Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  newsreader  login

"Turn on, tune up, rock out." -- Billy Gibbons


devel / comp.security.ssh / Change Login Request For Password??

SubjectAuthor
* Change Login Request For Password??NotReal
`* Re: Change Login Request For Password??William Unruh
 +- Re: Change Login Request For Password??NotReal
 `* Re: Change Login Request For Password??NotReal
  `* Re: Change Login Request For Password??William Unruh
   `- Re: Change Login Request For Password??NotReal

1
Change Login Request For Password??
  comp.security.ssh
Path: i2pn2.org!i2pn.org!eternal-september.org!reader02.eternal-september.org!.POSTED!not-for-mail
From: NotR...@NoSpam.com (NotReal)
Newsgroups: comp.security.ssh
Subject: Change Login Request For Password??
Date: Sat, 22 Jan 2022 16:53:30 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 17
Message-ID: <sshcqa$j0$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Injection-Date: Sat, 22 Jan 2022 16:53:30 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="f2c3f3a27a2b52dcfd78feaedf7d0765";
logging-data="608"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX18CqFV8EV8JRX6Uc9ivV0e7sipXJcZwJ/A="
User-Agent: XanaNews/1.19.1.320
Cancel-Lock: sha1:2bL5evfv8kcIAj8L8VW2DBdE47E=
X-Antivirus-Status: Clean
X-Antivirus: Avast (VPS 220122-2, 01/22/2022), Outbound message
Xref: rslight2 comp.security.ssh:259
 by: NotReal - Sat, 22 Jan 2022 16:53 UTC

On my server with SSH, when a user logs in and enters a user name, the
response is

user_name@xxx.xxx.xxx.xxx’s password:

Is it possible to customize the response after “@”? At the very
least, can it be configured to show

user_name@server_name

I would prefer that the IP address is not in the response.

I have looked at the man pages, but if I missed that section, my
apologies. I did find how to add a banner, but not how to change the
actual query for the password.

Re: Change Login Request For Password??
  comp.security.ssh
Path: i2pn2.org!i2pn.org!eternal-september.org!reader02.eternal-september.org!.POSTED!not-for-mail
From: unr...@invalid.ca (William Unruh)
Newsgroups: comp.security.ssh
Subject: Re: Change Login Request For Password??
Date: Sat, 22 Jan 2022 17:19:00 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 22
Message-ID: <sshea4$8uv$1@dont-email.me>
References: <sshcqa$j0$1@dont-email.me>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf8
Content-Transfer-Encoding: 8bit
Injection-Date: Sat, 22 Jan 2022 17:19:00 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="1db44b7c581385f4908a30fa7f81d8d7";
logging-data="9183"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX19xzYwV4d4tlL/uhvyjreyL"
User-Agent: slrn/1.0.3 (Linux)
Cancel-Lock: sha1:lCYv8lnho5GkjXJTpuOCPpM4aqM=
Xref: rslight2 comp.security.ssh:260
 by: William Unruh - Sat, 22 Jan 2022 17:19 UTC

I don't think that has anything to do with ssh, but is the system's
password prompt.
for me when logging in with ssh, I just get Password:

On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
> On my server with SSH, when a user logs in and enters a user name, the
> response is
>
> user_name@xxx.xxx.xxx.xxx’s password:
>
> Is it possible to customize the response after “@”? At the very
> least, can it be configured to show
>
> user_name@server_name
>
> I would prefer that the IP address is not in the response.
>
> I have looked at the man pages, but if I missed that section, my
> apologies. I did find how to add a banner, but not how to change the
> actual query for the password.
>
>

Re: Change Login Request For Password??
  comp.security.ssh
Path: i2pn2.org!i2pn.org!eternal-september.org!reader02.eternal-september.org!.POSTED!not-for-mail
From: NotR...@NoSpam.com (NotReal)
Newsgroups: comp.security.ssh
Subject: Re: Change Login Request For Password??
Date: Sat, 22 Jan 2022 17:24:22 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 27
Message-ID: <sshek6$dk1$1@dont-email.me>
References: <sshcqa$j0$1@dont-email.me> <sshea4$8uv$1@dont-email.me>
Injection-Date: Sat, 22 Jan 2022 17:24:22 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="f2c3f3a27a2b52dcfd78feaedf7d0765";
logging-data="13953"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1+Gi4gI1KdfyH2dmuQHRm88yVnA2I9ig08="
User-Agent: XanaNews/1.19.1.320
Cancel-Lock: sha1:FXJwZqLWhKnTAKEcxAj3jznsozI=
X-Antivirus-Status: Clean
X-Antivirus: Avast (VPS 220122-2, 01/22/2022), Outbound message
Xref: rslight2 comp.security.ssh:261
 by: NotReal - Sat, 22 Jan 2022 17:24 UTC

