On 7/3/2022 12:02 PM, Noddy wrote:
> On 3/07/2022 11:29 am, JONZ wrote:
>> On 7/2/2022 9:13 PM, Noddy wrote:
>
>>>>> On a more amusing note, apparently he has no idea that "John
>>>>> Hinton" is actually JONZ :)
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>
>>> Yeah, I've been having trouble with it here too. Been hit and miss
>>> with both sending and receiving posts.
>>>
>>> Still haven't worked out how to use it to delete posts from Google
>>> Groups though :)
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> Ask kryppy, he knows *all* about the process. :)))
>
> He knows lots of things. Just ask him. It's just a shame that he can't
> convince anyone around here that he does :)
~~~~~~~~~~~~~~~~~~~~~~~~~~

Yep, While you`re here if you or any other Melbourne ppl see this
truck anywhere. call the plod.
Is reported stolen,a mate has been severely ripped off involving a
shift from Moruya to Melbourne. long story involving a bloke named barry
King from Cowes.
>
>

On 3/07/2022 3:39 pm, JONZ wrote:
> On 7/3/2022 12:02 PM, Noddy wrote:
>> On 3/07/2022 11:29 am, JONZ wrote:
>>> On 7/2/2022 9:13 PM, Noddy wrote:
>>
>>>>>> On a more amusing note, apparently he has no idea that "John
>>>>>> Hinton" is actually JONZ :)
>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>>
>>>> Yeah, I've been having trouble with it here too. Been hit and miss
>>>> with both sending and receiving posts.
>>>>
>>>> Still haven't worked out how to use it to delete posts from Google
>>>> Groups though :)
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>> Ask kryppy, he knows *all* about the process. :)))
>>
>> He knows lots of things. Just ask him. It's just a shame that he can't
>> convince anyone around here that he does :)
> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>  Yep, While you`re here if you or any other Melbourne ppl see this
> truck anywhere. call the plod.
>   Is reported stolen,a mate has been severely ripped off involving a
> shift from Moruya to Melbourne. long story involving a bloke named barry
> King from Cowes.

Haven't seen it but I'll let you know if I do.

--
--
--
Regards,
Noddy.

On 7/3/2022 4:11 PM, Noddy wrote:
> On 3/07/2022 3:39 pm, JONZ wrote:
>> On 7/3/2022 12:02 PM, Noddy wrote:
>>> On 3/07/2022 11:29 am, JONZ wrote:
>>>> On 7/2/2022 9:13 PM, Noddy wrote:
>>>
>>>>>>> On a more amusing note, apparently he has no idea that "John
>>>>>>> Hinton" is actually JONZ :)
>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>>>
>>>>> Yeah, I've been having trouble with it here too. Been hit and miss
>>>>> with both sending and receiving posts.
>>>>>
>>>>> Still haven't worked out how to use it to delete posts from Google
>>>>> Groups though :)
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> Ask kryppy, he knows *all* about the process. :)))
>>>
>>> He knows lots of things. Just ask him. It's just a shame that he
>>> can't convince anyone around here that he does :)
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>>   Yep, While you`re here if you or any other Melbourne ppl see this
>> truck anywhere. call the plod.
>>    Is reported stolen,a mate has been severely ripped off involving a
>> shift from Moruya to Melbourne. long story involving a bloke named
>> barry King from Cowes.
>
> Haven't seen it but I'll let you know if I do.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks, I`m not involved personally, but Jazz is a friend of mine, and
thru a series of events she is out of pocket to the tune of thousands
(so far) I don`t know anyone involved ('Cept Jazz) and she dos`nt
deserve any of it.... Truck reg. Vic 1QL 5UD. Cheaper car rental. Melbourne
>

https://mail.google.com/mail/u/0?ui=2&ik=6fab5cb1f5&attid=0.4&permmsgid=msg-f:1737303633038445976&th=181c24731a408d98&view=att&disp=safe

On 3/7/2022 6:02 pm, JONZ wrote:
> On 7/3/2022 4:11 PM, Noddy wrote:
>> On 3/07/2022 3:39 pm, JONZ wrote:
>>> On 7/3/2022 12:02 PM, Noddy wrote:
>>>> On 3/07/2022 11:29 am, JONZ wrote:
>>>>> On 7/2/2022 9:13 PM, Noddy wrote:
>>>>
>>>>>>>> On a more amusing note, apparently he has no idea that "John
>>>>>>>> Hinton" is actually JONZ :)
>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>>>>
>>>>>> Yeah, I've been having trouble with it here too. Been hit and miss
>>>>>> with both sending and receiving posts.
>>>>>>
>>>>>> Still haven't worked out how to use it to delete posts from Google
>>>>>> Groups though :)
>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>> Ask kryppy, he knows *all* about the process. :)))
>>>>
>>>> He knows lots of things. Just ask him. It's just a shame that he
>>>> can't convince anyone around here that he does :)
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>>   Yep, While you`re here if you or any other Melbourne ppl see this
>>> truck anywhere. call the plod.
>>>    Is reported stolen,a mate has been severely ripped off involving a
>>> shift from Moruya to Melbourne. long story involving a bloke named
>>> barry King from Cowes.
>>
>> Haven't seen it but I'll let you know if I do.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  Thanks, I`m not involved personally, but Jazz is a friend of mine, and
> thru a series of events she is out of pocket to the tune of thousands
> (so far) I don`t know anyone involved ('Cept Jazz) and she dos`nt
> deserve any of it....  Truck reg. Vic 1QL 5UD. Cheaper car rental.
> Melbourne
>>
>
> https://mail.google.com/mail/u/0?ui=2&ik=6fab5cb1f5&attid=0.4&permmsgid=msg-f:1737303633038445976&th=181c24731a408d98&view=att&disp=safe
>

Don't know if that link is supposed to have details but I clicked on it
and nothing?
2016 White Fuso van which shows up as stolen on the Vic Roads rego check
site?

