tech / rec.crafts.metalworking

Pages:12 3 4 5 6 7 8 9

Subject	Replies	Last Message
Re: cop-killer bullets By: bruce bowser on Mon, 22 May 2023	22	1 Day 5 Hours ago By: Jim Wilkins
Short Back Set Entry Lock Bolts By: Bob La Londe on Sat, 27 May 2023	9	3 Days 5 Hours ago By: Jim Wilkins
Diamond disappointment By: Snag on Sun, 7 May 2023	10	8 Days ago By: Bob La Londe
Re: Mitutoyo Digimatic caliper error "Err 05" By: MC on Sun, 21 May 2023	0	10 Days 4 Hours ago By: MC
Metal content - 27 year old Ford Ranger By: Clare Snyder on Tue, 16 May 2023	15	10 Days 23 Hours ago By: Bob La Londe
Another interesting project By: Snag on Wed, 17 May 2023	2	13 Days 16 Hours ago By: Snag
Asurion - I guess I do not recommend this product either. By: Bob La Londe on Mon, 1 May 2023	9	14 Days 15 Hours ago By: Bob La Londe
I feel Like An Idiot By: Bob La Londe on Sun, 14 May 2023	11	14 Days 22 Hours ago By: Bob La Londe
I do not recommend this product - IR 5HP TS4N5 Compressor By: Bob La Londe on Sun, 30 Apr 2023	49	16 Days 22 Hours ago By: Bob La Londe
18 Degree Half Face Cutter By: Bob La Londe on Sat, 22 Apr 2023	11	16 Days 23 Hours ago By: Bob La Londe
PING ! Bob La Londe By: Snag on Wed, 10 May 2023	11	19 Days 22 Hours ago By: Bob La Londe
Uniformity shall prevail ! By: Snag on Tue, 9 May 2023	1	22 Days ago By: Bob La Londe
OT: Apollo Splash Down Module By: Bob La Londe on Mon, 8 May 2023	3	22 Days 14 Hours ago By: Jim Wilkins
Re: Brain Damaged Leftist Wants To Ban Guns. Period By: !Jones on Tue, 2 May 2023	4	24 Days 6 Hours ago By: Michael Terrell
Re: Building a Homemade Fuel-Injection System on a Briggs and Stratton 5 H By: tech on Thu, 4 May 2023	1	26 Days 17 Hours ago By: David Billington
208-230 vs 230 By: Bob La Londe on Tue, 2 May 2023	2	27 Days 15 Hours ago By: Clare Snyder
Re: Taping bronze? By: Nigel on Thu, 4 May 2023	0	27 Days 15 Hours ago By: Nigel
Re: Building a Homemade Fuel-Injection System on a Briggs and Stratton 5 H By: Meisntyou on Thu, 4 May 2023	0	27 Days 15 Hours ago By: Nigel
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "A conservative case for an assault weapons ban" By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "A conservative case for an assault weapons ban" By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "A conservative case for an assault weapons ban" By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 19 Hours ago By: Carol Kinsey Goman
Re: "A conservative case for an assault weapons ban" By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 20 Hours ago By: Carol Kinsey Goman
Re: "A conservative case for an assault weapons ban" By: Carol Kinsey Goman on Wed, 3 May 2023	0	27 Days 20 Hours ago By: Carol Kinsey Goman
Re: "A conservative case for an assault weapons ban" By: Carol Kinsey Goman on Sat, 29 Apr 2023	11	28 Days 21 Hours ago By: Just Wondering
"We hold these truths to be self-evident..." By: !Jones on Sun, 30 Apr 2023	4	29 Days 19 Hours ago By: Scout
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Sat, 29 Apr 2023	25	29 Days 19 Hours ago By: Ubiquitous
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Sat, 29 Apr 2023	5	29 Days 20 Hours ago By: Scout
The Gash By: Snag on Sat, 29 Apr 2023	10	1 Month 1 Day ago By: Leon Fisk
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Sat, 29 Apr 2023	2	1 Month 1 Day ago By: Lou Bricano
