Re: soft-start blunder

Subject	Author
soft-start blunder	John Larkin
Re: soft-start blunder	Fred Bloggs
Re: soft-start blunder	piglet
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Mike Monett VE3BTI
Re: soft-start blunder	Mike Monett VE3BTI
Re: soft-start blunder	Fred Bloggs
Re: soft-start blunder	John Larkin
Re: soft-start blunder	boB
Re: soft-start blunder	John Larkin
Re: soft-start blunder	legg
Re: soft-start blunder	John Miles, KE5FX
Re: soft-start blunder	John Larkin
Re: soft-start blunder	John Miles, KE5FX
Re: soft-start blunder	Klaus Vestergaard Kragelund
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Lasse Langwadt Christensen
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Lasse Langwadt Christensen
Re: soft-start blunder	Klaus Vestergaard Kragelund
Re: soft-start blunder	legg
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Lasse Langwadt Christensen
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Jan Panteltje
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Jan Panteltje
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Jan Panteltje
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Jan Panteltje
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Jan Panteltje
Re: soft-start blunder	John Walliker
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Don
Re: soft-start blunder	Jan Panteltje
Re: soft-start blunder	Phil Hobbs
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Phil Hobbs
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Don
Re: soft-start blunder	John Larkin
Re: soft-start blunder	Mega WeedMarket
Re: soft-start blunder	piglet
Re: soft-start blunder	Jasen Betts
Re: soft-start blunder	John Larkin
Re: soft-start blunder	legg
Re: soft-start blunder	John Larkin
Re: soft-start blunder	legg
Re: soft-start blunder	legg
Re: soft-start blunder	John Larkin
Re: soft-start blunder	legg
Re: soft-start blunder	John Larkin

Pages:1 23

Re: soft-start blunder

<20221220a@crcomp.net>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=112653&group=sci.electronics.design#112653

copy link Newsgroups: sci.electronics.design

Path: i2pn2.org!i2pn.org!eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: g...@crcomp.net (Don)
Newsgroups: sci.electronics.design
Subject: Re: soft-start blunder
Date: Tue, 20 Dec 2022 17:21:03 -0000 (UTC)
Organization: A noiseless patient Spider
Lines: 41
Message-ID: <20221220a@crcomp.net>
References: <cmvjphpgkb4sf3s7to9c8di0ph70um8f6q@4ax.com> <tnecdn$318gt$1@dont-email.me> <t8glph139gjr602hqd7oc43691q0gi9r2d@4ax.com> <tnh24c$3apf0$1@dont-email.me> <kk4pphl0722gaetibmk8t55tirpa57upqu@4ax.com> <tnjl86$3jnf4$1@dont-email.me> <nitrph9i9g3ervse2edkt6321bfth4lmn5@4ax.com> <tnmeok$3u29m$1@dont-email.me> <tjduph94f8phnba1ckqcb3v43up03ktslf@4ax.com> <tnp2nl$7gka$1@dont-email.me> <20221219a@crcomp.net> <ae403371-4207-d7d1-faf9-65948292f066@electrooptical.net>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Injection-Date: Tue, 20 Dec 2022 17:21:03 -0000 (UTC)
Injection-Info: reader01.eternal-september.org; posting-host="6af61c35ed772bded1a5a84a47661b85";
logging-data="795361"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX18tu49AUxir3PTlR6Js6LLE"
Cancel-Lock: sha1:ftqlpOHZ+Z3j0lRemS3CNhGKr8o=

by: Don - Tue, 20 Dec 2022 17:21 UTC

Phil Hobbs wrote:
> Don wrote:
>> Jan Panteltje wrote:
>>> John Larkin wrote:
>>
>> <snip>
>>
>>>> I lost a weekend building two of those for ASML. It's technically
>>>> "Manhattan Style", little FR4 platforms. You can make nice 50 ohm
>>>> transmission lines that way, about 120 mils wide using 0.062 thick
>>>> FR4.
>>>
>>> Its nice, combining all those small boards!
>>> In my case many of the chip adaptors have .1 inch spacing pins so they
>>> fit nicely in the 'veroboard' holes.
>>> Wires and SMDs directly soldered between the round isles, even the edge
>>> connectors fit.
>>
>> My MP3 player uses Neo-Manhattan:
>>
>> <https://crcomp.net/mp3mod/neomanhattan.png>
>>
>> A reworked Universal board will soon replace the green PCB shown above.
>> The new Universal prototype will then be bolted to the substrate.
>> Manhattan only works for me near the end of my iterative prototype
>> process. YYMV.
>>
> Bowery, very bowery. ;)