--
Daryl

On 1/07/2022 11:26 am, Augustus Flavius Maximus wrote:
> On 1/07/2022 12:17 pm, keithr0 wrote:
>> On 30/06/2022 10:49 pm, Yosemite Sam wrote:
>>> On 30/06/2022 10:14 pm, keithr0 wrote:
>>>> On 30/06/2022 3:52 pm, Yosemite Sam wrote:
>>>>> On 30/06/2022 2:01 pm, keithr0 wrote:
>>>>>> On 17/06/2022 4:10 pm, Noddy wrote:
>>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>>>>> On 14/06/2022 7:47 pm, Noddy wrote:
>>>>>>>
>>>>>>>>>> Nope, I choose to do "The hard yards" because it is more
>>>>>>>>>> interesting than monkey see monkey do, but I suppose that if
>>>>>>>>>> that is all you can manage then that's what you have to be
>>>>>>>>>> content with. Do you get some sense of achievement copying
>>>>>>>>>> other peoples work into the flash memory of and Arduino then?
>>>>>>>>>
>>>>>>>>> It's a tool Keith, and you use whatever you need to in order to
>>>>>>>>> get the job done.
>>>>>>>>>
>>>>>>>>> Only a complete moron ever does things the hard way.
>>>>>>>>
>>>>>>>> So why are you fixing up a bodged up restoration of an old
>>>>>>>> truck, when you could have bought a far better one for the same
>>>>>>>> or less money, and zero effort.
>>>>>>>
>>>>>>> You're trying to turn two arguments into one here, and I thought
>>>>>>> I explained this to you yesterday but apparently you didn't get
>>>>>>> it so I'll try a different approach.
>>>>>>>
>>>>>>> The truck in question is a 1956 Ford F-100 which, in terms of
>>>>>>> classic pickup trucks, is one of the most sought after models you
>>>>>>> can find and especially in factory right hand drive as this one
>>>>>>> here is. There are certainly some things about it that I don't
>>>>>>> like, which is largely the difference in personal taste between
>>>>>>> myself and the previous owner, but calling it "bodged up" is
>>>>>>> being inventive. The thing hasn't been done to *my* standard and
>>>>>>> it will be eventually, but for now it's a running, driving truck
>>>>>>> that I use most week-ends.
>>>>>>>
>>>>>>> Your claim that I could have bought a better one for "the same or
>>>>>>> less money, and zero effort" is complete fantasy though, and just
>>>>>>> shows that you have no idea what you're talking about. What I
>>>>>>> paid for this truck, which was 50 grand delivered to my door from
>>>>>>> the Snowy region of NSW, was an excellent buy that would be
>>>>>>> difficult to find anywhere else, and in fact I'll declare here
>>>>>>> and now that I will happily buy every right hand drive 1956 F-100
>>>>>>> that you can find in running condition for 50 grand or less.
>>>>>>>
>>>>>>> You apparently like challenges, Keith, so go ahead. Look around.
>>>>>>> Come up with some examples of where I could have done better.
>>>>>>> I'll get my cheque book out. Shit, I'll even pay you 5%
>>>>>>> commission on every one you can find.
>>>>>>>
>>>>>>>> I suspect that the answer is because you enjoy doing it,
>>>>>>>
>>>>>>> I've been restoring cars since I was a kid, and have done many.
>>>>>>> Sometimes it's all about the individual vehicle, and sometimes
>>>>>>> it's about the historical aspect behind it. For example, one of
>>>>>>> the vehicles I always wanted as a young kid was a WWII Jeep, and
>>>>>>> about 25 years ago I bought and restored one. I spent around 4
>>>>>>> years doing that part time, and in the end I sold it to a bloke
>>>>>>> who runs a private military vehicle museum in Kerang in Victoria
>>>>>>> about 6 months after it was completed because for me the buzz of
>>>>>>> restoring the thing wasn't so much about the driving it around
>>>>>>> afterwards as it was about the history lesson associated with
>>>>>>> bringing it back to life.
>>>>>>>
>>>>>>> It's still in Kerang apparently where it does it's parade duty
>>>>>>> every Anzac day, but prior to me restoring it it spent 40 years
>>>>>>> or so lying on it's side in a wrecking yard buried under a pile
>>>>>>> of panels being used as a dog kennel.
>>>>>>>
>>>>>>> I enjoy doing the work and I'm pretty good at it. I have a fairly
>>>>>>> extensive skill set where I'm capable of doing virtually
>>>>>>> everything other than interior trim, and to a fairly high
>>>>>>> standard. I'm also fairly fortunate in that for many years I've
>>>>>>> been lucky enough to have the facilities and equipment to be able
>>>>>>> to carry out such work.
>>>>>>>
>>>>>>> Do I get a buzz out of it? Sometimes. Sometimes it's very
>>>>>>> satisfying, but sometimes it's just work.
>>>>>>
>>>>>> So, like I said, you do it because you enjoy it.
>>>>>>
>>>>>>>> same as some people enjoy hitting a little ball around a paddock
>>>>>>>> with a stick, and I enjoy the challenge of creating software and
>>>>>>>> fixing up old aircraft.
>>>>>>>
>>>>>>> Whatever floats your boat Keith.
>>>>>>>
>>>>>>> I wasn't attacking you or what you were doing, but I was curious
>>>>>>> as to why you and your mates were bothering with a task that you
>>>>>>> clearly found to be somewhat complicated when there was no "end
>>>>>>> game" involved. As I said, the engine is never going to run and
>>>>>>> if you buttoned up the covers and put a "dust panel" over the
>>>>>>> intake most visitors would probably not know if the engine was
>>>>>>> fitted or not.
>>>>>>
>>>>>> Most visitors would not have a clue, although those that do would
>>>>>> likely be critics if something was wrong. The engine pod will be
>>>>>> displayed open on open days, just as we open the cowls on the
>>>>>> piston engines so that the visitors can see what a big radial
>>>>>> looks like. The visitors like that, which adds to the satisfaction
>>>>>> of having done something properly.
