogs of slpkg I see "slpkg -s sbo" mentioned the first time 2014 in the changelog of version 1.6.9 - 04/08/2014. Version 1.6.9 might see

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 16 Days 8 Hours ago by: Clark Smith

SongRec turned up in the Slackbuilds repository yesterday - which is a very good thing, for I don't think I had the stamina and/or savvy to get it to work under Slackware 15.0 on my own. Anyway, I used SongRec, together with a Bash s

sync X11 primary selection and secondary clipboard

alt.os.linux.slackware

Posted: 16 Days 11 Hours ago by: Ben Collver

Hi, I would like to synchronize the X11 primary selection and secondary clipboard. My goal is to select text in rxvt and then use the Edit/Paste menu to paste it into leafpad. I installed autocutsel from slackbuilds.org because it looke

Re: 'shutter' slackbuild (thread)

alt.os.linux.slackware

Posted: 16 Days 13 Hours ago by: root

Wow. Very good information Henrik. Has the -s option always been available? I always used -b and had to resolve the dependencies myself.

Re: 'shutter' slackbuild (thread)

alt.os.linux.slackware

Posted: 16 Days 16 Hours ago by: Henrik Carlqvist

slpkg -s sbo shutter Will download, compile and install a package like shutter with all its recursive dependencies. The required dependencies are read from the .info files like shutter.info. https://dslackw.gitlab.io/slpkg/ regards

Re: 'shutter' slackbuild (thread)

alt.os.linux.slackware

Posted: 17 Days 2 Hours ago by: User

Here is a screenshot (taken with the 'shutter' software) of all the packages required to install it. https://i.imgur.com/RuR92vh.png

'shutter' slackbuild

alt.os.linux.slackware

Posted: 17 Days 3 Hours ago by: User

https://slackbuilds.org/repository/15.0/graphics/shutter/ I installed this by hand. It required a total of 83 additional packages. None of these packages required any special sort of configuration setting to build/install. All the GPG

USB bind/unbind garbage in Slack 15.0

alt.os.linux.slackware

Posted: 17 Days 3 Hours ago by: root

I recently had a problem connecting and reading a USB device (Garmin Forerunner). It took me about 8 hours to find and fix the problem, all because of some insane change in the 15 kernel. As far as I can tell, when you connect a usb devi

Re: Cannot read Garmin device on Slack15 (thread)

alt.os.linux.slackware

Posted: 17 Days 3 Hours ago by: root

Thanks Lew. I got the device to work. Since I don't suppose anyone without a Garmin is following this thread I will present the solution in a separate post.

Re: Cannot read Garmin device on Slack15 (thread)

alt.os.linux.slackware

Posted: 17 Days 11 Hours ago by: Lew Pitcher

[snip] Have you read (and followed the directions in) https://www.gpsbabel.org/os/Linux_Hotplug.html ? Have you asked on the gpsbabel mail list? (https://sourceforge.net/p/gpsbabel/mailman/)

Cannot read Garmin device on Slack15

alt.os.linux.slackware

Posted: 17 Days 12 Hours ago by: root

I have been trying to read data from my garmin301 forerunner. I used sbopkg to build gpsbabel. I then used slackpkg to update all (manY). With 14.2 and previous I used this command to access the data: gpsbabel -t -i garmin -f usb: -o gtr

USB problem with Slackware 15.0

alt.os.linux.slackware

Posted: 17 Days 19 Hours ago by: root

I've never had as many problems with a new distribution as with 15.0 I hope there was a good reason to have so many configuration changes. ssh doesn't work the same as it did. Console display defaults to UTF-8, yada yada... I don't seem t

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 17 Days 21 Hours ago by: Henrik Carlqvist

Yes, that will probably be neccessary, on Slackware 14.2 "ldd /usr/bin/fetchmail" shows: linux-vdso.so.1 (0x00007ffe78bc2000) libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00007f98e49ac000) libresolv.so.2 => /lib64/li

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 18 Days 7 Hours ago by: Chris Vine

