0.5 *1 *2: Using the calculator you only get ..You don't know what if 1m^2 =100i^2, or..1m^3 =1000i^3.
Only. if you understand that 3 factors.. produce Volumes you know that..in the case..it is 1m^3. =1000 liters.

The T.d.i. is: It does not happen at the start..since .1liter =0.001m^3 ... but that no Mathematician.
He specifies it by saying 0.001 and that's it. So blessed are those who understand the difference between 1 liter and 1 millimeter.

To have a True logic I created the Small Neutral Theory = T.n.p. so I can't go wrong:
======= T.d.i. ============== T.n..p.
=> 0.1 *1 = 0.1=====> 1i *10i ======10i^2 = 0.1m^2
0.1 *1 *1 = 0.1 =====>1i *10i *10i = 100i^3 = 0.1m^3

Saluti da Socratis T.n.p. 5^2+7^2 =10*7 +2^2 = 74m^2.... 2√74 = 8.6023..
=====> 5^3+7^3 =12 *(7*5 +2^2) =12*39m^2 = 468m^3...3√468=7.7639..

Why not T.T.L. ?

Socratis T.n.p. kirjutas Esmaspäev, 25. juuli 2022 kl 11:49:34 UTC+2:
> 0.5 *1 *2: Using the calculator you only get ..You don't know what if 1m^2 =100i^2, or..1m^3 =1000i^3.
> Only. if you understand that 3 factors.. produce Volumes you know that..in the case..it is 1m^3. =1000 liters.
>
> The T.d.i. is: It does not happen at the start..since .1liter =0.001m^3 .. but that no Mathematician.
> He specifies it by saying 0.001 and that's it. So blessed are those who understand the difference between 1 liter and 1 millimeter.
>
> To have a True logic I created the Small Neutral Theory = T.n.p. so I can't go wrong:
> ======= T.d.i. ============== T..n.p.
> => 0.1 *1 = 0.1=====> 1i *10i ======10i^2 = 0..1m^2
> 0.1 *1 *1 = 0.1 =====>1i *10i *10i = 100i^3 = 0.1m^3
>
> Saluti da Socratis T.n.p. 5^2+7^2 =10*7 +2^2 = 74m^2.... 2√74 = 8.6023..
> =====> 5^3+7^3 =12 *(7*5 +2^2) =12*39m^2 = 468m^3...3√468=7.7639..

The problem lies in starting from 1..which instead must be 10i = 100c = 1000 •.
So No Prof.. understands the system he uses, manipulating and making everything wrong.
Ex. If you say 1dm *10dm ...You can't say that he does 1dm...in fact 1i *10i = 10i^2 = 0.1m^2...

Therefore 10i =1m..and also Neutral.. means that nothing is correct..boundary and integral functions..included ..
How much should 1m/x-> 1• ..if not 1000mm = 1m?
How much should 1dm *10m do If not 1i *100i = 100i^2 => for 10/1i = 100i.

If you wanted to go deeper .. know that I have found many flaws, being an Intelligent Researcher..That before
creating the T.n.p. He has been searching and meditating for about 15 years, discovering many Arcana.. useful
to make math clear to all humans who Spit en masse on Mat. Standard.

If you ask me the reason for so many errors, I tell you that they derive from a great set-up defect that ..
It should be eradicated ... By Intelligent Men and not by Monkeys who do not know the system they use.
The Profs..have already understood..But they cannot admit that they have studied a life, to Make It All Wrong.

Try saying 1c *1i *1 and translate to: 1c *10c *100c = 1000cm^3 = 1000g = 1.kg.
Now do the same thing with the T.d.i. : 0.01 *0.1 *1 = 0.001 = 1mm. The reason is deduced from the
derivativity of small volumes T.d.i..from m^3..which Mathematicians have deleted...to say 10c*10c =1c.

In fact..for them: 0.1 *0.1 = 0.01m. which is wrong..because 0.1 *0.1 =100c^2 =0.01m^2..which They Ignore.
The T.n.p. find any small volume directly, using true Small numbers. 1• ..1c..1i..10i..etc.
Understandable from the fact that the integers are nothing but tens of dm, hundreds of cm, thousands of mm.

Thank you for answering me, which gives me the opportunity to give the World the True Mathematical Logic.- :)))
The fact of being evaluated by Laureti ... depends on Your Trust in the Profs who are True Idiots ... Monkeys.
Who do not know the Logic of the System they use. In reality, the idiots would have to use the T.n.p.

