Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  nodelist  faq  login

"Don't fear the pen. When in doubt, draw a pretty picture." -- Baker's Third Law of Design.


computers / news.software.readers / latest

Re: DIALOG turns entire paragraphs red during the automatic spell check process (thread)

news.software.readers

Posted: 6 Days 17 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message news:1opfvliy63ath.dlg@b.rose.tmpbox.news.arcor.de... That's the most logical explanation that fits the evidence. When it happens, I turn spellchecking off and then back on. Often (b

Re: DIALOG turns entire paragraphs red during the automatic spell check process (thread)

news.software.readers

Posted: 6 Days 17 Hours ago by: Bernd Rose

Sometimes, word boundary detection of the Dialog composition window gets out of synch. In my experience, deleting and re-entering a character from the first word of the text with red underlining re-initializes the word boundary detectio

Re: DIALOG turns entire paragraphs red during the automatic spell check process (thread)

news.software.readers

Posted: 6 Days 20 Hours ago by: Jim S

You need to set a default language/dictionary from the right-box next to the spellcheck tick box.

DIALOG turns entire paragraphs red during the automatic spell check process

news.software.readers

Posted: 6 Days 21 Hours ago by: wasbit

Often something triggers the Dialog automatic spell check algorithm to turn entire lines (sometimes the entire article I'm composing) red. To stop it, I click spell checking on and off a few times. That seems to "slap" Dialog's spell chec

Re: [slrn] Ubuntu wiki update (thread)

news.software.readers

Posted: 7 Days 7 Hours ago by: Lewis

The only thing that stands out to me at all on a quick skim, and it is minor, is that I would rewrite the first part under mstmp to make it more clear that one can easily go for years (decades, in my case) without needing mstmp at all

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 7 Days 14 Hours ago by: Lewis

Not there (well, in /opt/homebrew/... on an M1 machine. mdfind -name mime.sl on my mac, no results and locate mime.sl on FreeBSD, no results. However, I did find it in a backup of my FreeBSD 12.x install from before I went to Freebsd

Re: [slrn] Ubuntu wiki update (thread)

news.software.readers

Posted: 8 Days 16 Hours ago by: Ted Heise

I did not read in detail, but skimmed down through the main page. Seems very solid. Thanks (yet again) for your contributions to the community!

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 9 Days ago by: issdr

~ % brew ls --verbose slrn | grep mime /usr/local/Cellar/slrn/1.0.3a_1/share/slrn/slang/mime.sl (or `locate mime.sl' in case you've trained it)

[slrn] Ubuntu wiki update

news.software.readers

Posted: 9 Days 5 Hours ago by: andrew

https://help.ubuntu.com/community/slrn This little document started on my own personal web space, lived briefly on the Ubuntu Forums and has now had its final polish on the Ubuntu Community Wiki. That covers a time period of about 20 ye

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 9 Days 10 Hours ago by: Lewis

Hmm.. I wonder why homebrew has elided that file then.

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 9 Days 16 Hours ago by: issdr

~ $ wget http://jedsoft.org/releases/slrn/slrn-1.0.3a.tar.bz2 --2022-05-13 23:13:13-- http://jedsoft.org/releases/slrn/slrn-1.0.3a.tar.bz2 Resolving jedsoft.org (jedsoft.org)... 199.180.249.46 Connecting to jedsoft.org (jedsoft.org)|199

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 9 Days 19 Hours ago by: Lewis

Where is mime.sl and/or mime-support.sl? A quick query on DDG did not help, but did turn up some useless mentions about other decoders for slrn from 2005.

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 10 Days 17 Hours ago by: issdr

actually it seems the way TB manages OpenPGP signed, base64ed articles. a charm Tavis, thank you very much

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 10 Days 20 Hours ago by: Tavis Ormandy

Ahh - you're right, it seems like Thunderbird users are sending CRLF line endings. That's weird. You could try a patch to mime.sl like this: --- /usr/share/slrn/slang/mime.sl 2022-05-12 10:50:21.980521000 -0700 +++ /usr/share/slrn/

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 10 Days 22 Hours ago by: issdr

i followed up to my own post. not a regular user here, i found that out right after doing such a mess... btw, could you check that message on linux.debian.devel and see whether you get those nasty cr's too?