>>>>>>
>>>>>> I am sure that, when you restored your Jeep, there were shortcuts
>>>>>> that you could have taken, but didn't, because that wouldn't have
>>>>>> been doing a proper job.
>>>>>>
>>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>>> can't understand the logic of doing something for *nothing* which
>>>>>>> to me seemed like what you and your mates were doing.
>>>>>>>
>>>>>>>>> So you never have to revert to any kind of documentation or
>>>>>>>>> instruction from anyone, and instead do it *all* yourself.
>>>>>>>>>
>>>>>>>>> Own any workshop manuals, do you?
>>>>>>>>
>>>>>>>> I have a workshop manual for the MX-5, for the aircraft, it
>>>>>>>> would be pointless. Mounting the engine, for instance, the
>>>>>>>> manual, if we had one, would likely say to use Lockheed special
>>>>>>>> tool xyz123 revision 6, something which we don't have and are
>>>>>>>> never likely to have. So we just work it out for ourselves.
>>>>>>>
>>>>>>> The point I was getting at is that whether you use a workshop
>>>>>>> manual, a technical service bulletin, someone else's prior
>>>>>>> experiences or a Youtube video, you're relying on an external
>>>>>>> source to make your task easier and in that sense it is not the
>>>>>>> slightest bit different to using a bunch of code from a free
>>>>>>> share library to get your job done.
>>>>>>
>>>>>> Manuals help if they are available, currently as a side job for
>>>>>> the museum I'm restoring a 1942 Norden bombsight for which I have
>>>>>> a manual. Unfortunately the manual is for an M3 model, this one is
>>>>>> an M9, it doesn't matter, if you've got a reasonable grasp on how
>>>>>> things work, you should be able to work it out and learn something
>>>>>> along the way.
>>>>>
>>>>>
>>>>> so 'transferred experience' then as described by Xeno
>>>>
>>>> What the fuck are you babbling about? Nothing to do with
>>>> "Transferred experience" whatever that may be. It's a case of having
>>>> enough brains to work things out as you experience them.
>>>
>>>
>>> Xeno once mentioned how when you have experience in a particular
>>> field of endeavor you can use that knowledge and skill in other areas
>>> that require similar knowledge and skill, even tho you don't have
>>> hands on experience in the other area, and he dubbed this
>>> 'transferred experience'. It's obvious to anyone with any sense, but
>>> noddyliar rubbished the idea.
>>
>> So, because I learned to use a screwdriver as a kid building billy
>> carts, now, when it use one to open a computer or such, I'm using
>> "Transferred experience". You must be joking.
>
>
> It's Xeno's expression. I just explained it to you. i'm beginning to
> think i need to dumb down my comments when replying to you so you can
> understand them.

On 4/07/2022 6:59 pm, Clocky wrote:
> On 1/07/2022 11:26 am, Augustus Flavius Maximus wrote:
>> On 1/07/2022 12:17 pm, keithr0 wrote:
>>> On 30/06/2022 10:49 pm, Yosemite Sam wrote:
>>>> On 30/06/2022 10:14 pm, keithr0 wrote:
>>>>> On 30/06/2022 3:52 pm, Yosemite Sam wrote:
>>>>>> On 30/06/2022 2:01 pm, keithr0 wrote:
>>>>>>> On 17/06/2022 4:10 pm, Noddy wrote:
>>>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>>>>>> On 14/06/2022 7:47 pm, Noddy wrote:
>>>>>>>>
>>>>>>>>>>> Nope, I choose to do "The hard yards" because it is more
>>>>>>>>>>> interesting than monkey see monkey do, but I suppose that if
>>>>>>>>>>> that is all you can manage then that's what you have to be
>>>>>>>>>>> content with. Do you get some sense of achievement copying
>>>>>>>>>>> other peoples work into the flash memory of and Arduino then?
>>>>>>>>>>
>>>>>>>>>> It's a tool Keith, and you use whatever you need to in order
>>>>>>>>>> to get the job done.
>>>>>>>>>>
>>>>>>>>>> Only a complete moron ever does things the hard way.
>>>>>>>>>
>>>>>>>>> So why are you fixing up a bodged up restoration of an old
>>>>>>>>> truck, when you could have bought a far better one for the same
>>>>>>>>> or less money, and zero effort.
>>>>>>>>
>>>>>>>> You're trying to turn two arguments into one here, and I thought
>>>>>>>> I explained this to you yesterday but apparently you didn't get
>>>>>>>> it so I'll try a different approach.
>>>>>>>>
>>>>>>>> The truck in question is a 1956 Ford F-100 which, in terms of
>>>>>>>> classic pickup trucks, is one of the most sought after models
>>>>>>>> you can find and especially in factory right hand drive as this
>>>>>>>> one here is. There are certainly some things about it that I
>>>>>>>> don't like, which is largely the difference in personal taste
>>>>>>>> between myself and the previous owner, but calling it "bodged
>>>>>>>> up" is being inventive. The thing hasn't been done to *my*
>>>>>>>> standard and it will be eventually, but for now it's a running,
>>>>>>>> driving truck that I use most week-ends.
>>>>>>>>
>>>>>>>> Your claim that I could have bought a better one for "the same
>>>>>>>> or less money, and zero effort" is complete fantasy though, and
>>>>>>>> just shows that you have no idea what you're talking about. What
>>>>>>>> I paid for this truck, which was 50 grand delivered to my door
>>>>>>>> from the Snowy region of NSW, was an excellent buy that would be
>>>>>>>> difficult to find anywhere else, and in fact I'll declare here
>>>>>>>> and now that I will happily buy every right hand drive 1956
>>>>>>>> F-100 that you can find in running condition for 50 grand or less.
>>>>>>>>
>>>>>>>> You apparently like challenges, Keith, so go ahead. Look around.