By the way, the above answers the question you asked. But there is a further point about how you compile fetchmail against openssl-1.1 when you want to retain openssl-1.0 as your "system" version. Probably the best way is to install ope

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 18 Days 8 Hours ago by: Chris Vine

Some libraries do allow multiple versions of the same library to be installed and linked to concurrently, as they mangle function names to include the version number in the function name (icu4c is an example of this), but most do not. Th

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 18 Days 11 Hours ago by: Ralph Spitzner

unless they've changed the api, old call should still be there, Ionly had problems the other way around.. (newer programs, older libraries) of course there are programs which want to open a lisomething.x.y.so explicityly so for testing y

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 18 Days 13 Hours ago by: Giovanni

Not a good idea, unless you relink every program using old libraries. I need TLS 1.3 mainly for fetchmail that I upgraded to 6.4.27 but compiled with openssl 1.0.2 and now I'd like to upgrade also openssl. I need to understand if new an

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 18 Days 15 Hours ago by: Ralph Spitzner

just try upgradepkg ? -rasp

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 18 Days 16 Hours ago by: Giovanni

Last week I started working on porting openssl-1.1.1n from 15.0 to 14.2 to get TLS 1.3 on 14.2 Using slackbuild from 15.0 the package compiles correctly but I haven't yet installed and tested. As soon as I'll have some spare time I'll

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 19 Days 18 Hours ago by: root

Thanks for responding Henrik. I came to the same conclusion and am now trying out 15.0.

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 19 Days 21 Hours ago by: Henrik Carlqvist

Even though Slackware 14.2 with its age of almost 6 years is still being maintained, it only gives security updates to packages where the upstream providers gives releases which still works with Slackware 14.2. A number of packages lik

Re: (n)vi (thread)

alt.os.linux.slackware

Posted: 20 Days 5 Hours ago by: John McCue

I was unaware of the functionality you asked about, but yes it happens to me also. So I checked at work on our AIX box, and on the "real" vi (Version 3.10) it works the same exact way. So I am fairly sure that is why we see that happe

Re: (n)vi (thread)

alt.os.linux.slackware

Posted: 20 Days 6 Hours ago by: Poprocks

I'm guessing you're using the 'Home' button to return to the beginning of the line? On my machines, if I hit Home while in insert mode on nvi, it inserts a junk character, and *then* goes into normal mode. So then when you hit Home again

Re: (n)vi (thread)

alt.os.linux.slackware

Posted: 20 Days 6 Hours ago by: Ron

Sorry, I knew that wasn't well written. I was wondering why it switches to command mode when you move to the 1st of a line. (Though it certainly doesn't hurt to know the reason for the shift to nvi!) --Ron

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 20 Days 8 Hours ago by: root

There is a new version of fetchmail: fetchmail-git-156d9cf5813241706bc7cffb17aaaae3a3fa8226.zip but it will not make because: configure: error: Your SSL library is too old and does not support TLS v1.3. Upgrade. So I tried updating an

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 20 Days 10 Hours ago by: root

getmail doesn't seem to work for me. I think I remember that I switched to fetchmail some time ago because getmail stopped working. This is the .getmailrc file I am using: [retriever] type = SimplePOP3Retriever server = pop.gmail.com u

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 20 Days 11 Hours ago by: root

Thanks, I will look into getmail.

Re: (n)vi (thread)

alt.os.linux.slackware

Posted: 20 Days 12 Hours ago by: Ben Collver

I don't know why, but i suspect it has something to do with gaining support for UTF-8 [1]. It was an install-time option for me whether i wanted Slackware 15.0 to use elvis, nvi, or vim. When i run "ls -l /usr/bin/vi" it shows up as a s

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 20 Days 18 Hours ago by: #Paul

FWIW, there's been some discussion of OAuth &etc on the fetchmail mailing list recently. #Paul

Alt.OS.Linux.Slackware FAQ pointer

alt.os.linux.slackware

Posted: 20 Days 20 Hours ago by: Periodic FAQ Pointer

Posted-By: auto-faq 3.3.1 (Perl 5.022) Archive-name: aolsfaq Current-maintainer: aolsfaq-maintainer@therockgarden.ca FAQ last updated: Fri Apr 15 11:28:45 EDT 2022 This is a periodic pointer to the Frequently-Asked Questions list (FAQ) f

(n)vi

alt.os.linux.slackware

Posted: 20 Days 22 Hours ago by: colonel_hack

slackware 15.0 has changed to nvi and now it behaves like FreeBSD's vi: In insert mode when you move to the first of a line it switches to command mode. I'd rather it didn't but it hasn't worried me enough to look into how to change it.