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Sat, 29 Apr 2023	0	1 Month 1 Day ago By: Carol Kinsey Goman
Re: "[T]he right secured by the Second Amendment is not unlimited." By: Carol Kinsey Goman on Sat, 29 Apr 2023	0	1 Month 2 Days ago By: Carol Kinsey Goman
Re: Gunner By: Richard Smith on Tue, 26 Apr 2022	1	1 Month 2 Days ago By: Benny Spencer
It works ! By: Snag on Thu, 27 Apr 2023	8	1 Month 3 Days ago By: Bob La Londe
Re: What's just slightly smaller OD than 1/8" NPT thread???? By: dennis g on Mon, 24 Apr 2023	10	1 Month 3 Days ago By: Jim Wilkins
Re: Sellers 1G drill Grinder parts? By: Sh0velhead on Tue, 18 Apr 2023	3	1 Month 4 Days ago By: Trevor Lawrence
Slightly OT: Rectangular O-rings By: bob prohaska on Mon, 24 Apr 2023	9	1 Month 6 Days ago By: bob prohaska
multitool - oscillating blade power tool - recommendation By: Richard Smith on Wed, 19 Apr 2023	14	1 Month 7 Days ago By: Richard Smith
GM distributor wrench By: Snag on Sun, 16 Apr 2023	11	1 Month 7 Days ago By: Clifford Heath
Fuel Line Springs By: Bob La Londe on Sun, 23 Apr 2023	13	1 Month 7 Days ago By: David Billington
THE MARKINGS ARE GONE!!! DANG-IT! By: Bob La Londe on Sun, 23 Apr 2023	10	1 Month 7 Days ago By: Jim Wilkins
One step left ... By: Snag on Sun, 23 Apr 2023	3	1 Month 7 Days ago By: Jim Wilkins
Tyzack lathe By: Stephen Dixon on Mon, 2 Mar 2020	10	1 Month 8 Days ago By: Lathe noobie
Removing Copper Corrosion (minimal metal content) By: Bob La Londe on Tue, 11 Apr 2023	14	1 Month 8 Days ago By: Bob La Londe
HardAir Magazine monthly teaser By: Leon Fisk on Fri, 31 Mar 2023	34	1 Month 13 Days ago By: Leon Fisk
Most Weather Resistant "Rubber" Cord By: Bob La Londe on Sun, 16 Apr 2023	3	1 Month 14 Days ago By: Joe Gwinn
260 Brass Sucks - HELP! By: Bob La Londe on Fri, 14 Apr 2023	5	1 Month 15 Days ago By: Jim Wilkins
Re: Shoplifting only hype - CNN By: Snag on Sat, 15 Apr 2023	2	1 Month 15 Days ago By: Snag
Weld Evaluation By: Bob La Londe on Thu, 6 Apr 2023	3	1 Month 24 Days ago By: Leon Fisk
Gun Owner Suicide Tops Homicide 54% to 43% By: bruce bowser on Thu, 30 Mar 2023	0	2 Months 1 Day ago By: bruce bowser
Wrong damn angle ... By: Snag on Sat, 18 Mar 2023	106	2 Months 1 Day ago By: Jim Wilkins
A New Beginning By: Snag on Sat, 25 Mar 2023	5	2 Months 4 Days ago By: Snag
Wagner Quitting Ukraine- Heading To Africa Where It's Easier By: bruce bowser on Sat, 25 Mar 2023	0	2 Months 5 Days ago By: bruce bowser
rcm - productivity SMAW 6013 vs 7018 By: Richard Smith on Wed, 15 Mar 2023	54	2 Months 12 Days ago By: Richard Smith
Re: Sandbags in the bed of a pickup truck By: summit64 on Fri, 17 Mar 2023	0	2 Months 13 Days ago By: summit64
Re: How to open a Mosler safe with combination? By: Chrissy on Thu, 16 Mar 2023	0	2 Months 14 Days ago By: Chrissy
"Tiny" Independent 4 Jaw By: Bob La Londe on Sun, 12 Mar 2023	20	2 Months 16 Days ago By: Jim Wilkins
Barium sulphate as coating material By: Gourav Kumar Dewanga on Tue, 14 Mar 2023	1	2 Months 16 Days ago By: Jim Wilkins
End mill sharpening fixture By: Snag on Fri, 10 Mar 2023	2	2 Months 20 Days ago By: Snag
RANT (yes metal working related in more ways than one) By: Bob La Londe on Wed, 8 Mar 2023	9	2 Months 21 Days ago By: Jim Wilkins
3/4 Round Corner Gage By: Bob La Londe on Mon, 27 Feb 2023	30	2 Months 25 Days ago By: Bob La Londe
Re: Harrison L5 headstock oil By: Mr B. on Wed, 1 Mar 2023	0	2 Months 30 Days ago By: Mr B.