>>>>>>>> Come up with some examples of where I could have done better.
>>>>>>>> I'll get my cheque book out. Shit, I'll even pay you 5%
>>>>>>>> commission on every one you can find.
>>>>>>>>
>>>>>>>>> I suspect that the answer is because you enjoy doing it,
>>>>>>>>
>>>>>>>> I've been restoring cars since I was a kid, and have done many.
>>>>>>>> Sometimes it's all about the individual vehicle, and sometimes
>>>>>>>> it's about the historical aspect behind it. For example, one of
>>>>>>>> the vehicles I always wanted as a young kid was a WWII Jeep, and
>>>>>>>> about 25 years ago I bought and restored one. I spent around 4
>>>>>>>> years doing that part time, and in the end I sold it to a bloke
>>>>>>>> who runs a private military vehicle museum in Kerang in Victoria
>>>>>>>> about 6 months after it was completed because for me the buzz of
>>>>>>>> restoring the thing wasn't so much about the driving it around
>>>>>>>> afterwards as it was about the history lesson associated with
>>>>>>>> bringing it back to life.
>>>>>>>>
>>>>>>>> It's still in Kerang apparently where it does it's parade duty
>>>>>>>> every Anzac day, but prior to me restoring it it spent 40 years
>>>>>>>> or so lying on it's side in a wrecking yard buried under a pile
>>>>>>>> of panels being used as a dog kennel.
>>>>>>>>
>>>>>>>> I enjoy doing the work and I'm pretty good at it. I have a
>>>>>>>> fairly extensive skill set where I'm capable of doing virtually
>>>>>>>> everything other than interior trim, and to a fairly high
>>>>>>>> standard. I'm also fairly fortunate in that for many years I've
>>>>>>>> been lucky enough to have the facilities and equipment to be
>>>>>>>> able to carry out such work.
>>>>>>>>
>>>>>>>> Do I get a buzz out of it? Sometimes. Sometimes it's very
>>>>>>>> satisfying, but sometimes it's just work.
>>>>>>>
>>>>>>> So, like I said, you do it because you enjoy it.
>>>>>>>
>>>>>>>>> same as some people enjoy hitting a little ball around a
>>>>>>>>> paddock with a stick, and I enjoy the challenge of creating
>>>>>>>>> software and fixing up old aircraft.
>>>>>>>>
>>>>>>>> Whatever floats your boat Keith.
>>>>>>>>
>>>>>>>> I wasn't attacking you or what you were doing, but I was curious
>>>>>>>> as to why you and your mates were bothering with a task that you
>>>>>>>> clearly found to be somewhat complicated when there was no "end
>>>>>>>> game" involved. As I said, the engine is never going to run and
>>>>>>>> if you buttoned up the covers and put a "dust panel" over the
>>>>>>>> intake most visitors would probably not know if the engine was
>>>>>>>> fitted or not.
>>>>>>>
>>>>>>> Most visitors would not have a clue, although those that do would
>>>>>>> likely be critics if something was wrong. The engine pod will be
>>>>>>> displayed open on open days, just as we open the cowls on the
>>>>>>> piston engines so that the visitors can see what a big radial
>>>>>>> looks like. The visitors like that, which adds to the
>>>>>>> satisfaction of having done something properly.
>>>>>>>
>>>>>>> I am sure that, when you restored your Jeep, there were shortcuts
>>>>>>> that you could have taken, but didn't, because that wouldn't have
>>>>>>> been doing a proper job.
>>>>>>>
>>>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>>>> can't understand the logic of doing something for *nothing*
>>>>>>>> which to me seemed like what you and your mates were doing.
>>>>>>>>
>>>>>>>>>> So you never have to revert to any kind of documentation or
>>>>>>>>>> instruction from anyone, and instead do it *all* yourself.
>>>>>>>>>>
>>>>>>>>>> Own any workshop manuals, do you?
>>>>>>>>>
>>>>>>>>> I have a workshop manual for the MX-5, for the aircraft, it
>>>>>>>>> would be pointless. Mounting the engine, for instance, the
>>>>>>>>> manual, if we had one, would likely say to use Lockheed special
>>>>>>>>> tool xyz123 revision 6, something which we don't have and are
>>>>>>>>> never likely to have. So we just work it out for ourselves.
>>>>>>>>
>>>>>>>> The point I was getting at is that whether you use a workshop
>>>>>>>> manual, a technical service bulletin, someone else's prior
>>>>>>>> experiences or a Youtube video, you're relying on an external
>>>>>>>> source to make your task easier and in that sense it is not the
>>>>>>>> slightest bit different to using a bunch of code from a free
>>>>>>>> share library to get your job done.
>>>>>>>
>>>>>>> Manuals help if they are available, currently as a side job for
>>>>>>> the museum I'm restoring a 1942 Norden bombsight for which I have
>>>>>>> a manual. Unfortunately the manual is for an M3 model, this one
>>>>>>> is an M9, it doesn't matter, if you've got a reasonable grasp on
>>>>>>> how things work, you should be able to work it out and learn
>>>>>>> something along the way.
>>>>>>
>>>>>>
>>>>>> so 'transferred experience' then as described by Xeno
>>>>>
>>>>> What the fuck are you babbling about? Nothing to do with
>>>>> "Transferred experience" whatever that may be. It's a case of
>>>>> having enough brains to work things out as you experience them.
>>>>
>>>>
>>>> Xeno once mentioned how when you have experience in a particular
>>>> field of endeavor you can use that knowledge and skill in other
>>>> areas that require similar knowledge and skill, even tho you don't
>>>> have hands on experience in the other area, and he dubbed this
>>>> 'transferred experience'. It's obvious to anyone with any sense, but
>>>> noddyliar rubbished the idea.
>>>
>>> So, because I learned to use a screwdriver as a kid building billy
>>> carts, now, when it use one to open a computer or such, I'm using
>>> "Transferred experience". You must be joking.
