Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  newsreader  groups  login

Message-ID:  

If loving linux is wrong, I dont wanna be right. -- Topic for #LinuxGER

tech / sci.engr.joining.welding / Re: tig tutorial

SubjectAuthor
* tig tutorialF Murtz
+- Re: tig tutorialRichard Smith
`* Re: tig tutorialCharlie+
 `- Re: tig tutorialRichard Smith

1
tig tutorial

<qM3ZI.17638$YW.11940@fx05.iad>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=110&group=sci.engr.joining.welding#110

  copy link   Newsgroups: sci.engr.joining.welding
Path: i2pn2.org!i2pn.org!weretis.net!feeder8.news.weretis.net!newsreader4.netcologne.de!news.netcologne.de!peer02.ams1!peer.ams1.xlned.com!news.xlned.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx05.iad.POSTED!not-for-mail
Newsgroups: sci.engr.joining.welding
X-Mozilla-News-Host: news://news.astraweb.com:119
From: hagg...@hotmail.com (F Murtz)
Subject: tig tutorial
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
Thunderbird/78.11.0
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Lines: 6
Message-ID: <qM3ZI.17638$YW.11940@fx05.iad>
X-Complaints-To: https://www.astraweb.com/aup
NNTP-Posting-Date: Sun, 05 Sep 2021 13:39:34 UTC
Date: Sun, 5 Sep 2021 23:39:32 +1000
X-Received-Bytes: 1106
 by: F Murtz - Sun, 5 Sep 2021 13:39 UTC

As I said before I have a unimig similar to au unimig 190, it is not a
dedicated tig machine it is mig tig and dc stick,I am trying tig without
much sucess, every tutorial carrys on about specialised tig machines
I wish instruction on basics voltage setting if applicable and current
settings and how to without pedals, buttons fancy ignition,just scratch
start and valve on handle for gas

Re: tig tutorial

<lypmtljyhi.fsf@richards-air-2.home>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=111&group=sci.engr.joining.welding#111

  copy link   Newsgroups: sci.engr.joining.welding
Path: i2pn2.org!i2pn.org!aioe.org!SitsikrlICv/kJ0vivirqg.user.46.165.242.91.POSTED!not-for-mail
From: nul...@void.com (Richard Smith)
Newsgroups: sci.engr.joining.welding
Subject: Re: tig tutorial
Date: Mon, 06 Sep 2021 20:27:37 +0100
Organization: Aioe.org NNTP Server
Message-ID: <lypmtljyhi.fsf@richards-air-2.home>
References: <qM3ZI.17638$YW.11940@fx05.iad>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Injection-Info: gioia.aioe.org; logging-data="33167"; posting-host="SitsikrlICv/kJ0vivirqg.user.gioia.aioe.org"; mail-complaints-to="abuse@aioe.org";
User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.1 (darwin)
Cancel-Lock: sha1:bP6zLwyQJs3Ro2/R2BVzNaE0IeU=
X-Notice: Filtered by postfilter v. 0.9.2
 by: Richard Smith - Mon, 6 Sep 2021 19:27 UTC

F Murtz <haggisz@hotmail.com> writes:

> As I said before I have a unimig similar to au unimig 190, it is not
> a dedicated tig machine it is mig tig and dc stick,I am trying tig
> without much sucess, every tutorial carrys on about specialised tig
> machines
> I wish instruction on basics voltage setting if applicable and current
> settings and how to without pedals, buttons fancy ignition,just
> scratch start and valve on handle for gas

TIG is a constant-current process like SMAW / "stick".
You set the Amps only and Volts floats to what it does according to
the Laws of the Universe.
So you want to be on the setting for DC "stick".
Regarding your set-up, I have to recall where I have used very
improvised methods, and been admonished for not have the "proper" kit
- yet got good results. So - I all sounds improbable, but by all
means report back showing us you know where you are going with this.
Best wishes,
Rich Smith