press or interference fit By: Clare Snyder on Thu, 23 Feb 2023	15	3 Months 4 Days ago By: Bob La Londe
Re: Whirlwind surgical pump 1930âs By: Joe Gwinn on Sun, 26 Feb 2023	1	3 Months 4 Days ago By: Jim Wilkins
How Elon advances science: By: Jim Wilkins on Mon, 20 Feb 2023	2	3 Months 10 Days ago By: Jim Wilkins
Indicator Rod By: Bob La Londe on Mon, 20 Feb 2023	3	3 Months 10 Days ago By: David Billington
Live Center By: Pedro Agtuca on Sat, 18 Feb 2023	7	3 Months 10 Days ago By: David Billington
Does this count as Metalworking ? By: Snag on Thu, 16 Feb 2023	3	3 Months 13 Days ago By: Bob La Londe
"roping asteroid" diversionary By: bruce bowser on Sun, 12 Feb 2023	0	3 Months 19 Days ago By: bruce bowser
A small welding job By: Snag on Sun, 8 Jan 2023	46	3 Months 20 Days ago By: James Waldby
Re: Bench mill pics' up By: iNotaRobot on Mon, 28 Sep 2020	4	3 Months 23 Days ago By: ANDY
Eighth-inch pipe thread puzzle By: bob prohaska on Mon, 6 Feb 2023	3	3 Months 23 Days ago By: Jim Wilkins
Usenet Access By: Bob La Londe on Sun, 29 Jan 2023	11	3 Months 27 Days ago By: Bob La Londe
Re: precision matthews 10x27 lathe By: Brian230 on Tue, 14 Jun 2022	17	4 Months ago By: brian
Republicans Now Question Russian Nukes. Why? By: bruce bowser on Sun, 29 Jan 2023	0	4 Months 2 Days ago By: bruce bowser
Non Rellable 1 lb propane tanks By: Clare Snyder on Sat, 28 Jan 2023	3	4 Months 2 Days ago By: Bob La Londe
Re: Where does the term "clapped out" come from? By: EneioWolf on Fri, 27 Jan 2023	0	4 Months 4 Days ago By: EneioWolf
Re: A little machining project By: Snag on Sun, 15 Jan 2023	9	4 Months 7 Days ago By: Snag
hydrogen solution and diffusion in "A small welding job" By: Richard Smith on Sun, 22 Jan 2023	7	4 Months 7 Days ago By: Jim Wilkins
Re: Vacuum pump question By: Arturo ZÃ¡rate on Thu, 12 Jan 2023	29	4 Months 11 Days ago By: Richard Smith
Re: NUKE secrets Trump Had At Mar-a-Lago By: Jim Wilkins on Thu, 8 Sep 2022	4	4 Months 14 Days ago By: bruce bowser
Re: Company fined after worker dies from fall into pot of molten iron By: Bob La Londe on Wed, 11 Jan 2023	0	4 Months 19 Days ago By: Bob La Londe
Article - application of "Froude Number" analysing a boat I worked on By: Richard Smith on Sat, 7 Jan 2023	16	4 Months 21 Days ago By: Jim Wilkins
Re: Rockwell-Delta 10 inch lathe spindle taper? By: ericp on Sun, 8 Jan 2023	0	4 Months 23 Days ago By: ericp
Three Form Thread Mill ??? By: Bob La Londe on Mon, 2 Jan 2023	7	4 Months 23 Days ago By: Bob La Londe
Re: Where can I get a manual for a Safety-Kleen 250 parts washer? By: latireco on Fri, 6 Jan 2023	0	4 Months 24 Days ago By: latireco
Burned some flux core today By: Snag on Sun, 1 Jan 2023	5	4 Months 28 Days ago By: Bob La Londe
coastbilt 8" outside caliper with micro adjustment screw. By: pyotr filipivich on Thu, 29 Dec 2022	4	5 Months ago By: pyotr filipivich
Steel Rule By: Bob La Londe on Wed, 28 Dec 2022	3	5 Months 1 Day ago By: Key Dies