>>
>>
>> It's Xeno's expression. I just explained it to you. i'm beginning to
>> think i need to dumb down my comments when replying to you so you can
>> understand them.
>
> keith is either trolling or losing it.

On 1/07/2022 7:42 pm, Noddy wrote:
> On 1/07/2022 5:36 pm, john` hinton wrote:
>> On 6/17/2022 4:10 PM, Noddy wrote:
>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>
>>>
>>> If doing that kind of stuff blows your skirt up then fine, but I
>>> can't understand the logic of doing something for *nothing* which to
>>> me seemed like what you and your mates were doing.
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> Volunteering is an excellent use of time. Doing *something for
>> nothing*   can be of immense value to you and your community. In fact
>> many organisations would be hard pressed to operate without their
>> volunteers...
>
> Fair comment, and as I said I wasn't criticising doing it. I just
> thought that given there is no hope of the engine ever running again
> that it couldn't be put to a better use by putting it in a stand where
> people could see it up close, and perhaps partially dissected so people
> could see the internal workings.
>
> At the end of the day how they run their museum is totally up to them.
>
>

And the sociopath backs up in fear of losing an ally. Go on Jonzie, ask
him about proving his claims of being qualified and see where that gets
you. Or are you OK with him flat out lying about being qualified?

--
keith on the 7 Oct 2021 wrote;
"He asserts that the claim is true, so, if
it is unproven, he is lying."

On 7/4/2022 8:50 PM, Clocky wrote:
> On 1/07/2022 7:42 pm, Noddy wrote:
>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>
>>>>
>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>> can't understand the logic of doing something for *nothing* which to
>>>> me seemed like what you and your mates were doing.
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>> Volunteering is an excellent use of time. Doing *something for
>>> nothing*   can be of immense value to you and your community. In fact
>>> many organisations would be hard pressed to operate without their
>>> volunteers...
>>
>> Fair comment, and as I said I wasn't criticising doing it. I just
>> thought that given there is no hope of the engine ever running again
>> that it couldn't be put to a better use by putting it in a stand where
>> people could see it up close, and perhaps partially dissected so
>> people could see the internal workings.
>>
>> At the end of the day how they run their museum is totally up to them.
>>
>>
>
>
> And the sociopath backs up in fear of losing an ally. Go on Jonzie, ask
> him about proving his claims of being qualified and see where that gets
> you. Or are you OK with him flat out lying about being qualified?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As I have said *over and over* I don`t care!. Get *that* through
your thick bonce, troll boi!!!!....
>

On 4/07/2022 8:50 pm, Clocky wrote:
> On 1/07/2022 7:42 pm, Noddy wrote:
>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>
>>>>
>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>> can't understand the logic of doing something for *nothing* which
>>>> to me seemed like what you and your mates were doing.
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>> Volunteering is an excellent use of time. Doing *something for
>>> nothing*   can be of immense value to you and your community. In
>>> fact many organisations would be hard pressed to operate without
>>> their volunteers...
>>
>> Fair comment, and as I said I wasn't criticising doing it. I just
>> thought that given there is no hope of the engine ever running again
>> that it couldn't be put to a better use by putting it in a stand
>> where people could see it up close, and perhaps partially dissected
>> so people could see the internal workings.
>>
>> At the end of the day how they run their museum is totally up to them.
>>
>>
>
>
> And the sociopath backs up in fear of losing an ally.

yes, treating him with kid gloves, lol :)

> Go on Jonzie, ask him about proving his claims of being qualified and
> see where that gets you. Or are you OK with him flat out lying about
> being qualified?
>

nah, he won't. noddy is the only 'friend' he has here now :)

--
https://tinyurl.com/Yosemite-Sam

"a typical noddy post. all insult, criticism, and abuse while
snipping and ignoring the facts of the matter" -felix on noddy

FUCK PUTIN!!

On 4/07/2022 9:20 pm, JONZ wrote:
> On 7/4/2022 8:50 PM, Clocky wrote:
>> On 1/07/2022 7:42 pm, Noddy wrote:
>>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>
>>>>>
>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>> can't understand the logic of doing something for *nothing* which
>>>>> to me seemed like what you and your mates were doing.
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>
>>>> Volunteering is an excellent use of time. Doing *something for
>>>> nothing*   can be of immense value to you and your community. In
>>>> fact many organisations would be hard pressed to operate without
>>>> their volunteers...
>>>
>>> Fair comment, and as I said I wasn't criticising doing it. I just
>>> thought that given there is no hope of the engine ever running again
>>> that it couldn't be put to a better use by putting it in a stand
>>> where people could see it up close, and perhaps partially dissected
>>> so people could see the internal workings.
>>>
>>> At the end of the day how they run their museum is totally up to them.
>>>
>>>
>>
>>
>> And the sociopath backs up in fear of losing an ally. Go on Jonzie,
>> ask him about proving his claims of being qualified and see where
>> that gets you. Or are you OK with him flat out lying about being
>> qualified?
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  As I have said *over and over*  I don`t  care!. Get *that* through
> your thick bonce, troll boi!!!!....

there ya go clocky. jonzie doesn't care if ppl are liars, especially his
new found BFF

--
https://tinyurl.com/Yosemite-Sam

"a typical noddy post. all insult, criticism, and abuse while
snipping and ignoring the facts of the matter" -felix on noddy

FUCK PUTIN!!

On Mon, 4 Jul 2022 23:27:03 +1000, Yosemite Sam wrote:

> On 4/07/2022 9:20 pm, JONZ wrote:
>> On 7/4/2022 8:50 PM, Clocky wrote:
>>> On 1/07/2022 7:42 pm, Noddy wrote:
>>>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>
>>>>>>
>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>> can't understand the logic of doing something for *nothing* which
>>>>>> to me seemed like what you and your mates were doing.