William Unruh wrote:

> I don't think that has anything to do with ssh, but is the system's
> password prompt.
> for me when logging in with ssh, I just get Password:
>
> On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
> > On my server with SSH, when a user logs in and enters a user name,
> > the response is
> >
> > user_name@xxx.xxx.xxx.xxxBs password:
> >
> > Is it possible to customize the response after B@B? At the
> > very least, can it be configured to show
> >
> > user_name@server_name
> >
> > I would prefer that the IP address is not in the response.
> >
> > I have looked at the man pages, but if I missed that section, my
> > apologies. I did find how to add a banner, but not how to change
> > the actual query for the password.
> >
> >

Interesting. I had never considered that. You have given me another
possibility to consider and look into. Thanks.

Re: Change Login Request For Password??
  comp.security.ssh
Path: i2pn2.org!i2pn.org!eternal-september.org!reader02.eternal-september.org!.POSTED!not-for-mail
From: NotR...@NoSpam.com (NotReal)
Newsgroups: comp.security.ssh
Subject: Re: Change Login Request For Password??
Date: Sat, 22 Jan 2022 21:51:52 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 36
Message-ID: <sshu9o$t60$1@dont-email.me>
References: <sshcqa$j0$1@dont-email.me> <sshea4$8uv$1@dont-email.me>
Injection-Date: Sat, 22 Jan 2022 21:51:52 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="f2c3f3a27a2b52dcfd78feaedf7d0765";
logging-data="29888"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/BoTYvT1lgh5yDv8Dz1MCUlBoKEd912nY="
User-Agent: XanaNews/1.19.1.320
Cancel-Lock: sha1:uX+bFisOsmRq7Fo9uW/UFqxPdjc=
X-Antivirus-Status: Clean
X-Antivirus: Avast (VPS 220122-4, 01/22/2022), Outbound message
Xref: rslight2 comp.security.ssh:262
 by: NotReal - Sat, 22 Jan 2022 21:51 UTC

William Unruh wrote:

> I don't think that has anything to do with ssh, but is the system's
> password prompt.
> for me when logging in with ssh, I just get Password:
>
> On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
> > On my server with SSH, when a user logs in and enters a user name,
> > the response is
> >
> > user_name@xxx.xxx.xxx.xxxBs password:
> >
> > Is it possible to customize the response after B@B? At the
> > very least, can it be configured to show
> >
> > user_name@server_name
> >
> > I would prefer that the IP address is not in the response.
> >
> > I have looked at the man pages, but if I missed that section, my
> > apologies. I did find how to add a banner, but not how to change
> > the actual query for the password.
> >
> >

After doing some research with your comment in mind because it was a
good thought, I made some interesting discoveries. It turns out that
that ssh is only echoing back what I put in. If I use "ssh -l username
xxx.xxx.xxx.xxx" to login on anther server, I received
"username@xxx.xxx.xxx.xxx's password:". On the other hand, if I used
"ssh -l username hostname", I received "username@hostame's password:"
It also appears to be true if I use Putty from a Windows PC

That is fine with me, so I guess I am all set. I was only concerned
that my server was revealing information to the outside world about my
internal network. Thanks for your help.

Re: Change Login Request For Password??
  comp.security.ssh
Path: i2pn2.org!i2pn.org!eternal-september.org!reader02.eternal-september.org!.POSTED!not-for-mail
From: unr...@invalid.ca (William Unruh)
Newsgroups: comp.security.ssh
Subject: Re: Change Login Request For Password??
Date: Sat, 22 Jan 2022 21:57:36 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 44
Message-ID: <sshukf$ter$1@dont-email.me>
References: <sshcqa$j0$1@dont-email.me> <sshea4$8uv$1@dont-email.me>
<sshu9o$t60$1@dont-email.me>
Injection-Date: Sat, 22 Jan 2022 21:57:36 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="1db44b7c581385f4908a30fa7f81d8d7";
logging-data="30171"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/yHAmHF+IKW6V0txLYlJ7o"
User-Agent: slrn/1.0.3 (Linux)
Cancel-Lock: sha1:w7KgGgFZPx/47DSDNSwYTy+hVLw=
Xref: rslight2 comp.security.ssh:263
 by: William Unruh - Sat, 22 Jan 2022 21:57 UTC

As I said, I get
Password:
nomatter what I enter on the ssh line

You do not say what operating system you are using. Windows, Mac,
Linux,.... on the two machines.