how to drill/mill compund angle By: Clare Snyder on Wed, 21 Dec 2022	20	5 Months 4 Days ago By: whit3rd
New welder ! By: Snag on Fri, 16 Dec 2022	58	5 Months 8 Days ago By: Jim Wilkins
Jeweler's & Metal Working Tool Online Auction By: Thomas Hirchak Compa on Thu, 22 Dec 2022	0	5 Months 9 Days ago By: Thomas Hirchak Compa
Re: Gunner -- Nestle Auction in Bakersfield By: Al Feldhauser on Tue, 20 Dec 2022	0	5 Months 10 Days ago By: Al Feldhauser
sharpening end mills By: Snag on Fri, 9 Dec 2022	27	5 Months 16 Days ago By: Jim Wilkins
Biggest Tool For Small (FAST) Spindles - 24K By: Bob La Londe on Mon, 21 Nov 2022	4	5 Months 21 Days ago By: Bob La Londe
Custom D-Drill By: Bob La Londe on Thu, 8 Dec 2022	6	5 Months 21 Days ago By: Bob La Londe
Re: Engine i.d. By: Charlie+ on Fri, 9 Dec 2022	0	5 Months 22 Days ago By: Charlie+
thoughts test-sample X-ray ali welds By: Richard Smith on Wed, 7 Dec 2022	8	5 Months 22 Days ago By: Snag
Re: Removing roll marked material data from aluminum bar stock By: Sheck on Thu, 8 Dec 2022	1	5 Months 22 Days ago By: Bob La Londe
America is Really Metric Under The Surface By: Bob La Londe on Sun, 6 Nov 2022	6	5 Months 22 Days ago By: bruce bowser
Re: Remember Ruby Ridge By: Kaleb Harper on Thu, 8 Dec 2022	0	5 Months 23 Days ago By: Kaleb Harper
Why_The_Power_Grid_Is_An_‘Attractive_Target’_For By: bruce bowser on Thu, 8 Dec 2022	0	5 Months 23 Days ago By: bruce bowser
??? Actually a STUB length carbide 1/2 in end mill ??? By: Bob La Londe on Sat, 26 Nov 2022	10	5 Months 24 Days ago By: Jim Wilkins
Re: "[T]he right secured by the Second Amendment is not unlimited." By: whit3rd on Fri, 2 Dec 2022	3	5 Months 26 Days ago By: Bob La Londe
macro etchant for Ali By: Richard Smith on Sat, 12 Nov 2022	17	6 Months 2 Days ago By: Jim Wilkins
What is Hot Short? By: Bob La Londe on Tue, 15 Nov 2022	3	6 Months 13 Days ago By: Mike Spencer
freezer temp swing By: Snag on Sat, 12 Nov 2022	16	6 Months 16 Days ago By: Jim Wilkins
tight fitted top jaws By: Jim Wilkins on Sun, 13 Nov 2022	6	6 Months 16 Days ago By: Jim Wilkins
McMaster Again - Their unfair reputation on price By: Bob La Londe on Fri, 11 Nov 2022	3	6 Months 19 Days ago By: Bob La Londe
Just when it looked like ... By: Snag on Thu, 10 Nov 2022	3	6 Months 19 Days ago By: Bob La Londe
Re: Monarch 10EE lathe By: jason on Wed, 2 Nov 2022	9	6 Months 20 Days ago By: Richard Smith
3 phase converter - again By: Richard Smith on Mon, 10 Oct 2022	28	6 Months 22 Days ago By: David Billington
Ali MIG/GMAW 27m swaths w twin Cat C32 V12's By: Richard Smith on Wed, 9 Nov 2022	0	6 Months 22 Days ago By: Richard Smith
Mark Wieber in the 75th rangers By: Michael A Terrell on Fri, 4 Nov 2022	4	6 Months 23 Days ago By: Michael A Terrell
Pin Punches - Starrett Vs ___________ By: Bob La Londe on Fri, 4 Nov 2022	0	6 Months 26 Days ago By: Bob La Londe
OT: fuel pump for IH v345 By: bob prohaska on Fri, 4 Nov 2022	1	6 Months 27 Days ago By: Leon Fisk