>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>
>>>>> Volunteering is an excellent use of time. Doing *something for
>>>>> nothing*   can be of immense value to you and your community. In
>>>>> fact many organisations would be hard pressed to operate without
>>>>> their volunteers...
>>>>
>>>> Fair comment, and as I said I wasn't criticising doing it. I just
>>>> thought that given there is no hope of the engine ever running again
>>>> that it couldn't be put to a better use by putting it in a stand
>>>> where people could see it up close, and perhaps partially dissected
>>>> so people could see the internal workings.
>>>>
>>>> At the end of the day how they run their museum is totally up to them.
>>>>
>>>>
>>>
>>>
>>> And the sociopath backs up in fear of losing an ally. Go on Jonzie,
>>> ask him about proving his claims of being qualified and see where
>>> that gets you. Or are you OK with him flat out lying about being
>>> qualified?
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  As I have said *over and over*  I don`t  care!. Get *that* through
>> your thick bonce, troll boi!!!!....
>
> there ya go clocky. jonzie doesn't care if ppl are liars, especially his
> new found BFF

There's nutters everywhere these days, but I'd be interested in *why* he
"doesn't care" about the Fraudsters lies, hypocrisy & cowardice. The only
reasons I can come up with are brain damage, or that he's the descendant of
an undetected Nazi war criminal.

alvey

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

On 5/07/2022 6:56 am, alvey wrote:
> On Mon, 4 Jul 2022 23:27:03 +1000, Yosemite Sam wrote:
>
>> On 4/07/2022 9:20 pm, JONZ wrote:
>>> On 7/4/2022 8:50 PM, Clocky wrote:
>>>> On 1/07/2022 7:42 pm, Noddy wrote:
>>>>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>>>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>>> can't understand the logic of doing something for *nothing* which
>>>>>>> to me seemed like what you and your mates were doing.
>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>
>>>>>> Volunteering is an excellent use of time. Doing *something for
>>>>>> nothing*   can be of immense value to you and your community. In
>>>>>> fact many organisations would be hard pressed to operate without
>>>>>> their volunteers...
>>>>> Fair comment, and as I said I wasn't criticising doing it. I just
>>>>> thought that given there is no hope of the engine ever running again
>>>>> that it couldn't be put to a better use by putting it in a stand
>>>>> where people could see it up close, and perhaps partially dissected
>>>>> so people could see the internal workings.
>>>>>
>>>>> At the end of the day how they run their museum is totally up to them.
>>>>>
>>>>>
>>>>
>>>> And the sociopath backs up in fear of losing an ally. Go on Jonzie,
>>>> ask him about proving his claims of being qualified and see where
>>>> that gets you. Or are you OK with him flat out lying about being
>>>> qualified?
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>  As I have said *over and over*  I don`t  care!. Get *that* through
>>> your thick bonce, troll boi!!!!....
>> there ya go clocky. jonzie doesn't care if ppl are liars, especially his
>> new found BFF
> There's nutters everywhere these days, but I'd be interested in *why* he
> "doesn't care" about the Fraudsters lies, hypocrisy & cowardice.

cos he wants to be his BFF? cos he's dishonest too? birds of a feather, and all that..

> The only reasons I can come up with are brain damage,

that's a given

> or that he's the descendant of
> an undetected Nazi war criminal.
>

possible. or perhaps the mutant offspring of some unholy sexual union?  :)

>
> alvey
>

--
https://tinyurl.com/Yosemite-Sam

"once again the dickhead in Coward Castle snipes from behind his
killfile which is all he's capable of doing" -felix on noddy

"a typical noddy post. all insult, criticism, and abuse while
snipping and ignoring the facts of the matter" -felix on noddy

"Whinge, moan, bleat, complain. Oh, and of course, lie. Just
another typical post from a proven liar, hypocrite, fraud and
coward"-alvey on noddy

"You got a specific response from me, absolutely chocker with facts,
and look what you came back with. A tired and inappropriate one line
cliche. You are a moral, creative and intellectual desert keith"
-alvey on Keefy

FUCK PUTIN!!

On 4/07/2022 9:27 pm, Yosemite Sam wrote:
> On 4/07/2022 9:20 pm, JONZ wrote:
>> On 7/4/2022 8:50 PM, Clocky wrote:
>>> On 1/07/2022 7:42 pm, Noddy wrote:
>>>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>
>>>>>>
>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>> can't understand the logic of doing something for *nothing* which
>>>>>> to me seemed like what you and your mates were doing.
>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>
>>>>> Volunteering is an excellent use of time. Doing *something for
>>>>> nothing*   can be of immense value to you and your community. In
>>>>> fact many organisations would be hard pressed to operate without
>>>>> their volunteers...
>>>>
>>>> Fair comment, and as I said I wasn't criticising doing it. I just
>>>> thought that given there is no hope of the engine ever running again
>>>> that it couldn't be put to a better use by putting it in a stand
>>>> where people could see it up close, and perhaps partially dissected
>>>> so people could see the internal workings.
>>>>
>>>> At the end of the day how they run their museum is totally up to them.
>>>>
>>>>
>>>
>>>
>>> And the sociopath backs up in fear of losing an ally. Go on Jonzie,
>>> ask him about proving his claims of being qualified and see where
>>> that gets you. Or are you OK with him flat out lying about being
>>> qualified?
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  As I have said *over and over*  I don`t  care!. Get *that* through
>> your thick bonce, troll boi!!!!....
>
>
> there ya go clocky. jonzie doesn't care if ppl are liars, especially his
> new found BFF
>

Yep, Jonzie doesn't care if people are frauds and liars. I wonder if he
would care if someone lied about having a license to drive a truck and
did it anyway...

--
keith on the 7 Oct 2021 wrote;
"He asserts that the claim is true, so, if
it is unproven, he is lying."