Unfortunately ... Those who have never understood the T.d.i. They think it would be their fault… while there
The real fault lies with the Profs who have never known or explained The True Logic of the system they teach.
Trust me… because I know perfectly… the two theories… while Laureti should correct his logic.

Greetings from Socratis ==> (7 +9)^2 = 14*18 + 2^2 = 256m^2.

Monday July 25, 2022 at 15:31:10 UTC+2 Erte Ribbile wrote:
> So if I quickly get 0.5 EUR to 1 guy twice, he has to give me back 1
> liter? Drop the bottle.

Read and meditate: There are 2 = 20i..2i =2i..2c = 2c...2• = 2mm.
So 10i/2i = 5i ==> 5i * 2i = 10i... Geometrically... 10i^2.
If you lend 5i € * 2i times..you must receive 10i € ==> that 1/0.1 = 10i.. No I say it, but the calculator ..
If I wanted to figure it out, it works considering DMs... as Bases for all the so-called Wholes

If 1dm = (10c)^3 = The liter... the liter which derives from .0.1^3 = 0.001m^3, we must meditate... on the non-logical
which follows .. and do not pretend .. that mathematics deals only with n.€.
The math first produces m^2 and m^3, the rest you have to define and see in terms of the dm.

If you say 5i * 2 ..... you say 5i * 20i = 100i^2 ====== 1m^2 .. And not a miserable 1Linear
If you say 5i * 1 * 2, you say 5i *10i *20i = 1000i^3 = 1m^3. And nothing else miserable 1. Linear
If you say 1i * 1 * 1, you say 1i * 10i * 10i = 100i^3 = 0.1m^3. And no other miserable 0.1 = 1dm

In mathematics, the liter is a quantity of three-dimensional space-
and 1kg = quantity of weight..that is 1c^3 = both 1ml, and both one mg, = 1g.
You could never say 1hg * 10hg = 1hg.
It will therefore be necessary to say ==> 1hg * 1kg == 1kg = 10hg..

This is one of my Laws: small * Large = Gf (p).
I...inform you...that 1hg *1kg...is valid for T.d.i..0.0001 *0.001 = 0.0000001..
What are the same idiots who think that 100m^2 * 0.1 = 10m^2 .. and not 10m^3.
In fact..Yes; 10i *1000i = 10'000i^2 = 100m^2 .. 1i *10i *1000i = 10'000i^3 = 10m^3 ..

This is quite normal since to make 1m^3 it takes 10m^2 for z=1dm.
I remind you that I like logic, but I understand that it is necessary to explain to intelligent people that
that's why they never understood Mat. Modified by the so-called .. Prof. Scimie.
So trust and learn the T.n.p. which allows you to understand the T.d.i.- :))

Greetings from Socratis 1.5 *3 *6 = 3^3 = 27m^3.
===================> 2 *4 *8 = 4^3 = 64m^3,

Se dico 5i *3.....sto dicendo 5i *30i = 150i^2 ====== 1.5m^2... E non un miserabile 1.5..Lineare
Se dico 5i *1 *3 sto dicendo 5i *10i *30i = 1500i^3 = 1.5m^3. E Non un miserabile 1.5..Lineare
Se dico 1i *2 *2 sto dicendo 1i *20i *20i = 400i^3 = 0.4m^3. E Non un miserabile 0.4= 4dm.Lin.

Coma la mettiamo con 1kg. *1kg ?
Semplice ; =========10hg. *10hg. = 100hg. = 10kg-
Diventa normale =====> 1hg *100hg =100hg =10kg-

Beati Coloro che sanno che la Matematica deve cominciare... dal piccolo..
dire 1i *1volta, Non ha un senso Matematico. in quanto 1i, è già...se stesso
senza bisogno di essere moltiplicato per qualcosa : per potere...esistere.

Per fare buona Matematica, ci vuole Chiarezza, e non posso dire impunemente
5i *10i = 5i..altrimenti creo confusione, per i miei allievi, infatti 5i *10i = 50i^2 = 0.5m^2.
Nè possono esistere numeri privi di dimensioni e privi della Misura di riferimento ..
poiché 0.5m^2 è un numero definito.e distinto .da 0.5m^3...Anche se basta 50i^2 e 50i^3
=> 5i * 100i = 500i^2
1i *5i *100i = 500i^3

Come dire che un dm. basta a modificare L'area in dm^3. che non dipendono dal m^3..
Come i dm^2 bastano a definire le aree..in dm^2...che non dipendano dal m^2..
Per farlo è necessario che 1 sia nominato per quello che è Veramente cioè 10dm = 10i.