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 10 Days 23 Hours ago by: Tavis Ormandy

Hmm - it's not clear to me what mime-support.sl does that just the plain mime.sl that comes with slrn doesn't do? FWIW, I just have `interpret "mime.sl"` and I can read multipart messages just fine, I've never noticed any line ending pro

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 12 Days 2 Hours ago by: issdr

simpler way for version 1.0.3 is mime.sl not better though, same output. i'm thinking about a macro to strreplace those line ends. any suggestions?

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 12 Days 22 Hours ago by: Lewis

<http://www.fpx.de/fp/Software/UUDeview/> I don't know that distro, but on my FreeBSD it is in ports. /usr/ports/converters/uudeview It is also in homebrew.

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 2 Hours ago by: Michael Uplawski

Here is one site proposing downloads: https://pkgs.org/download/uudeview But as this appears to be the same (quite old) version of uudeview, you can also consult the uudeview homepage: http://www.fpx.de/fp/Software/UUDeview/ and there t

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 2 Hours ago by: John D Groenveld

<URL:http://www.fpx.de/fp/Software/UUDeview/> John groenveld@acm.org

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 2 Hours ago by: issdr

that's a multipart, gpg signed message, not simply a base64 encoded post. https://user.fm/files/v2-838561f84fe4c1c18c853f227cbe9255/Clipboard.png this is how i got to view it properly in slrn, *almost* (bad, weird line ends). there mig

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 5 Hours ago by: William Unruh

OK, I am simply using my distribution (Mageia 8) version of slrn. So I guess I am going to have to recompile it for myself and put in a bug report to the distribution. Thanks for the suggestions. Where do I find the uudeview library (

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 8 Hours ago by: Michael Uplawski

As the OP's slrn was compiled without the uudeview configure-option, it is quite normal that slrn does not automatically decode the posts concerned. I just checked my own configure-option and can confirm that *+uudeview* appears do be a

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 13 Hours ago by: Lewis

uudeview probably does UUdecoding, so that one?

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 13 Hours ago by: Lewis

Really? I do not see base64 posts. Where are these people posting? Which probably indicates you can just ignore them, that's what I would do. slrn has base64 decoding built-in, as I recall. Can you just pretend the post is a binary?

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 14 Hours ago by: William Unruh

Just to add definitelness here is the latest post of this type I ran acress. But I have probably run across about 10 of them in the past few months ----------------------------------------- From: Paul Gevers <elbrus@debian.org> Newsgroups

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 14 Hours ago by: William Unruh

These are the only differences with mine. -canlock, -ssl -uudeview instead of your +s. Not sure which of those three would make the differnce.

Re: slrn and reading base64 encoded posts (thread)

news.software.readers

Posted: 13 Days 15 Hours ago by: issdr

not a problem here... Welcome to the Emacs shell ~ $ slrn --version slrn 1.0.3 S-Lang Library Version: 2.3.2 Operating System: Linux COMPILE TIME OPTIONS: Backends: +nntp +slrnpull +spool External programs / libs: +canlock +inews +s

slrn and reading base64 encoded posts

news.software.readers

Posted: 13 Days 16 Hours ago by: William Unruh

It seems that more and more people are posting as base64 encoded posts. Presumably some idiotic reader is encoding news posts before posting. slrn does not seem to translate these into something readable. a) Is there some way of getting sl

Re: DIALOG won't open URLs with single or doubleclick (thread)

news.software.readers

Posted: 14 Days 20 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message news:dsxcewqhtrgb$.dlg@b.rose.tmpbox.news.arcor.de... The Windows settings solved it! It has nothing to do with Dialog. But I did uncheck the IE setting as per VanguardLH. Thanks.

Re: DIALOG won't open URLs with single or doubleclick (thread)

news.software.readers

Posted: 15 Days 16 Hours ago by: VanguardLH

Single-click on URLs works for me; however, I do *not* have the following setting enabled: Open clicked URLs in new IE windows "Windows" doesn't say which edition, version, or feature update you are using. For Windows 10, changes we

Re: DIALOG won't open URLs with single or doubleclick (thread)

news.software.readers

Posted: 16 Days 8 Hours ago by: Bernd Rose

This is only implemented for text/plain view. Therefore, make sure that the links which failed on you were not links shown on the html view of Dialog. Because InternetExplorer reaches EOL, Microsoft pushed Edge in the last couple of mo

DIALOG won't open URLs with single or doubleclick

news.software.readers

Posted: 16 Days 9 Hours ago by: wasbit

Dialog Settings > General settings > Misc URLs execute on single click It used to work but then it stopped working. https://i.postimg.cc/Jz5h0p4N/Clipboard.jpg Now nothing happens no matter how many times I click on any URL in Dialog.