On 5/07/2022 8:19 pm, Clocky wrote:
> On 4/07/2022 9:27 pm, Yosemite Sam wrote:
>> On 4/07/2022 9:20 pm, JONZ wrote:
>>> On 7/4/2022 8:50 PM, Clocky wrote:
>>>> On 1/07/2022 7:42 pm, Noddy wrote:
>>>>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>>>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>>
>>>>>>>
>>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>>> can't understand the logic of doing something for *nothing*
>>>>>>> which to me seemed like what you and your mates were doing.
>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>
>>>>>> Volunteering is an excellent use of time. Doing *something for
>>>>>> nothing*   can be of immense value to you and your community. In
>>>>>> fact many organisations would be hard pressed to operate without
>>>>>> their volunteers...
>>>>>
>>>>> Fair comment, and as I said I wasn't criticising doing it. I just
>>>>> thought that given there is no hope of the engine ever running
>>>>> again that it couldn't be put to a better use by putting it in a
>>>>> stand where people could see it up close, and perhaps partially
>>>>> dissected so people could see the internal workings.
>>>>>
>>>>> At the end of the day how they run their museum is totally up to
>>>>> them.
>>>>>
>>>>>
>>>>
>>>>
>>>> And the sociopath backs up in fear of losing an ally. Go on Jonzie,
>>>> ask him about proving his claims of being qualified and see where
>>>> that gets you. Or are you OK with him flat out lying about being
>>>> qualified?
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>  As I have said *over and over*  I don`t  care!. Get *that* through
>>> your thick bonce, troll boi!!!!....
>>
>>
>> there ya go clocky. jonzie doesn't care if ppl are liars, especially
>> his new found BFF
>>
>
>
> Yep, Jonzie doesn't care if people are frauds and liars.

and he says he doesn't care that his new BFF is a liar cos he doesn't
want to upset him  :)

> I wonder if he would care if someone lied about having a license to
> drive a truck and did it anyway...
>
>

yes. I do care that there are so many unlicensed drivers and
unregistered cars on our roads these days. the standards of behaviour in
society now are so much worse than they once were.

--
https://tinyurl.com/Yosemite-Sam

"once again the dickhead in Coward Castle snipes from behind his
killfile which is all he's capable of doing" -felix on noddy

"a typical noddy post. all insult, criticism, and abuse while
snipping and ignoring the facts of the matter" -felix on noddy

"Whinge, moan, bleat, complain. Oh, and of course, lie. Just
another typical post from a proven liar, hypocrite, fraud and
coward"-alvey on noddy

"You got a specific response from me, absolutely chocker with facts,
and look what you came back with. A tired and inappropriate one line
cliche. You are a moral, creative and intellectual desert keith"
-alvey on Keefy

FUCK PUTIN!!

On 6/07/2022 2:40 pm, Yosemite Sam wrote:
> On 5/07/2022 8:19 pm, Clocky wrote:
>> On 4/07/2022 9:27 pm, Yosemite Sam wrote:
>>> On 4/07/2022 9:20 pm, JONZ wrote:
>>>> On 7/4/2022 8:50 PM, Clocky wrote:
>>>>> On 1/07/2022 7:42 pm, Noddy wrote:
>>>>>> On 1/07/2022 5:36 pm, john` hinton wrote:
>>>>>>> On 6/17/2022 4:10 PM, Noddy wrote:
>>>>>>>> On 17/06/2022 1:55 pm, keithr0 wrote:
>>>>>>
>>>>>>>>
>>>>>>>> If doing that kind of stuff blows your skirt up then fine, but I
>>>>>>>> can't understand the logic of doing something for *nothing*
>>>>>>>> which to me seemed like what you and your mates were doing.
>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>
>>>>>>> Volunteering is an excellent use of time. Doing *something for
>>>>>>> nothing*   can be of immense value to you and your community. In
>>>>>>> fact many organisations would be hard pressed to operate without
>>>>>>> their volunteers...
>>>>>>
>>>>>> Fair comment, and as I said I wasn't criticising doing it. I just
>>>>>> thought that given there is no hope of the engine ever running
>>>>>> again that it couldn't be put to a better use by putting it in a
>>>>>> stand where people could see it up close, and perhaps partially
>>>>>> dissected so people could see the internal workings.
>>>>>>
>>>>>> At the end of the day how they run their museum is totally up to
>>>>>> them.
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> And the sociopath backs up in fear of losing an ally. Go on Jonzie,
>>>>> ask him about proving his claims of being qualified and see where
>>>>> that gets you. Or are you OK with him flat out lying about being
>>>>> qualified?
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>  As I have said *over and over*  I don`t  care!. Get *that* through
>>>> your thick bonce, troll boi!!!!....
>>>
>>>
>>> there ya go clocky. jonzie doesn't care if ppl are liars, especially
>>> his new found BFF
>>>
>>
>>
>> Yep, Jonzie doesn't care if people are frauds and liars.
>
> and he says he doesn't care that his new BFF is a liar cos he doesn't
> want to upset him  :)
>
>
>> I wonder if he would care if someone lied about having a license to
>> drive a truck and did it anyway...
>>
>>
>
> yes. I do care that there are so many unlicensed drivers and
> unregistered cars on our roads these days. the standards of behaviour in
> society now are so much worse than they once were.
>
>

All those uncaring Jonzie types part of the problem.

--
keith on the 7 Oct 2021 wrote;
"He asserts that the claim is true, so, if
it is unproven, he is lying."

On 3/07/2022 7:33 pm, Daryl wrote:
> On 3/7/2022 6:02 pm, JONZ wrote:
>> On 7/3/2022 4:11 PM, Noddy wrote:
>>> On 3/07/2022 3:39 pm, JONZ wrote:
>>>> On 7/3/2022 12:02 PM, Noddy wrote:
>>>>> On 3/07/2022 11:29 am, JONZ wrote:
>>>>>> On 7/2/2022 9:13 PM, Noddy wrote:
>>>>>
>>>>>>>>> On a more amusing note, apparently he has no idea that "John
>>>>>>>>> Hinton" is actually JONZ :)
>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>>>>>
>>>>>>> Yeah, I've been having trouble with it here too. Been hit and
>>>>>>> miss with both sending and receiving posts.