It's substance over style, for the time being. Although Muse, my MP3
player, may now be covered in soot (or rather Gorilla duct tape adhesive
remnants) she'll soon sparkle more than Cinderella. Shortly she'll sport
a shiny new Universal top and then get cleaned up for her final photo.

Danke,

--
Don, KB7RPU, https://www.qsl.net/kb7rpu
There was a young lady named Bright Whose speed was far faster than light;
She set out one day In a relative way And returned on the previous night.

Re: soft-start blunder

<76u3qhhm43t2su4ej731jr4o6ldp0sdde1@4ax.com>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=112659&group=sci.electronics.design#112659

copy link Newsgroups: sci.electronics.design

Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!nntp.supernews.com!news.supernews.com.POSTED!not-for-mail
NNTP-Posting-Date: Tue, 20 Dec 2022 18:03:59 +0000
From: jlar...@highland_atwork_technology.com (John Larkin)
Newsgroups: sci.electronics.design
Subject: Re: soft-start blunder
Date: Tue, 20 Dec 2022 10:03:59 -0800
Organization: Highland Tech
Reply-To: xx@yy.com
Message-ID: <76u3qhhm43t2su4ej731jr4o6ldp0sdde1@4ax.com>
References: <tnh24c$3apf0$1@dont-email.me> <kk4pphl0722gaetibmk8t55tirpa57upqu@4ax.com> <tnjl86$3jnf4$1@dont-email.me> <nitrph9i9g3ervse2edkt6321bfth4lmn5@4ax.com> <tnmeok$3u29m$1@dont-email.me> <tjduph94f8phnba1ckqcb3v43up03ktslf@4ax.com> <tnp2nl$7gka$1@dont-email.me> <20221219a@crcomp.net> <ae403371-4207-d7d1-faf9-65948292f066@electrooptical.net> <lll3qhda8c3qbivqgij5crnffilovp1oo4@4ax.com> <2a35a5ed-68e6-7edb-9fde-b25120e64a8f@electrooptical.net>
X-Newsreader: Forte Agent 3.1/32.783
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 58
X-Trace: sv3-O4H0xquK/niZPy+O1LmFkDPdIHnbC3zEjI7RFRmOh0p4zsav9LxSzkRiCfywkQ4OPy8iUHIM7IN4/vP!7v92xrqh/1qNkZLkCi9WuvCRAuYwuH92SdA95bNIqR4mPRo7j3vTxvMunQtRB2hLRc8GED64y8lm!5r6JeQ==
X-Complaints-To: www.supernews.com/docs/abuse.html
X-DMCA-Complaints-To: www.supernews.com/docs/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40

by: John Larkin - Tue, 20 Dec 2022 18:03 UTC

On Tue, 20 Dec 2022 10:40:16 -0500, Phil Hobbs
<pcdhSpamMeSenseless@electrooptical.net> wrote:

>John Larkin wrote:
>> On Tue, 20 Dec 2022 10:27:27 -0500, Phil Hobbs
>> <pcdhSpamMeSenseless@electrooptical.net> wrote:
>>
>>> Don wrote:
>>>> Jan Panteltje wrote:
>>>>> John Larkin wrote:
>>>>
>>>> <snip>
>>>>
>>>>>> I lost a weekend building two of those for ASML. It's technically
>>>>>> "Manhattan Style", little FR4 platforms. You can make nice 50 ohm
>>>>>> transmission lines that way, about 120 mils wide using 0.062 thick
>>>>>> FR4.
>>>>>
>>>>> Its nice, combining all those small boards!
>>>>> In my case many of the chip adaptors have .1 inch spacing pins so they
>>>>> fit nicely in the 'veroboard' holes.
>>>>> Wires and SMDs directly soldered between the round isles, even the edge
>>>>> connectors fit.
>>>>
>>>> My MP3 player uses Neo-Manhattan:
>>>>
>>>> <https://crcomp.net/mp3mod/neomanhattan.png>
>>>>
>>>> A reworked Universal board will soon replace the green PCB shown above.
>>>> The new Universal prototype will then be bolted to the substrate.
>>>> Manhattan only works for me near the end of my iterative prototype
>>>> process. YYMV.
>>>>
>>>> Danke,
>>>>
>>> Bowery, very bowery. ;)
>>>
>>> Cheers
>>>
>>> Phil Hobbs
>>
>> My style is more Battery Park.
>>
>
>Nah, with all that bling you're definitely Fifth Avenue. (Not my
>natural habitat.) ;)

