Rocksolid Light

Welcome to novaBBS (click a section below)

mail  files  register  newsreader  groups  login

Message-ID:  

: is not an identifier

tech / rec.crafts.metalworking / Re: Dalton Lathe.

SubjectAuthor
* Dalton Lathe.Robert Walpole
+* Re: Dalton Lathe.animal1@psln.com
|`- Re: Dalton Lathe.Jim Wilkins
`* Re: Dalton Lathe.Bob Engelhardt
 `- Re: Dalton Lathe.Jim Wilkins

1
Dalton Lathe.

<ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=6387&group=rec.crafts.metalworking#6387

  copy link   Newsgroups: rec.crafts.metalworking
X-Received: by 2002:a05:622a:205:b0:343:282:3d0e with SMTP id b5-20020a05622a020500b0034302823d0emr40953744qtx.436.1662417459065;
Mon, 05 Sep 2022 15:37:39 -0700 (PDT)
X-Received: by 2002:a05:622a:178e:b0:344:56a8:25da with SMTP id
s14-20020a05622a178e00b0034456a825damr41298895qtk.375.1662417458937; Mon, 05
Sep 2022 15:37:38 -0700 (PDT)
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: rec.crafts.metalworking
Date: Mon, 5 Sep 2022 15:37:38 -0700 (PDT)
Injection-Info: google-groups.googlegroups.com; posting-host=2600:1700:4a54:80:5ce2:a612:ba85:e5d1;
posting-account=gyLDpwoAAAC9ANXpZMWZspcsrdbPE-9L
NNTP-Posting-Host: 2600:1700:4a54:80:5ce2:a612:ba85:e5d1
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com>
Subject: Dalton Lathe.
From: 88redbr...@gmail.com (Robert Walpole)
Injection-Date: Mon, 05 Sep 2022 22:37:39 +0000
Content-Type: text/plain; charset="UTF-8"
X-Received-Bytes: 1188
 by: Robert Walpole - Mon, 5 Sep 2022 22:37 UTC

Hi, is this group still active? I have recently been given a Dalton Lathe and would like to learn more about them.

Hope to hear from someone,

Rob in NC.

Re: Dalton Lathe.

<e60ab9c0-7c10-4b82-93e1-8713d18f6560n@googlegroups.com>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=6388&group=rec.crafts.metalworking#6388

  copy link   Newsgroups: rec.crafts.metalworking
X-Received: by 2002:a05:622a:178e:b0:344:56a8:25da with SMTP id s14-20020a05622a178e00b0034456a825damr41535439qtk.375.1662422525956;
Mon, 05 Sep 2022 17:02:05 -0700 (PDT)
X-Received: by 2002:a05:6214:c23:b0:477:a6dd:70f8 with SMTP id
a3-20020a0562140c2300b00477a6dd70f8mr41939326qvd.23.1662422525821; Mon, 05
Sep 2022 17:02:05 -0700 (PDT)
Path: i2pn2.org!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!news-out.google.com!nntp.google.com!postnews.google.com!google-groups.googlegroups.com!not-for-mail
Newsgroups: rec.crafts.metalworking
Date: Mon, 5 Sep 2022 17:02:05 -0700 (PDT)
In-Reply-To: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com>
Injection-Info: google-groups.googlegroups.com; posting-host=98.97.61.164; posting-account=NNFtPgoAAAAUOh9MxiN09nYy43UrvxUC
NNTP-Posting-Host: 98.97.61.164
References: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com>
User-Agent: G2/1.0
MIME-Version: 1.0
Message-ID: <e60ab9c0-7c10-4b82-93e1-8713d18f6560n@googlegroups.com>
Subject: Re: Dalton Lathe.
From: anim...@psln.com (animal1@psln.com)
Injection-Date: Tue, 06 Sep 2022 00:02:05 +0000
Content-Type: text/plain; charset="UTF-8"
X-Received-Bytes: 1650
 by: animal1@psln.com - Tue, 6 Sep 2022 00:02 UTC

On Monday, September 5, 2022 at 3:37:40 PM UTC-7, Robert Walpole wrote:
> Hi, is this group still active? I have recently been given a Dalton Lathe and would like to learn more about them.
>
> Hope to hear from someone,
>
> Rob in NC.