lathe chuck scroll lube? By: Jim Wilkins on Sat, 29 Oct 2022	14	6 Months 27 Days ago By: Jim Wilkins
Re: HARDINGE HC WIRING DIAGRAM / ELECT PROB By: Sc00ter on Fri, 4 Nov 2022	0	6 Months 27 Days ago By: Sc00ter
Heavy Duty Vacuum Hose By: Bob La Londe on Sun, 23 Oct 2022	5	7 Months 1 Day ago By: Laura Allen
Bending metal part By: Matt on Wed, 26 Oct 2022	4	7 Months 1 Day ago By: Bob La Londe
More Metal Vendor Mysteries By: Bob La Londe on Fri, 28 Oct 2022	0	7 Months 2 Days ago By: Bob La Londe
What's It Going to Be By: Bob La Londe on Tue, 25 Oct 2022	13	7 Months 3 Days ago By: Bob La Londe
record NYC construction By: bruce bowser on Sun, 23 Oct 2022	0	7 Months 7 Days ago By: bruce bowser
Cutting torch tips ? By: Demoman on Wed, 19 Oct 2022	0	7 Months 11 Days ago By: Demoman
Re: 5hp B&S flathead head bolt torque? By: Clody on Sun, 16 Oct 2022	1	7 Months 14 Days ago By: Snag
Re: 5hp B&S flathead head bolt torque? By: Clody on Fri, 14 Oct 2022	2	7 Months 15 Days ago By: Jim Wilkins
Secret Service Breach ? (Trump-era) By: Transition Zone on Wed, 12 Oct 2022	1	7 Months 17 Days ago By: bruce bowser
Hard part is over ... By: Snag on Thu, 13 Oct 2022	0	7 Months 17 Days ago By: Snag
Re: A California city's water supply is expected to run out in two By: Michael A Terrell on Tue, 11 Oct 2022	0	7 Months 20 Days ago By: Michael A Terrell
Re: Sanford SG 48 Surface Grinder Info Needed By: Sub on Mon, 10 Oct 2022	2	7 Months 20 Days ago By: Sub
Refrigerator malf By: Snag on Thu, 29 Sep 2022	7	7 Months 26 Days ago By: Snag
Re: Lincoln wire-matic 255 feed/speed problem By: Haroldharley1962 on Mon, 3 Oct 2022	0	7 Months 27 Days ago By: Haroldharley1962
Re: LGBTQIA+ Transgender Army Major And Wife Indicted For Scheming To Give By: FBI Catches A Faggot on Sun, 2 Oct 2022	0	7 Months 29 Days ago By: FBI Catches A Faggot
Chip cleanup By: Snag on Tue, 16 Aug 2022	5	8 Months ago By: Snag
Re: Thermos Bottle / Vacuum Flask That Doesn't Dribble? By: Russ on Wed, 28 Sep 2022	0	8 Months 3 Days ago By: Russ
QCTP finished By: Snag on Tue, 27 Sep 2022	7	8 Months 3 Days ago By: Snag
Mark Wieber in the 75th Rangers By: Tom Gardner on Tue, 27 Sep 2022	1	8 Months 4 Days ago By: Rudy Canoza
McMaster Order Fulfillment... So Darn Slow By: Bob La Londe on Mon, 26 Sep 2022	0	8 Months 4 Days ago By: Bob La Londe
I Apologize By: Bob La Londe on Fri, 23 Sep 2022	2	8 Months 4 Days ago By: Bob La Londe
Finite Element Analysis - Poisson's Ratio 0 to 0.49 - on my fillet wel By: Richard Smith on Thu, 8 Sep 2022	45	8 Months 9 Days ago By: Jim Wilkins
TiALN vs AlTiN By: Bob La Londe on Sat, 17 Sep 2022	31	8 Months 9 Days ago By: Bob La Londe
Re: Sellers 1G drill Grinder parts? By: 48Rutland on Sun, 11 Sep 2022	2	8 Months 10 Days ago By: M Dalton
The "Great Cull" is long overdue By: Michael Terrell on Mon, 19 Sep 2022	3	8 Months 11 Days ago By: Richard Clayton Wieb
Re: Recomendations for a Good Wire Tracer? By: daviddarwin on Wed, 14 Sep 2022	0	8 Months 17 Days ago By: daviddarwin