Breadboards At Tiffany's.

>
>Cheers
>
>Phil "The only good bug is a dead bug" Hobbs

Insect abuse.

Re: soft-start blunder

<69u3qhtebbj57879vfuusimbs23ck1ic13@4ax.com>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=112660&group=sci.electronics.design#112660

copy link Newsgroups: sci.electronics.design

Path: i2pn2.org!i2pn.org!weretis.net!feeder6.news.weretis.net!news.misty.com!border-2.nntp.ord.giganews.com!nntp.giganews.com!Xl.tags.giganews.com!local-1.nntp.ord.giganews.com!nntp.supernews.com!news.supernews.com.POSTED!not-for-mail
NNTP-Posting-Date: Tue, 20 Dec 2022 18:07:02 +0000
From: jlar...@highland_atwork_technology.com (John Larkin)
Newsgroups: sci.electronics.design
Subject: Re: soft-start blunder
Date: Tue, 20 Dec 2022 10:07:02 -0800
Organization: Highland Tech
Reply-To: xx@yy.com
Message-ID: <69u3qhtebbj57879vfuusimbs23ck1ic13@4ax.com>
References: <tnecdn$318gt$1@dont-email.me> <t8glph139gjr602hqd7oc43691q0gi9r2d@4ax.com> <tnh24c$3apf0$1@dont-email.me> <kk4pphl0722gaetibmk8t55tirpa57upqu@4ax.com> <tnjl86$3jnf4$1@dont-email.me> <nitrph9i9g3ervse2edkt6321bfth4lmn5@4ax.com> <tnmeok$3u29m$1@dont-email.me> <tjduph94f8phnba1ckqcb3v43up03ktslf@4ax.com> <tnp2nl$7gka$1@dont-email.me> <20221219a@crcomp.net> <ae403371-4207-d7d1-faf9-65948292f066@electrooptical.net> <20221220a@crcomp.net>
X-Newsreader: Forte Agent 3.1/32.783
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 44
X-Trace: sv3-KV3GJcHQxou8Tzux7pd2WaxsvGxHNxmhN6OCF9g4HoGEHEZ8zL4ZjrjfqhJW+sB+d3EdOSWvkUBX8DM!YcS6c8S5Zo7DVH2txbxDQr4Faxev0OEHBAFz9BtLtCrS5fEcmqAAD3gOIsNsCU6SewF8tMQ18R5b!jOxQ0Q==
X-Complaints-To: www.supernews.com/docs/abuse.html
X-DMCA-Complaints-To: www.supernews.com/docs/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40

by: John Larkin - Tue, 20 Dec 2022 18:07 UTC

On Tue, 20 Dec 2022 17:21:03 -0000 (UTC), "Don" <g@crcomp.net> wrote:

>Phil Hobbs wrote:
>> Don wrote:
>>> Jan Panteltje wrote:
>>>> John Larkin wrote:
>>>
>>> <snip>
>>>
>>>>> I lost a weekend building two of those for ASML. It's technically
>>>>> "Manhattan Style", little FR4 platforms. You can make nice 50 ohm
>>>>> transmission lines that way, about 120 mils wide using 0.062 thick
>>>>> FR4.
>>>>
>>>> Its nice, combining all those small boards!
>>>> In my case many of the chip adaptors have .1 inch spacing pins so they
>>>> fit nicely in the 'veroboard' holes.
>>>> Wires and SMDs directly soldered between the round isles, even the edge
>>>> connectors fit.
>>>
>>> My MP3 player uses Neo-Manhattan:
>>>
>>> <https://crcomp.net/mp3mod/neomanhattan.png>
>>>
>>> A reworked Universal board will soon replace the green PCB shown above.
>>> The new Universal prototype will then be bolted to the substrate.
>>> Manhattan only works for me near the end of my iterative prototype
>>> process. YYMV.
>>>
>> Bowery, very bowery. ;)
>
>It's substance over style, for the time being. Although Muse, my MP3
>player, may now be covered in soot (or rather Gorilla duct tape adhesive
>remnants) she'll soon sparkle more than Cinderella. Shortly she'll sport
>a shiny new Universal top and then get cleaned up for her final photo.
>
>Danke,

