Message-ID:

< jaybonci> actually d-i stands for "divine intervention" ;) -- in #debian-devel

tech / rec.crafts.metalworking / 360mp power MIG TIG settings not responding to foot pedal control

360mp power MIG TIG settings not responding to foot pedal control

<16ddd488fbed1ab9$2$293204$4226dab3@news.newsgroupdirect.com>

https://www.novabbs.com/tech/article-flat.php?id=5720&group=rec.crafts.metalworking#5720

copy link Newsgroups: rec.crafts.metalworking
Followup: rec.crafts.metalworking

Subject: 360mp power MIG TIG settings not responding to foot pedal control
From: 0f850390...@example.com (ES)
Sender: ES <0f8503901d844703eea1acecb7a4938a_2862@example.com>
Newsgroups: rec.crafts.metalworking
Followup-To: rec.crafts.metalworking
Content-Type: text/plain; charset="iso-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit
User-Agent: Hermes v1.4
Injection-Info: fcc304c7dbe9e9423a7b6bf47b4c9fce;34d1e6c5c029162fc16837feb0e7059d
Lines: 8
Path: i2pn2.org!i2pn.org!aioe.org!news.uzoreto.com!feeder.usenetexpress.com!tr3.eu1.usenetexpress.com!news.newsgroupdirect.com!not-for-mail
Date: Sat, 19 Mar 2022 16:18:43 +0000
NNTP-Posting-Date: Sat, 19 Mar 2022 16:18:43 +0000
X-Received-Bytes: 815
Organization: NewsgroupDirect
X-Complaints-To: abuse@newsgroupdirect.com
Message-ID: <16ddd488fbed1ab9$2$293204$4226dab3@news.newsgroupdirect.com>

by: ES - Sat, 19 Mar 2022 16:18 UTC

When I set to TIG mode I can not access down slope control nor will my foot
pedal adjust the amperage amount. I can either have full amperage setting with
post flow or nothing

--
for full context, visit https://www.polytechforum.com/metalworking/360mp-power-mig-tig-settings-not-responding-to-foot-pedal-co-652935-.htm

Subject	Author
360mp power MIG TIG settings not responding to foot pedal control	ES