Re: Dialog database recovery sequence.( DIALOG settings.ini identity syntax section locations) (thread)

news.software.readers

Posted: 16 Days 20 Hours ago by: Bernd Rose

Apart from intermediate draft states of messages you compose, nothing really comes to mind. After CompactDatabase your Data folder probably has nearly the same size as its latest backup. Numbers of the group files are, nevertheless, like

Dialog database recovery sequence.( DIALOG settings.ini identity syntax section locations) (thread)

news.software.readers

Posted: 17 Days 6 Hours ago by: Sqwertz

I'll tell you mine (although you'll probably denounce it ;-) I do a compress every so often, but since I never delete anything, that basically just serves a backup - unless Dialog keeps other housekeeping info in there that it deletes

Re: Dialog script library (thread)

news.software.readers

Posted: 18 Days 5 Hours ago by: Jim S

That's the one. Thanks

Re: Dialog script library (thread)

news.software.readers

Posted: 18 Days 8 Hours ago by: Bernd Rose

Only the archived version: http://web.archive.org/web/20180803232702/http://dialog.datalist.org/scripts/script_library.html Some individuals still have their own scripts online, like: http://www.barghahn-online.de http://4d.vollmeier.at

Dialog script library

news.software.readers

Posted: 18 Days 14 Hours ago by: Jim S

Iseem to remember that years ago I had a script library for 40tude Dialog. Is it still on line?

Re: Gravity - No Longer Connects to News Server (thread)

news.software.readers

Posted: 18 Days 15 Hours ago by: Boris

Anthony Soprano <Soprano@newjersey.invalid> wrote in news:t4upka$fbd$1@dont-email.me: It's very odd. Both my Gravity and Xnews readers have eternal-september set up as port 119. It seems that what allows me to log on to eternal- septe

Re: Gravity - No Longer Connects to News Server (thread)

news.software.readers

Posted: 18 Days 17 Hours ago by: Anthony Soprano

SSL server on eternal-september is down. You can set up your news reader to use port 119

Re: Virtual folders for watched threads (thread)

news.software.readers

Posted: 18 Days 18 Hours ago by: issdr

thanks for sharing Tristan

Re: Virtual folders for watched threads (thread)

news.software.readers

Posted: 18 Days 19 Hours ago by: Tristan Miller

Greetings. On 21/04/2022 20.47, issdr wrote: It's already been done, in a manner of speaking. The add-on doesn't work with newer versions of Thunderbird because the new WebExtension API exposes no method for filtering messages. A fe

Gravity - No Longer Connects to News Server

news.software.readers

Posted: 21 Days 14 Hours ago by: Boris

I had Gravity configured and working fine. Today, I had to reset my wifi router (Netgear R6400). Even though Gravity is running on my ethernet connection to the router, when I launch Gravity, I get this: https://postimg.cc/8JrnhC1j R

stats 2022-04

news.software.readers

Posted: 21 Days 19 Hours ago by: The Doctor

Group : news.software.readers Statistics : from 4/1/2022 to 4/30/2022 ***** Users with most messages ***** num| Name | Nb Msg | size | or. | % ----|-------------------------------|--------|--------|-----|-------

XanaNews Statistic for news.software.readers. 5/1/2022 12:20:01 PM

news.software.readers

Posted: 21 Days 19 Hours ago by: The Doctor

XanaNews Statistic for news.software.readers. 5/1/2022 12:20:01 PM From article 144712 (4/1/2022 1:09:43 AM) to article 144759 (4/30/2022 5:04:34 PM) Number of threads ................... 9 Number of articles .................. 49 Aver

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 21 Days 21 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message <news:19xtwevs1h9t$.dlg@b.rose.tmpbox.news.arcor.de>... I understand as I had looked in the help before I had asked. I was hoping there was an existing parsing like the date has Yea

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 21 Days 22 Hours ago by: Bernd Rose