Re: Oauth 2.0 (thread)

alt.os.linux.slackware

Posted: 21 Days 5 Hours ago by: Ben Collver

I don't know the answer to your question, but in case you need other options, Slackware's getmail package supports OAuth 2.0

Oauth 2.0

alt.os.linux.slackware

Posted: 21 Days 5 Hours ago by: root

I saw a reference to 7.x version of Fetchmail from GitHub, but now I can't find it. I am pretty sure the Slackware packages for fetchmail do not support the new authorization method. Is it likely that a Slackware package will appear before

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 23 Days 9 Hours ago by: anonymous

uuuhm acktttuallly; corporations are your god and you owe them your arm, leg, and first born child. Their word is supreme and you must obey. You vil own nothing and you vil be happy. Make sure to carry your tracking device around with you

Re: Doublebooting (thread)

alt.os.linux.slackware

Posted: 26 Days 16 Hours ago by: Pascal Hambourg

No, Windows cannot boot from a GPT partitioned disk with BIOS nor a DOS partitioned disk with UEFI. It can only boot from a DOS partitioned disk with BIOS or a GPT partitioned disk with UEFI.

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 27 Days 7 Hours ago by: Eli the Bearded

Identification with a CD present rarely uses fingerprinting. The disk table of contents (TOC) is much more likely to be used. TOCs are about 100 bytes and can be optimized down to millisecond calculation and lookup. Fingerprints are ~1 ki

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 27 Days 9 Hours ago by: Clark Smith

Thanks everybody for your suggestions. Although things are not quite as dire as I thought, they are not going to be a walk through the park either.

Re: Doublebooting (thread)

alt.os.linux.slackware

Posted: 27 Days 12 Hours ago by: Dan C

Which one did I say? Lilo. In my case, /dev/sda1 Kind of a stupid question, because it does not matter. That does not compute. Can't be answered.

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 27 Days 13 Hours ago by: #Paul

I use picard, which does lookups at musicbrainz. If you put the relevant cd in your drive it will return (hopefully) the album's track info which you can then copy over to any pre-ripped files. I find this covers most of my collection, b

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 27 Days 15 Hours ago by: Ralph Spitzner

wow this is really fun to play with :-) set recording to loopback and clicked around youtube in the browserto test it and hey, presto! -rasp

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 27 Days 15 Hours ago by: Chris Elvidge

There's a Shazam extention to Chrome.

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 27 Days 21 Hours ago by: Henrik Carlqvist

You really wish that you had used some cddb stuff back then when you ripped them. For Android, there are stuff like shazam. A quick google gave me this video in french: https://www.youtube.com/watch?v=IU-vWxMI7O0 Another google poi

Re: Identifying music tracks (thread)

alt.os.linux.slackware

Posted: 28 Days ago by: Eli the Bearded

I believe the RIAA position (and copyright law) is if you don't own the CD anymore, you don't own the digital backup anymore. It's legally the same as having pirated them. I won't tell if you won't, though. It doesn't take AI, it's a st

Identifying music tracks

alt.os.linux.slackware

Posted: 28 Days 2 Hours ago by: Clark Smith

Not strictly Slackware-related, but maybe somebody in this forum can come up with useful suggestions. I have a large collection of music files ripped from CDs over the years. Many of those files have highly non-descriptive names - and

Re: Slackware 15 torrents (thread)

alt.os.linux.slackware

Posted: 28 Days 18 Hours ago by: David Chmelik

They're on the official Slackware web-forum on LinuxQuestions.org .

82 recent articles found.

rocksolid light 0.7.2
clearneti2ptor