Insomma.. esistono 1•...1c, 1i, 10i..11i..15i..20i..100i..1000i..ecc. Quindi :
1i *10i *100i vale indiscutibilmente 1000i^3..mentre..
=> 10i *100i = 1000i^2 = 10m^2...,e a questo punto il m^2 può..anche.. Non esistere..
Anzi..Ci...eviterebbe..di Sbagliare..considerando... 10m^2 >> 1000i^3...che è Falso.

Ma ..Cari matematici..come fate a Pensare che 1m sia piccolo a tal punto da essere
Neutro nei confronti di 1dm ? Non Capite.. in che senso vale come Finto Neutro ??..Ve lo
spiego.. la T.d.i.. diventa Derivativa.da m^2 e m^3. .In quanto Utilizza il m^2 e il m^3...

...per calcolare e definire : quadrati e Volumi piccoli Tipo 1dm*1dm = 100c^2 = 0.01m^2..
Che unito al negare il m^2 resterà per sempre che 100c^2 = 1cm = 0..01 di 1m = 1c. ?? Il che..
...vuol dire che un prodotto...si permette di essere un quoto.di una Divisione : 100c/100c = 1c.

Osserva :
0.1 *0.1 *0.1 = 0.001m^3 = 1Litro Alias 1dm^3..che non puoi negare.
0.1 * 0.1 * 1 = 0.01m^3 =10-Litri Alias 1i*1i *10i = 10i^3
0.1 * 1 * 1 = 0.1m^3 = 100. Litri. Alias 1i *10i *10i = 100i^3

..Cosa potrebbe produrre : 10i *10i *10i se non 1000i^3 ???
E, magari 100c *100c *100c = 1'000'000c^3 = 1000i^3...Neghi anche questo ??
Se Non puoi, vuol dire che sei in palese... contraddizione.ed Errore..Grave....

Ma se 1 fosse neutro..come fareste a dire 1*10 = 10m^2 ? E 1i *10i *100i = 1 di cosa ??
Se 1dm *100dm = 100dm^2 ==> 1i *10i *100i = 1000i^3..o.. No ?
Alla fine, non fate altro che ingannare Voi Stessi..per Truccare I conti-:)))

Vi conviene sciogliere 1neutro.. e chiamarlo, per quello che è..cioè ...10i. =100c =1000•.
Il Perché è semplice.. 1neutro Non serve. 10i è Utilissimo e ti impedisce di sbagliare.. Per..
quanto riguarda 1mela *1mela..potete dire => 1c*2c*10c =20c^3 = 20g....ecc.
Se non bastasse : 1c *1i *1i = 100c^3 = 100c^3 = 1hg

Saluti da Socratis e T.n.p. Il sistema diretto...preferito da Intelligenti. e Responsabili.
a^3 +b^3 = (a+b)* (a*b +d^2) ==> 6^3 + 9^3 = 15 * (54 +9) = 15 *63m^2 = 945m^3

======= T.d.i. ===========T.n.p. ==============
1 * 1 * 1 =======1m^3 ==> 10i *10i *10i = 1000i^3
0.1 *1 *1 ====== 0.1m^3 ==> 10i *10i * 1i = 100i^3
0.1*0.1* 1======0.01m^3 ==>10i * 1i * 1i = 10i^3
0.1*01*0.1===== 0.001m^3 ==> 1i * 1i *1i = 1.kg.
0.01*0.1*0.1====0.0001m^3 ==>1c *1i *1i=1hg.
0.01*0.01*0.1===0.00001m^3 ==>1c *1c*10c = 10c^3=10g
0.01 *0.01*0.01= 0.000001m^3 ==> 1c *1c *1c = 1c^3 =1g.
0.001*( 0,01)^2 = 0.0000001m^3 ==> 1• *1c *1c = 100mg.
(0.001)^2 *0.01 = 0.00000001m^3 ==> 1• *1• *1c = 10mg.
(0.001)^3 ====== 0.000000001m^3 ==> 1• *1• *1• = 1mg.
Socratis e T.n.p. 9^3 +11^3 =20 *(9*11 +2^2) = 2060m^3