On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
> William Unruh wrote:
>
>> I don't think that has anything to do with ssh, but is the system's
>> password prompt.
>> for me when logging in with ssh, I just get Password:
>>
>> On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
>> > On my server with SSH, when a user logs in and enters a user name,
>> > the response is
>> >
>> > user_name@xxx.xxx.xxx.xxxBs password:
>> >
>> > Is it possible to customize the response after B@B? At the
>> > very least, can it be configured to show
>> >
>> > user_name@server_name
>> >
>> > I would prefer that the IP address is not in the response.
>> >
>> > I have looked at the man pages, but if I missed that section, my
>> > apologies. I did find how to add a banner, but not how to change
>> > the actual query for the password.
>> >
>> >
>
> After doing some research with your comment in mind because it was a
> good thought, I made some interesting discoveries. It turns out that
> that ssh is only echoing back what I put in. If I use "ssh -l username
> xxx.xxx.xxx.xxx" to login on anther server, I received
> "username@xxx.xxx.xxx.xxx's password:". On the other hand, if I used
> "ssh -l username hostname", I received "username@hostame's password:"
> It also appears to be true if I use Putty from a Windows PC
>
> That is fine with me, so I guess I am all set. I was only concerned
> that my server was revealing information to the outside world about my
> internal network. Thanks for your help.

Re: Change Login Request For Password??
  comp.security.ssh
Path: i2pn2.org!i2pn.org!eternal-september.org!reader02.eternal-september.org!.POSTED!not-for-mail
From: NotR...@NoSpam.com (NotReal)
Newsgroups: comp.security.ssh
Subject: Re: Change Login Request For Password??
Date: Sun, 23 Jan 2022 03:47:23 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 56
Message-ID: <ssij4b$hnp$1@dont-email.me>
References: <sshcqa$j0$1@dont-email.me> <sshea4$8uv$1@dont-email.me> <sshu9o$t60$1@dont-email.me> <sshukf$ter$1@dont-email.me>
Injection-Date: Sun, 23 Jan 2022 03:47:23 -0000 (UTC)
Injection-Info: reader02.eternal-september.org; posting-host="8e20bdf6fa8ef9266bffd3b0ea5795a0";
logging-data="18169"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/4a6E7/N93pXphTQIT5gcwkE5YP2nFUYk="
User-Agent: XanaNews/1.19.1.320
Cancel-Lock: sha1:4k7/dodi4ddQY5kbEnphVYyO1wo=
X-Antivirus-Status: Clean
X-Antivirus: Avast (VPS 220122-4, 01/22/2022), Outbound message
Xref: rslight2 comp.security.ssh:264
 by: NotReal - Sun, 23 Jan 2022 03:47 UTC

William Unruh wrote:

> As I said, I get
> Password:
> nomatter what I enter on the ssh line
>
> You do not say what operating system you are using. Windows, Mac,
> Linux,.... on the two machines.

My main servers are Slackware but I also have a Pi with Raspbian for a
honeypot along with various window versions as desktops. I tried
different combinations and the results were all the same as I described
in my last post.

>
> On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
> > William Unruh wrote:
> >
> >> I don't think that has anything to do with ssh, but is the system's
> >> password prompt.
> >> for me when logging in with ssh, I just get Password:
> >>
> >> On 2022-01-22, NotReal <NotReal@NoSpam.com> wrote:
> >> > On my server with SSH, when a user logs in and enters a user
> name, >> > the response is
> >> >
> >> > user_name@xxx.xxx.xxx.xxxBs password:
> >> >
> >> > Is it possible to customize the response after B@B? At the
> >> > very least, can it be configured to show
> >> >
> >> > user_name@server_name
> >> >
> >> > I would prefer that the IP address is not in the response.
> >> >
> >> > I have looked at the man pages, but if I missed that section, my
> >> > apologies. I did find how to add a banner, but not how to change
> >> > the actual query for the password.
> >> >
> >> >
> >
> > After doing some research with your comment in mind because it was a
> > good thought, I made some interesting discoveries. It turns out
> > that that ssh is only echoing back what I put in. If I use "ssh -l
> > username xxx.xxx.xxx.xxx" to login on anther server, I received
> > "username@xxx.xxx.xxx.xxx's password:". On the other hand, if I
> > used "ssh -l username hostname", I received "username@hostame's
> > password:" It also appears to be true if I use Putty from a Windows
> > PC
> >
> > That is fine with me, so I guess I am all set. I was only concerned
> > that my server was revealing information to the outside world about
> > my internal network. Thanks for your help.

1
server_pubkey.txt

rocksolid light 0.9.1
clearnet tor