Re: tig tutorial

<c30ejgd908b3ol8v2d3epdkcahth3qa4a9@4ax.com>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=112&group=sci.engr.joining.welding#112

  copy link   Newsgroups: sci.engr.joining.welding
Path: i2pn2.org!rocksolid2!news.neodome.net!news.uzoreto.com!newsfeed.xs4all.nl!newsfeed7.news.xs4all.nl!news-out.netnews.com!news.alt.net!fdc2.netnews.com!peer01.ams1!peer.ams1.xlned.com!news.xlned.com!peer01.ams4!peer.am4.highwinds-media.com!news.highwinds-media.com!fx05.ams4.POSTED!not-for-mail
From: char...@xxx.net (Charlie+)
Newsgroups: sci.engr.joining.welding
Subject: Re: tig tutorial
Organization: None
Message-ID: <c30ejgd908b3ol8v2d3epdkcahth3qa4a9@4ax.com>
References: <qM3ZI.17638$YW.11940@fx05.iad>
X-Newsreader: Forte Agent 6.00/32.1186
X-No-Archive: yes
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 12
X-Complaints-To: abuse@usenet-news.net
NNTP-Posting-Date: Tue, 07 Sep 2021 06:06:25 UTC
Date: Tue, 07 Sep 2021 07:06:24 +0100
X-Received-Bytes: 1229
 by: Charlie+ - Tue, 7 Sep 2021 06:06 UTC

On Sun, 5 Sep 2021 23:39:32 +1000, F Murtz <haggisz@hotmail.com> wrote
as underneath :

> As I said before I have a unimig similar to au unimig 190, it is not a
>dedicated tig machine it is mig tig and dc stick,I am trying tig without
>much sucess, every tutorial carrys on about specialised tig machines
>I wish instruction on basics voltage setting if applicable and current
>settings and how to without pedals, buttons fancy ignition,just scratch
>start and valve on handle for gas

Might this help! C+
https://www.youtube.com/watch?v=--1lSmtuyUg

Re: tig tutorial

<ly4kavdlne.fsf@void.com>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=113&group=sci.engr.joining.welding#113

  copy link   Newsgroups: sci.engr.joining.welding
Path: i2pn2.org!i2pn.org!aioe.org!NR6cVADC5laEpWBPEQa+hA.user.46.165.242.91.POSTED!not-for-mail
From: nul...@void.com (Richard Smith)
Newsgroups: sci.engr.joining.welding
Subject: Re: tig tutorial
Date: Wed, 08 Sep 2021 18:25:57 +0100
Organization: Aioe.org NNTP Server
Message-ID: <ly4kavdlne.fsf@void.com>
References: <qM3ZI.17638$YW.11940@fx05.iad> <c30ejgd908b3ol8v2d3epdkcahth3qa4a9@4ax.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Injection-Info: gioia.aioe.org; logging-data="14225"; posting-host="NR6cVADC5laEpWBPEQa+hA.user.gioia.aioe.org"; mail-complaints-to="abuse@aioe.org";
User-Agent: Gnus/5.11 (Gnus v5.11) Emacs/22.1 (darwin)
Cancel-Lock: sha1:3QqpKvQ4VMjArijQaoaNEHIbKQA=
X-Notice: Filtered by postfilter v. 0.9.2
 by: Richard Smith - Wed, 8 Sep 2021 17:25 UTC

Charlie+ <charlie@xxx.net> writes:

> On Sun, 5 Sep 2021 23:39:32 +1000, F Murtz <haggisz@hotmail.com> wrote
> as underneath :
>
>> As I said before I have a unimig similar to au unimig 190, it is not a
>>dedicated tig machine it is mig tig and dc stick,I am trying tig without
>>much sucess, every tutorial carrys on about specialised tig machines
>>I wish instruction on basics voltage setting if applicable and current
>>settings and how to without pedals, buttons fancy ignition,just scratch
>>start and valve on handle for gas
>
> Might this help! C+
> https://www.youtube.com/watch?v=--1lSmtuyUg

Met "6013 only" welding machines, for sure.

1
server_pubkey.txt

rocksolid light 0.9.8
clearnet tor