You'll probably find more info over here
https://www.practicalmachinist.com/forum/categories/antique-machinery-and-history.19/ this forum is real active .
http://www.vintagemachinery.org/mfgIndex/detail.aspx?id=2756
http://www.lathes.co.uk/dalton/index.html
good luck
animal

Re: Dalton Lathe.

<RXHRK.110113$IRd5.11496@fx10.iad>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=6389&group=rec.crafts.metalworking#6389

  copy link   Newsgroups: rec.crafts.metalworking
Path: i2pn2.org!rocksolid2!i2pn.org!usenet.blueworldhosting.com!feed1.usenet.blueworldhosting.com!peer01.iad!feed-me.highwinds-media.com!news.highwinds-media.com!fx10.iad.POSTED!not-for-mail
Subject: Re: Dalton Lathe.
Newsgroups: rec.crafts.metalworking
References: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com>
From: BobEngel...@comcast.net (Bob Engelhardt)
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101
Thunderbird/52.6.0
MIME-Version: 1.0
In-Reply-To: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Lines: 12
Message-ID: <RXHRK.110113$IRd5.11496@fx10.iad>
X-Complaints-To: https://www.astraweb.com/aup
NNTP-Posting-Date: Tue, 06 Sep 2022 13:30:25 UTC
Date: Tue, 6 Sep 2022 09:30:25 -0400
X-Received-Bytes: 1063
 by: Bob Engelhardt - Tue, 6 Sep 2022 13:30 UTC

On 9/5/2022 6:37 PM, Robert Walpole wrote:
> Hi, is this group still active? I have recently been given a Dalton Lathe and would like to learn more about them.
>
> Hope to hear from someone,
>
> Rob in NC.
>

Not very much going on here. Years ago ...

My favorite: https://bbs.homeshopmachinist.net/forum/general

Re: Dalton Lathe.

<tf7tml$3uvm1$1@dont-email.me>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=6390&group=rec.crafts.metalworking#6390

  copy link   Newsgroups: rec.crafts.metalworking
Path: i2pn2.org!i2pn.org!eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: muratla...@gmail.com (Jim Wilkins)
Newsgroups: rec.crafts.metalworking
Subject: Re: Dalton Lathe.
Date: Tue, 6 Sep 2022 12:48:55 -0400
Organization: A noiseless patient Spider
Lines: 1
Message-ID: <tf7tml$3uvm1$1@dont-email.me>
References: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com> <RXHRK.110113$IRd5.11496@fx10.iad>
MIME-Version: 1.0
Content-Type: text/plain;
format=flowed;
charset="UTF-8";
reply-type=response
Content-Transfer-Encoding: 7bit
Injection-Date: Tue, 6 Sep 2022 16:49:26 -0000 (UTC)
Injection-Info: reader01.eternal-september.org; posting-host="b54ac68760968fef5a764bac8e864272";
logging-data="4161217"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX1/3ei6UQfQL/gDX6s8YLMKvs6fdnyvshEg="
Cancel-Lock: sha1:M/ULA80ZsAXt876dSdZviG1IHbA=
X-MSMail-Priority: Normal
X-Antivirus-Status: Clean
In-Reply-To: <RXHRK.110113$IRd5.11496@fx10.iad>
X-Newsreader: Microsoft Windows Live Mail 16.4.3505.912
X-Antivirus: AVG (VPS 220906-6, 9/6/2022), Outbound message
X-Priority: 3
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V16.4.3505.912
 by: Jim Wilkins - Tue, 6 Sep 2022 16:48 UTC

"Bob Engelhardt" wrote in message news:RXHRK.110113$IRd5.11496@fx10.iad...

