novaBBS - rec.crafts.metalworking

Re: Engine i.d.

<0io5phpc5of70nepf2j9udbk3js6p2h0lv@4ax.com>

https://www.novabbs.com/tech/article-flat.php?id=6723&group=rec.crafts.metalworking#6723

copy link Newsgroups: rec.crafts.metalworking

Path: i2pn2.org!i2pn.org!usenet.goja.nl.eu.org!3.eu.feeder.erje.net!feeder.erje.net!newsreader4.netcologne.de!news.netcologne.de!peer03.ams1!peer.ams1.xlned.com!news.xlned.com!peer03.ams4!peer.am4.highwinds-media.com!news.highwinds-media.com!fx05.ams4.POSTED!not-for-mail
From: char...@xxx.net (Charlie+)
Newsgroups: rec.crafts.metalworking
Subject: Re: Engine i.d.
Organization: None
Message-ID: <0io5phpc5of70nepf2j9udbk3js6p2h0lv@4ax.com>
References: <172eedeaac398636$133$3882287$c3d349d6@news.newsgroupdirect.com>
X-Newsreader: Forte Agent 6.00/32.1186
X-No-Archive: yes
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 9
X-Complaints-To: abuse@usenet-news.net
NNTP-Posting-Date: Fri, 09 Dec 2022 07:31:16 UTC
Date: Fri, 09 Dec 2022 07:31:15 +0000
X-Received-Bytes: 1410

by: Charlie+ - Fri, 9 Dec 2022 07:31 UTC

On Thu, 08 Dec 2022 21:15:03 +0000, whoknew1973
<04044782afb56bbcac58640e8f8e2ef4@example.com> wrote as underneath :

2 Stroke? 4 Stroke? Vertical shaft? Horizontal shaft? look online for
the Technitian's Manuals and
Tecumseh Quick Reference Service Information - Covers Engine and
Transmission Products -- a gang of information there. C+

>I have a old tecumseh engine it had a problem take off shaft but all the number tags are missing and I can't find a set of piston rings to fit it.the piston measures 69mm and the bore in the cylinder is 70mm but I ordered rings #32595 and they was about a half inch gap when I put them in cylinder but I don't know what the correct ping size would be or part number

Stupidity, like virtue, is its own reward.

tech / rec.crafts.metalworking / Re: Engine i.d.