We have a PCB solvent washing machine down in production that I am
technically not allowed to use. It takes the flux and sharpie marks
off my protos and makes them glitter.

I use 63/37 solder of course. Shiny.

Re: soft-start blunder

<b3f75e3a-cc59-4fa3-bc9f-bfdfe84e7b80n@googlegroups.com>

copy mid

https://www.novabbs.com/tech/article-flat.php?id=112759&group=sci.electronics.design#112759

copy link Newsgroups: sci.electronics.design

X-Received: by 2002:a05:6214:3b06:b0:4c7:6364:ee90 with SMTP id nm6-20020a0562143b0600b004c76364ee90mr189531qvb.29.1671698988742;
Thu, 22 Dec 2022 00:49:48 -0800 (PST)
X-Received: by 2002:a37:702:0:b0:6ec:544b:f708 with SMTP id
2-20020a370702000000b006ec544bf708mr111058qkh.192.1671698988523; Thu, 22 Dec
2022 00:49:48 -0800 (PST)
Path: i2pn2.org!i2pn.org!aioe.org!news.mixmin.net!border-2.nntp.ord.giganews.com!nntp.giganews.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: sci.electronics.design
Date: Thu, 22 Dec 2022 00:49:48 -0800 (PST)
In-Reply-To: <69u3qhtebbj57879vfuusimbs23ck1ic13@4ax.com>
Injection-Info: google-groups.googlegroups.com; posting-host=45.87.212.43; posting-account=9_rDyQoAAACzlTReoqriNvzR931rIANJ
NNTP-Posting-Host: 45.87.212.43
References: <tnecdn$318gt$1@dont-email.me> <t8glph139gjr602hqd7oc43691q0gi9r2d@4ax.com>
<tnh24c$3apf0$1@dont-email.me> <kk4pphl0722gaetibmk8t55tirpa57upqu@4ax.com>
<tnjl86$3jnf4$1@dont-email.me> <nitrph9i9g3ervse2edkt6321bfth4lmn5@4ax.com>
<tnmeok$3u29m$1@dont-email.me> <tjduph94f8phnba1ckqcb3v43up03ktslf@4ax.com>
<tnp2nl$7gka$1@dont-email.me> <20221219a@crcomp.net> <ae403371-4207-d7d1-faf9-65948292f066@electrooptical.net>
<20221220a@crcomp.net> <69u3qhtebbj57879vfuusimbs23ck1ic13@4ax.com>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <b3f75e3a-cc59-4fa3-bc9f-bfdfe84e7b80n@googlegroups.com>
Subject: Re: soft-start blunder
From: sales.me...@gmail.com (Mega WeedMarket)
Injection-Date: Thu, 22 Dec 2022 08:49:48 +0000
Content-Type: text/plain; charset="UTF-8"
Lines: 33

by: Mega WeedMarket - Thu, 22 Dec 2022 08:49 UTC

Your website/blog is very informative!

https://qualitypinballcompany.com/product/jurassic_park_pinball/
https://qualitypinballcompany.com/product/tales_of_arabian_nights/
https://qualitypinballcompany.com/product/twilight_zone_pinball_for_sale/
https://qualitypinballcompany.com/product/pinball_machine_star_wars/
https://qualitypinballcompany.com/product/batman_66_pinball_for_sale/
https://qualitypinballcompany.com/product/buy_iron_man_pinball_online/

tech / sci.electronics.design / Re: soft-start blunder

Pages:1 23

server_pubkey.txt

rocksolid light 0.9.81
clearnet tor