<div><h1>E-Sys 3.25.3 psdzdata 3 52.1 crack: How to install and use it for BMW coding</h1></div><div><p>E-Sys is a software program that allows you to customize and code your BMW car. It works with a BMW ENET interface cable (OBD to Ethernet) and a psdzdata file that contains the data for different models and features. In this article, we will show you how to install and use E-Sys 3.25.3 psdzdata 3 52.1 crack, which is a modified version of the original software that bypasses the token and PIN requirements.</p></div><div><h2>Installation steps</h2></div><div><ol></div><div><li>Download E-Sys 3..25.3 psdzdata 3 52.1 crack from one of the web search results[^1^] [^2^].</li></div><div><li>Run "E-sys\E-Sys_Setup_3_25_3_RC_b40861.exe" to install the program to the default location "C:\EC-Apps\ESG" (i.e. "C:\EC-Apps\ESG\E-Sys\").</li></div><div><li>During E-Sys installation, when prompted change the default Data Path from "C:\Data\" to "C:\ESysData\".</li></div><div><li>Copy "EDIABAS" folder to the root of "C:\" (i.e. "C:\EDIABAS").</li></div><div><li>Run "C:\EDIABAS\Hardware\Ediabas-Konfigurator\Ediabas-Konfigurator.exe" and make sure "Interface:" is set to "INTERFACE=ENET". (It should already be set, but check anyway - if you need to change it, use the drop-down list and select "INTERFACE=ENET" and then "Andern" and then "Ende".)</li></div><div><li>Create a subfolder "E-Sys EST" under "C:\ESysData\" (i.e. "C:\ESysData\E-Sys EST").</li></div><div><li>Copy the EST token file (e.g. "esys_v1.4.EST") to the "E-Sys EST" folder (i.e. "C:\ESysData\E-Sys EST\esys_v1.4.EST").</li></div><div><li>If an existing "psdzdata" folder exists in "C:\ESysData\" (i.e. "C:\ESysData\psdzdata") delete it.</li></div><div><li>Copy the downloaded "psdzdata" folder to "C:\ESysData\" (i.e. "C:\ESysData\psdzdata").</li></div><div><li>Make sure that there is a "Dist" folder in each of the chassis folders (F01/F10/F20/F25/K001/RR01) etc. (e.g. "C:\ESysData\psdzdata\mainseries\F010\F010_12_03_511\odx\dist"). (It should already be set, but check anyway - if not there - create empty "Dist" folders for each chassis folder).</li></div><div></ol></div><div><h2>Usage steps</h2></div><div><ol></div><div><li>Turn your car's auxiliary power on (engine off) and make a connection to your car with the OBDII-ENET interface cable (wait a few minutes until the network adapter icon shows a connection with the yellow exclamation point over it). (The car does not have a DHCP server, so it does not assign an IP address to the computer.)</li></div><div><li>Run E-Sys from the desktop shortcut or from "C:\EC-Apps\ESG\E-Sys\E-Sys.exe"..</li></div><div><li>Select your target chassis from the drop-down list on the top left corner.</li></div><div><li>Select your connection type as "Connection via VIN".</li></div><div><li>Click on the connect icon on the top left corner.</li></div><div><li>If prompted, enter your token PIN as 2690.</li></div><div><li>Wait for E-Sys to read your vehicle data and show your VIN number on the title bar.</li></div><div><li>You can now access different modules and features of your car by using the Expert Mode or Coding Mode tabs on the left panel.</li></div><div><li>To code a specific module or feature, select it from the tree view on the left panel, read its current values by clicking on the Read</p></div><div></div><div><h2>E-Sys 3.25.3 psdzdata 3 52.1 crack</h2><br /><p><b><b>Download</b> ->>->>->> <a href="https://proxmenmrostdo.blogspot.com/?file=2wEizN">https://proxmenmrostdo.blogspot..com/?file=2wEizN</a></b></p><br /><br /> 35727fac0c</div><div></div><div></div><div></div><div></div>