Message-ID:

Not only is UNIX dead, it's starting to smell really bad. -- Rob Pike

tech / sci.electronics.design / Help identifying connector

Help identifying connector

<UdLDK.54141$mY1.6558@fx01.iad>

https://www.novabbs.com/tech/article-flat.php?id=102331&group=sci.electronics.design#102331

copy link Newsgroups: sci.electronics.components sci.electronics.design
Followup: sci.electronics.components,sci.electronics.design

Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer03.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx01.iad.POSTED!not-for-mail
From: moc...@mailexcite.com (Mike Mocha)
Subject: Help identifying connector
Newsgroups: sci.electronics.components,sci.electronics.design
Followup-To: sci.electronics.components,sci.electronics.design
X-Face: $U`Uhy}9baNge-Vz>P*B?Kz''{nI8:v8([FP0v!x|*5U!g!A5Mhl3J\[-\6x(l<Y
5~\q23I
c>%!R)QksWH#{/2_/j'7N\"J`*Z$5AVkVkv_K5tk|@k_)(6Fz\ZsxhTEkSLeo1
nsu7\Z J;aIwiq%k=Q<',|&V+lJc({~zA8fx=63iKrI#bNO+$'1;0b=90/a6
zwIO)B0_(KJg#}^b$Z}rxT=3=
MIME-Version: 1.0
Organization: --==RHW==--
x-no-archive: yes
User-Agent: Pan/0.150 (Moucherotte; 4c6043e)
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Lines: 14
Message-ID: <UdLDK.54141$mY1.6558@fx01.iad>
X-Complaints-To: abuse@frugalusenet.com
NNTP-Posting-Date: Tue, 26 Jul 2022 05:47:32 UTC
Date: Tue, 26 Jul 2022 05:47:32 GMT
X-Received-Bytes: 1405

by: Mike Mocha - Tue, 26 Jul 2022 05:47 UTC

Hey all,

I need some help to identify the manufacturer of the "DIAG" connector
shown in the imgur link. I've done a lot of searching on Digikey, Mouser,
etc, and I'm not having any luck. The pin pitch looks to be about 2.5
mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire
to a serial port for use with a terminal emulator. If someone could just
give a clue on the OEM I can do the rest. Thanks for any help!

https://imgur.com/a/9yGEPXR

Re: Help identifying connector

<jka0tnFej4dU1@mid.individual.net>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=102337&group=sci.electronics.design#102337

copy link Newsgroups: sci.electronics.components sci.electronics.design

Path: i2pn2.org!i2pn.org!weretis.net!feeder8.news.weretis.net!news.mixmin.net!news2.arglkargh.de!news.karotte.org!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail
From: chri...@privacy.net (ChrisND@privacy.net)
Newsgroups: sci.electronics.components,sci.electronics.design
Subject: Re: Help identifying connector
Date: Tue, 26 Jul 2022 12:19:18 +0100
Lines: 18
Message-ID: <jka0tnFej4dU1@mid.individual.net>
References: <UdLDK.54141$mY1.6558@fx01.iad>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
X-Trace: individual.net dTJCgrwpuetYx2hz9mSSIQUM9GEP3RGkRN69pHtc1XPEpBhLHz
Cancel-Lock: sha1://LvherIZ+9YuSbwtX4QzLapF3g=
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
Thunderbird/91.11.0
Content-Language: en-GB
In-Reply-To: <UdLDK.54141$mY1.6558@fx01.iad>

by: ChrisND@privacy.net - Tue, 26 Jul 2022 11:19 UTC

On 26/07/2022 06:47, Mike Mocha wrote:
>
> Hey all,
>
> I need some help to identify the manufacturer of the "DIAG" connector
> shown in the imgur link. I've done a lot of searching on Digikey, Mouser,
> etc, and I'm not having any luck. The pin pitch looks to be about 2.5
> mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire
> to a serial port for use with a terminal emulator. If someone could just
> give a clue on the OEM I can do the rest. Thanks for any help!
>
>
> https://imgur.com/a/9yGEPXR

If you end up stuck, I would try three sections off a standard double
2.5mm pin header...
Chris

Re: Help identifying connector

<slrntdvkje.hjh.dan@djph.net>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=102338&group=sci.electronics.design#102338

copy link Newsgroups: sci.electronics.components sci.electronics.design
Followup: sci.electronics.components

Path: i2pn2.org!i2pn.org!eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: dan...@djph.net (Dan Purgert)
Newsgroups: sci.electronics.components,sci.electronics.design
Subject: Re: Help identifying connector
Followup-To: sci.electronics.components
Date: Tue, 26 Jul 2022 11:39:03 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 48
Message-ID: <slrntdvkje.hjh.dan@djph.net>
References: <UdLDK.54141$mY1.6558@fx01.iad> <jka0tnFej4dU1@mid.individual.net>
Injection-Date: Tue, 26 Jul 2022 11:39:03 -0000 (UTC)
Injection-Info: reader01.eternal-september.org; posting-host="41e85aa1fd7a3f485cec9502620bcc0f";
logging-data="2040830"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/sJOB6l2ZHI7fZ/xv9fEnKG3QB0H93j1I="
User-Agent: slrn/1.0.3 (Linux)
Cancel-Lock: sha1:2+XgA/edJhC76C8/w8tsnPZqDdw=
X-PGP-KeyID: 0x4CE72860