Video Versus the Hood By: Bob La Londe on Mon, 5 Sep 2022	3	8 Months 19 Days ago By: Bob La Londe
CAD - offer my comment on AutoCAD and Solidworks By: Richard Smith on Sun, 11 Sep 2022	3	8 Months 19 Days ago By: Jim Wilkins
Re: Kitchen egsaust hood--any tips? By: Dawson v on Fri, 9 Sep 2022	0	8 Months 21 Days ago By: Dawson v
Dalton Lathe. By: Robert Walpole on Mon, 5 Sep 2022	4	8 Months 24 Days ago By: Jim Wilkins
Ali GMAW - defect rates - spray, pulse By: Richard Smith on Fri, 26 Aug 2022	34	8 Months 25 Days ago By: Richard Smith
Re: Unsticking a diesel pump By: Jparm21 on Sat, 3 Sep 2022	0	8 Months 28 Days ago By: Jparm21
Re: Heliweld arc stabilizer HFAS-1 By: Snah on Thu, 1 Sep 2022	0	8 Months 30 Days ago By: Snah
Use for a broken bandsaw blade?? By: pyotr filipivich on Sat, 20 Aug 2022	66	9 Months ago By: Gerry
O/T "Investigate Torrey Canyon / Pollard Rock wreck circumstances" By: Richard Smith on Sat, 30 Jul 2022	22	9 Months 2 Days ago By: Jim Wilkins
Re: Parts for Powermatic Model 90 Wood Lathe By: DTataryn on Sun, 28 Aug 2022	0	9 Months 3 Days ago By: DTataryn
Dovetail Day ! By: Snag on Fri, 26 Aug 2022	12	9 Months 3 Days ago By: Snag
QCTP By: Snag on Thu, 25 Aug 2022	7	9 Months 5 Days ago By: Jim Wilkins
sleeve By: scopex 12 on Wed, 24 Aug 2022	0	9 Months 7 Days ago By: scopex 12
Re: Can a Syncrowave 250 run from a 60A circuit By: eric on Tue, 23 Aug 2022	0	9 Months 7 Days ago By: eric
Re: How did Ray Keller die? By: Klaus Schadenfreude on Mon, 22 Aug 2022	0	9 Months 8 Days ago By: Klaus Schadenfreude
Re: FS- Atlas 7B metal shaper $700 By: J estes on Sat, 20 Aug 2022	0	9 Months 11 Days ago By: J estes
BUY MADLABS BEST CARTS ONLINE By: ketke...@gmail.com on Thu, 18 Aug 2022	0	9 Months 12 Days ago By: ketke...@gmail.com
Re: Toilet paper re-roller By: Robert Sander on Thu, 11 Aug 2022	0	9 Months 20 Days ago By: Robert Sander
Re: Why choose enameled wire By: Binbin on Wed, 10 Aug 2022	0	9 Months 21 Days ago By: Binbin
Re: Why choose enameled wire By: Binbin on Tue, 9 Aug 2022	1	9 Months 22 Days ago By: Jim Wilkins
motor starndards outside NA By: Cydrome Leader on Sun, 7 Aug 2022	5	9 Months 22 Days ago By: David Billington
Re: Kawasaki KE 100 no spark By: Moto x JR on Mon, 8 Aug 2022	0	9 Months 23 Days ago By: Moto x JR
Re: Why choose enameled wire By: Binbin on Mon, 8 Aug 2022	0	9 Months 23 Days ago By: Binbin
Re: Broom Handle Thread Specs? By: futureman on Sat, 6 Aug 2022	2	9 Months 24 Days ago By: Jim Wilkins
VIDEO Lasar rifle just used? (Ukraine) By: bruce bowser on Sat, 6 Aug 2022	0	9 Months 24 Days ago By: bruce bowser
Re: Why choose enameled wire By: Binbin on Fri, 5 Aug 2022	0	9 Months 26 Days ago By: Binbin
Re: Steel Shot blasting steel dust cannot be recycled??? By: GregRip on Thu, 4 Aug 2022	0	9 Months 26 Days ago By: GregRip
Re: Home built gun bluing tanks? By: Ken on Thu, 4 Aug 2022	0	9 Months 27 Days ago By: Ken