The variable %full-name% is the name part of the whole %from% address. Apart from this, no further variants of these two variable are available. It is theoretically possible to parse and alter the attribution line in an OnBeforeSending

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 21 Days 23 Hours ago by: wasbit

"Bernd Rose <b.rose.tmpbox@arcor.de>" wrote in message <news:16jx91gc46kd6$.dlg@b.rose.tmpbox.news.arcor.de>... Fair enough. It's not a message-id without the angle brackets. Do you know if Dialog can break the %from% & %full-name% apart

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 22 Days 6 Hours ago by: Bernd Rose

From RFC850 - 2.1.7 Message-ID: | The angle brackets are considered part of the message ID. https://www.freesoft.org/CIE/RFC/850/10.htm Bernd

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 22 Days 14 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message news:18tsdrmhthtab$.dlg@b.rose.tmpbox.news.arcor.de... That means it's not typically customized by the user. At least, I wouldn't have customized it, so I don't need to back it up spe

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 22 Days 15 Hours ago by: Bernd Rose

Each newsgroup is usually accompanied by a textual description. For nsr you probably can read "Discussing software for reading network news (Usenet)." above the message header pane. The file alldsc.dss contains the whole list of group n

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 22 Days 18 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de>" wrote in message news:1brrhxpd0sk6g$.dlg@b.rose.tmpbox.news.arcor.de... Thanks for all the advice. I learned what I didn't know which makes my next backup easier. The most recent problem of not see

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 22 Days 18 Hours ago by: Bernd Rose

It will not be altered. User added words go to the user dictionaries. These should be recognizable by your name. Apart from this: If you look into them you'll see a reference to "Addict Dictionary Compiler" with pre-compiled dictionaries

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 22 Days 20 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message news:4e3uhxg2tbf6$.dlg@b.rose.tmpbox.news.arcor.de... I didn't know that Dialog could be copied without installing. Thank you. Mine is in c:\dialog Good to know. That's easier. Ju

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 1 Hour ago by: Bernd Rose

40tude Dialog is completely self-contained. Some user scripts have been relying on absolute paths and therefore would need adjustment. Apart from this, the whole Dialog directory could be copied to whatever location (even USB thumb driv

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 3 Hours ago by: wasbit

"wasbit" <wasbitREMOVE@hotmail.com> wrote in message news:t4j2v5$3k3$1@dont-email.me... Sorry. I said the wrong word "backup" above so I fix that below for clarity. To clarify what I do is I periodically make a backup of the whole dialo

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 3 Hours ago by: wasbit

"wasbit" <wasbitREMOVE@hotmail.com> wrote in message news:t4j2lf$1kg$1@dont-email.me... To clarify what I do is I periodically make a backup of the whole dialog directory and then when the original gets corrupted, then I delete that entir

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 3 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de>" wrote in message news:11kgreixfjb9q$.dlg@b.rose.tmpbox.news.arcor.de... Not really. I make a full backup periodically because corruptions are frequent enough and you never know what got corrupted. B

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 6 Hours ago by: Bernd Rose

If I understand correctly, you recreate everything from scratch? (Instead of restoring a current backup.) I'd rather suggest to keep a full backup of the Dialog folder and its subfolders (with the exception of "data") and replace it,

Re: Trying Out Gravity (thread)

news.software.readers

Posted: 23 Days 12 Hours ago by: Lafe

Slava Ukraini :)

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 14 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message news:jj9ur27pmzkh.dlg@b.rose.tmpbox.news.arcor.de... For some reason my brain didn't initially correctly process that you said this is a step that I have NOT been doing - & which I ha

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 14 Hours ago by: wasbit

"Sqwertz" <sqwertzme@gmail.invalid> wrote in message news:1x7gezrtpsz17.dlg@sqwertz.com... For this question it really doesn't matter why Dialog gets corrupted. It only matters that Dialog does get corrupted. I'm not blaming Dialog. I wo

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 14 Hours ago by: wasbit

"Bernd Rose" <b.rose.tmpbox@arcor.de> wrote in message news:jj9ur27pmzkh.dlg@b.rose.tmpbox.news.arcor.de... I have years of experience with Dialog so I have a tested sequence to repopulate the setup when Dialog gets corrupted, but I don't