by: Dan Purgert - Tue, 26 Jul 2022 11:39 UTC

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

["Followup-To:" header set to sci.electronics.components.]
ChrisND@privacy.net wrote:
> On 26/07/2022 06:47, Mike Mocha wrote:
>>
>> Hey all,
>>
>> I need some help to identify the manufacturer of the "DIAG" connector
>> shown in the imgur link. I've done a lot of searching on Digikey, Mouser,
>> etc, and I'm not having any luck. The pin pitch looks to be about 2.5
>> mm. The inside dimensions are about 7.75 mm by 6.1 mm. These pins wire
>> to a serial port for use with a terminal emulator. If someone could just
>> give a clue on the OEM I can do the rest. Thanks for any help!
>>
>>
>> https://imgur.com/a/9yGEPXR
>
> If you end up stuck, I would try three sections off a standard double
> 2.5mm pin header...
> Chris

looks like a pretty "standard" shrouded 2x3-pin header. Might be
intended to plug into a keyed IDC connector for a ribbon cable?

-----BEGIN PGP SIGNATURE-----
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=nKnE
-----END PGP SIGNATURE-----

--
|_|O|_|
|_|_|O| Github: https://github.com/dpurgert
|O|O|O| PGP: DDAB 23FB 19FA 7D85 1CC1 E067 6D65 70E5 4CE7 2860

Re: Help identifying connector

<1121844f-7c61-4381-a09f-a4fbf6ce44fdn@googlegroups.com>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=102340&group=sci.electronics.design#102340

copy link Newsgroups: sci.electronics.design

X-Received: by 2002:a0c:c448:0:b0:473:efea:483f with SMTP id t8-20020a0cc448000000b00473efea483fmr14138962qvi.3.1658836212144;
Tue, 26 Jul 2022 04:50:12 -0700 (PDT)
X-Received: by 2002:a81:5d05:0:b0:31c:e010:fbc with SMTP id
r5-20020a815d05000000b0031ce0100fbcmr14267494ywb.381.1658836211993; Tue, 26
Jul 2022 04:50:11 -0700 (PDT)
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer03.iad!feed-me.highwinds-media.com!news.highwinds-media.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: sci.electronics.design
Date: Tue, 26 Jul 2022 04:50:11 -0700 (PDT)
In-Reply-To: <jka0tnFej4dU1@mid.individual.net>
Injection-Info: google-groups.googlegroups.com; posting-host=130.225.196.250; posting-account=mW5JKwkAAAAMyuWOVeLp8yffyAkVx0g7
NNTP-Posting-Host: 130.225.196.250
References: <UdLDK.54141$mY1.6558@fx01.iad> <jka0tnFej4dU1@mid.individual.net>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <1121844f-7c61-4381-a09f-a4fbf6ce44fdn@googlegroups.com>
Subject: Re: Help identifying connector
From: langw...@fonz.dk (Lasse Langwadt Christensen)
Injection-Date: Tue, 26 Jul 2022 11:50:12 +0000
Content-Type: text/plain; charset="UTF-8"
X-Received-Bytes: 1202

by: Lasse Langwadt Chris - Tue, 26 Jul 2022 11:50 UTC

https://www.molex.com/molex/products/part-detail/pcb_headers/0901301106

Re: Help identifying connector

<S6WDK.96540$dh2.45469@fx46.iad>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=102369&group=sci.electronics.design#102369

copy link Newsgroups: sci.electronics.components sci.electronics.design
Followup: sci.electronics.components,sci.electronics.design

Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer02.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx46.iad.POSTED!not-for-mail
From: moc...@mailexcite.com (Mike Mocha)
Subject: Re: Help identifying connector
Newsgroups: sci.electronics.components,sci.electronics.design
Followup-To: sci.electronics.components,sci.electronics.design
X-Face: $U`Uhy}9baNge-Vz>P*B?Kz''{nI8:v8([FP0v!x|*5U!g!A5Mhl3J\[-\6x(l<Y
5~\q23I
c>%!R)QksWH#{/2_/j'7N\"J`*Z$5AVkVkv_K5tk|@k_)(6Fz\ZsxhTEkSLeo1
nsu7\Z J;aIwiq%k=Q<',|&V+lJc({~zA8fx=63iKrI#bNO+$'1;0b=90/a6
zwIO)B0_(KJg#}^b$Z}rxT=3=
References: <UdLDK.54141$mY1.6558@fx01.iad>
<jka0tnFej4dU1@mid.individual.net>
<1121844f-7c61-4381-a09f-a4fbf6ce44fdn@googlegroups.com>
MIME-Version: 1.0
Organization: --==RHW==--
x-no-archive: yes
User-Agent: Pan/0.150 (Moucherotte; 4c6043e)
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Lines: 3
Message-ID: <S6WDK.96540$dh2.45469@fx46.iad>
X-Complaints-To: abuse@frugalusenet.com
NNTP-Posting-Date: Tue, 26 Jul 2022 18:10:58 UTC
Date: Tue, 26 Jul 2022 18:10:58 GMT
X-Received-Bytes: 1213

by: Mike Mocha - Tue, 26 Jul 2022 18:10 UTC

Subject	Author
Help identifying connector	Mike Mocha
Re: Help identifying connector	ChrisND@privacy.net
Re: Help identifying connector	Dan Purgert
Re: Help identifying connector	Lasse Langwadt Christensen
Re: Help identifying connector	Mike Mocha