cleaning permanent magnets By: bob prohaska on Sun, 31 Jul 2022	8	9 Months 29 Days ago By: bob prohaska
Re: cleaning inside a hub dynamo By: bob prohaska on Mon, 1 Aug 2022	1	9 Months 29 Days ago By: Frank Krygowski
TX Trump Rioter Blackmailed Own Kids By: bruce bowser on Mon, 1 Aug 2022	0	9 Months 29 Days ago By: bruce bowser
Re: Dalton Lathes By: Tomas on Mon, 1 Aug 2022	0	9 Months 29 Days ago By: Tomas
Re: NRA knife made in China By: zalewskim123 on Sun, 19 Jul 2020	1	9 Months 30 Days ago By: Benjamin Baker
Connection Problem By: Russell E. Libby on Wed, 27 Jul 2022	6	10 Months 1 Day ago By: Clare Snyder
Shipping w/ McMaster-Carr By: Bob La Londe on Sat, 30 Jul 2022	0	10 Months 1 Day ago By: Bob La Londe
Re: Heller Staples By: Cherokee Jess on Fri, 29 Jul 2022	0	10 Months 2 Days ago By: Cherokee Jess
36 mm 8 point box wrench By: bob prohaska on Mon, 25 Jul 2022	16	10 Months 2 Days ago By: Jim Wilkins
Re: The GEET fuel processor By: buddyLuh on Fri, 22 Jul 2022	1	10 Months 8 Days ago By: Jim Wilkins
Re: Chinese Diesel Generator By: Carl F. on Fri, 22 Jul 2022	1	10 Months 9 Days ago By: Jim Wilkins
Re: The GEET fuel processor By: buddyLuh on Fri, 22 Jul 2022	0	10 Months 9 Days ago By: Carl F.
Re: DRO - Shooting star scales Q By: Liam Jackson on Thu, 14 Jul 2022	0	10 Months 16 Days ago By: Liam Jackson
Re: How to remove protective cover on Lexan? By: JenG. on Thu, 14 Jul 2022	0	10 Months 16 Days ago By: Liam Jackson
Re: Dalton Lathes By: Joe on Thu, 14 Jul 2022	0	10 Months 16 Days ago By: Liam Jackson
Krikit belt tension gauge By: Jim Wilkins on Mon, 11 Jul 2022	0	10 Months 20 Days ago By: Jim Wilkins
O/T - diesel car - "modern" car why extra 30+percent fuel consumption? By: Richard Smith on Mon, 30 May 2022	31	10 Months 22 Days ago By: David Lesher
Harmonic balancer By: Jim Wilkins on Thu, 30 Jun 2022	5	10 Months 30 Days ago By: Jim Wilkins
Help optimizing CNC lathe part By: Dean Verhoeven on Wed, 15 Jun 2022	13	11 Months 1 Day ago By: Cydrome Leader
Richard's Moment By: Bob La Londe on Sun, 19 Jun 2022	2	11 Months 11 Days ago By: Jim Wilkins
3D Revolution? By: Darren Harris on Sun, 7 Nov 2021	16	11 Months 11 Days ago By: Bob La Londe
Stripper Disc: Getting More First Minutes Out of A Flap Disc By: Bob La Londe on Sat, 14 May 2022	13	11 Months 12 Days ago By: Bob La Londe
Re: Sellers 1G drill Grinder parts? By: Trevor Lawrence on Fri, 17 Jun 2022	0	11 Months 14 Days ago By: Brian230
Re: Sellers 1G drill Grinder parts? By: Trevor Lawrence on Fri, 17 Jun 2022	0	11 Months 14 Days ago By: Trevor Lawrence
Suitable for a countershaft ? By: Snag on Sat, 11 Jun 2022	13	11 Months 17 Days ago By: Snag

Pages:12 3 4 5 6 7 8 9

There are currently 11 users online
Total messages: 3,468,246

rocksolid light 0.8.3
clearnet i2p tor

Finagle's Creed: Science is true. Don't be misled by facts.

tech / rec.crafts.metalworking

There are currently 11 users online Total messages: 3,468,246

There are currently 11 users online
Total messages: 3,468,246