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 15 Hours ago by: Sqwertz

This had happened to me during plenty power outages/improper shutdowns (while Dialog is idle) and when I've been downloading hundreds of thousands of headers. -sw

Re: DIALOG settings.ini identity syntax section locations (thread)

news.software.readers

Posted: 23 Days 19 Hours ago by: Bernd Rose

It shouldn't. Despite its age, corruption of the setup and/or database of Dialog is /not/ to be expected. Maybe there is some general problem, like an unsuitable path of installation (UAC protected folder), an interfering AV program, o

Re: Trying Out Gravity (thread)

news.software.readers

Posted: 24 Days 2 Hours ago by: Sn!pe

Sometimes I think Gordon owns me, rather than the other way about. It's more a symbiotic partnership, really. ≈:o)

Re: Trying Out Gravity (thread)

news.software.readers

Posted: 24 Days 12 Hours ago by: RStreets

snipeco.2@gmail.com (Sn!pe) wrote in news:1pr5970.fvrz3hza68zwN%snipeco.2@gmail.com: Thanks very much. I went there originally, but was looking for something Gravity specific. The answer was here "Once you set the news reader to alwa

Re: Trying Out Gravity (thread)

news.software.readers

Posted: 24 Days 16 Hours ago by: Sn!pe

This a FAQ, see item 2 here: <https://www.eternal-september.org/index.php?showpageúq>

Re: Trying Out Gravity (thread)

news.software.readers

Posted: 24 Days 16 Hours ago by: RStreets

RStreets <streets@invalid.invalid> wrote in news:t4f16a$a85$1@dont-email.me: OK. Link 'read all articles' to the particular newsgroup.

Trying Out Gravity

news.software.readers

Posted: 24 Days 16 Hours ago by: RStreets

I'm trying Gravity 3.0.11, using "news.eternal-september.org" as my news server, but can only get it to load eternal-september groups. How do I configure it to load all newsgroups. Also, I notice that when I read an article, it disappear

DIALOG settings.ini identity syntax section locations

news.software.readers

Posted: 24 Days 19 Hours ago by: wasbit

Every once in a while Dialog gets corrupted which isn't a problem because it can easily be reinstalled and then repopulated before the GUI is run as long as I've archived a few of the most important custom setup repopulation files such as s

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 26 Days 20 Hours ago by: Jim S

PS. Just checked and found this: Program PlonkWithAddress; //v0.4 24/Gennaio/2005, by MLC uses Forms, StdCtrls; var myForm: TForm; myMemo: TMemo; mail: string; Function EmptyClipboard:boolean; external 'EmptyClipboard@user32.dll std

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 26 Days 20 Hours ago by: Jim S

Yes. I was initially plonking by subject and seperately by name using the built in Plonk Rule and Subject-Plonk Rule repectively. I got fed up with being asked every time and you came to my rescue. I vaguelly remember plonking by name an

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 26 Days 21 Hours ago by: Bernd Rose

^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^ Not entirely. ;-) I marked the relevant differences above. Originally, you wanted to be able to alternatively plonk on name (= first script) as well as on subject (= second scr

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 27 Days 5 Hours ago by: Jim S

Follow-up Apart from their names aren't these two scripts identical?

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 27 Days 14 Hours ago by: Jim S

Thanks again guru

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 27 Days 18 Hours ago by: Bernd Rose

Hiding on status 'read' hampers access to articles already read, but still containing worthwhile information. Therefore, status 'ignore' usually is preferred as hiding pointer. But depending on your pre-defined default plonk-rule either

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 27 Days 19 Hours ago by: Jim S

Ah! My default view is to hide 'read' messages.

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 27 Days 21 Hours ago by: Bernd Rose

[40tude Dialog: 2 Scripts to plonk without confirmation dialog] IMHO, we already talked about this in this very thread. Please take a look at my altered versions of the scripts from 2021-04-19 (18:42): Message-ID: <1fevaouhkj7bx.dlg@b

Re: Newsreaders eh? (thread)

news.software.readers

Posted: 28 Days ago by: Jim S

Hi Bernd I finally plucked up the courage to do these scripts (53 weeks after) Of course it works a treat, but I would quite like it to delete the header at the same time. Currently I have to read the article and them - 'show only unrea

80 recent articles found.

rocksolid light 0.7.2
clearneti2ptor