On 9/5/2022 6:37 PM, Robert Walpole wrote:
> Hi, is this group still active? I have recently been given a Dalton Lathe
> and would like to learn more about them.
>
> Hope to hear from someone,
>
> Rob in NC.
>
Not very much going on here. Years ago ...

My favorite: https://bbs.homeshopmachinist.net/forum/general

---------------

The South Bend Lathe book "How to Run a Lathe" Is a good operator's manual
for older (and modern hobby) machines.
http://www.vintagemachinery.org/pubs/1617/3789.pdf

Although it's from 1914, almost everything in it is still valid for today's
manual lathe work. Newer editions leave out things that might apply to your
old Dalton. Allen wrenches can be ground to imitate forged cutting tools to
get yourself started.

Re: Dalton Lathe.

<tf90ao$50nb$1@dont-email.me>

  copy mid

https://www.novabbs.com/tech/article-flat.php?id=6391&group=rec.crafts.metalworking#6391

  copy link   Newsgroups: rec.crafts.metalworking
Path: i2pn2.org!i2pn.org!eternal-september.org!reader01.eternal-september.org!.POSTED!not-for-mail
From: muratla...@gmail.com (Jim Wilkins)
Newsgroups: rec.crafts.metalworking
Subject: Re: Dalton Lathe.
Date: Tue, 6 Sep 2022 22:39:54 -0400
Organization: A noiseless patient Spider
Lines: 1
Message-ID: <tf90ao$50nb$1@dont-email.me>
References: <ce6acc73-d1b0-4e0c-975f-51f08e02c347n@googlegroups.com> <e60ab9c0-7c10-4b82-93e1-8713d18f6560n@googlegroups.com>
MIME-Version: 1.0
Content-Type: text/plain;
format=flowed;
charset="UTF-8";
reply-type=original
Content-Transfer-Encoding: 7bit
Injection-Date: Wed, 7 Sep 2022 02:40:25 -0000 (UTC)
Injection-Info: reader01.eternal-september.org; posting-host="363e5248c4f5f518e1f0891b06272f79";
logging-data="164587"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX185upL4oPn0CBiZ8UA+lrJTYNVdykJfuCQ="
Cancel-Lock: sha1:nCAJdpePZDO9pZ7RgPisfp3VMI8=
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V16.4.3505.912
X-Antivirus: AVG (VPS 220906-6, 9/6/2022), Outbound message
In-Reply-To: <e60ab9c0-7c10-4b82-93e1-8713d18f6560n@googlegroups.com>
X-Newsreader: Microsoft Windows Live Mail 16.4.3505.912
X-MSMail-Priority: Normal
X-Antivirus-Status: Clean
X-Priority: 3
 by: Jim Wilkins - Wed, 7 Sep 2022 02:39 UTC

wrote in message
news:e60ab9c0-7c10-4b82-93e1-8713d18f6560n@googlegroups.com...

On Monday, September 5, 2022 at 3:37:40 PM UTC-7, Robert Walpole wrote:
> Hi, is this group still active? I have recently been given a Dalton Lathe
> and would like to learn more about them.
>
> Hope to hear from someone,
>
> Rob in NC.

You'll probably find more info over here
https://www.practicalmachinist.com/forum/categories/antique-machinery-and-history.19/
this forum is real active .
http://www.vintagemachinery.org/mfgIndex/detail.aspx?id=2756
http://www.lathes.co.uk/dalton/index.html
good luck
animal

-----------------------

The photos of the 'Dalton Lot 6 - as new' show many details that are very
similar to my 1965 South Bend, such as the ball-closed oilers and the
forward/reverse threading mechanism (tumbler) which SB calls a recent
improvement in 1914. I even have a diamond-knurled Jacobs chuck.

The spout on an Eagle model 66 brass oil can matches those oil fittings, and
opens the spring cap on Gits oil cups. Since I have one (bought new) I
haven't looked for current production oilers that also fit.

1
server_pubkey.txt

rocksolid light 0.9.8
clearnet tor