>>>>>>>
>>>>>>> Still haven't worked out how to use it to delete posts from
>>>>>>> Google Groups though :)
>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>> Ask kryppy, he knows *all* about the process. :)))
>>>>>
>>>>> He knows lots of things. Just ask him. It's just a shame that he
>>>>> can't convince anyone around here that he does :)
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>
>>>>   Yep, While you`re here if you or any other Melbourne ppl see this
>>>> truck anywhere. call the plod.
>>>>    Is reported stolen,a mate has been severely ripped off involving
>>>> a shift from Moruya to Melbourne. long story involving a bloke named
>>>> barry King from Cowes.
>>>
>>> Haven't seen it but I'll let you know if I do.
>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>   Thanks, I`m not involved personally, but Jazz is a friend of mine,
>> and thru a series of events she is out of pocket to the tune of
>> thousands (so far) I don`t know anyone involved ('Cept Jazz) and she
>> dos`nt deserve any of it....  Truck reg. Vic 1QL 5UD. Cheaper car
>> rental. Melbourne
>>>
>>
>> https://mail.google.com/mail/u/0?ui=2&ik=6fab5cb1f5&attid=0.4&permmsgid=msg-f:1737303633038445976&th=181c24731a408d98&view=att&disp=safe
>>
>
> Don't know if that link is supposed to have details but I clicked on it
> and nothing?
> 2016 White Fuso van which shows up as stolen on the Vic Roads rego check
> site?
>
>

Neither of you going to remind the "village idiot" that this is a
non-binary group and not his personal dumping ground?

--
keith on the 7 Oct 2021 wrote;
"He asserts that the claim is true, so, if
it is unproven, he is lying."

On 7/7/2022 5:46 PM, Clocky wrote:
> On 3/07/2022 7:33 pm, Daryl wrote:
>> On 3/7/2022 6:02 pm, JONZ wrote:
>>> On 7/3/2022 4:11 PM, Noddy wrote:
>>>> On 3/07/2022 3:39 pm, JONZ wrote:
>>>>> On 7/3/2022 12:02 PM, Noddy wrote:
>>>>>> On 3/07/2022 11:29 am, JONZ wrote:
>>>>>>> On 7/2/2022 9:13 PM, Noddy wrote:
>>>>>>
>>>>>>>>>> On a more amusing note, apparently he has no idea that "John
>>>>>>>>>> Hinton" is actually JONZ :)
>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>>>>>>
>>>>>>>> Yeah, I've been having trouble with it here too. Been hit and
>>>>>>>> miss with both sending and receiving posts.
>>>>>>>>
>>>>>>>> Still haven't worked out how to use it to delete posts from
>>>>>>>> Google Groups though :)
>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>> Ask kryppy, he knows *all* about the process. :)))
>>>>>>
>>>>>> He knows lots of things. Just ask him. It's just a shame that he
>>>>>> can't convince anyone around here that he does :)
>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>
>>>>>   Yep, While you`re here if you or any other Melbourne ppl see this
>>>>> truck anywhere. call the plod.
>>>>>    Is reported stolen,a mate has been severely ripped off involving
>>>>> a shift from Moruya to Melbourne. long story involving a bloke
>>>>> named barry King from Cowes.
>>>>
>>>> Haven't seen it but I'll let you know if I do.
>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>   Thanks, I`m not involved personally, but Jazz is a friend of mine,
>>> and thru a series of events she is out of pocket to the tune of
>>> thousands (so far) I don`t know anyone involved ('Cept Jazz) and she
>>> dos`nt deserve any of it....  Truck reg. Vic 1QL 5UD. Cheaper car
>>> rental. Melbourne
>>>>
>>>
>>> https://mail.google.com/mail/u/0?ui=2&ik=6fab5cb1f5&attid=0.4&permmsgid=msg-f:1737303633038445976&th=181c24731a408d98&view=att&disp=safe
>>>
>>
>> Don't know if that link is supposed to have details but I clicked on
>> it and nothing?
>> 2016 White Fuso van which shows up as stolen on the Vic Roads rego
>> check site?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Yep, fucked up. :(...Truck was found at hoppers crossing a couple of
days ago. Undamaged! Bloke didn`t get far (still not been found) was
taken from Sunbury!.

>>
>>
>
>
> Neither of you going to remind the "village idiot" that this is a
> non-binary group and not his personal dumping ground?
~~~~~~~~~~~~~~~~~~~~~

*Talking to yourself* is a sign of problems elsewhere tikky...Get help.
>
>
>

On 7/7/2022 7:06 pm, JONZ wrote:
> On 7/7/2022 5:46 PM, Clocky wrote:
>> On 3/07/2022 7:33 pm, Daryl wrote:
>>> On 3/7/2022 6:02 pm, JONZ wrote:
>>>> On 7/3/2022 4:11 PM, Noddy wrote:
>>>>> On 3/07/2022 3:39 pm, JONZ wrote:
>>>>>> On 7/3/2022 12:02 PM, Noddy wrote:
>>>>>>> On 3/07/2022 11:29 am, JONZ wrote:
>>>>>>>> On 7/2/2022 9:13 PM, Noddy wrote:
>>>>>>>
>>>>>>>>>>> On a more amusing note, apparently he has no idea that "John
>>>>>>>>>>> Hinton" is actually JONZ :)
>>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>>>>   Yep, reinstalled Eternal-September, back to the usual now. ;)
>>>>>>>>>
>>>>>>>>> Yeah, I've been having trouble with it here too. Been hit and
>>>>>>>>> miss with both sending and receiving posts.
>>>>>>>>>
>>>>>>>>> Still haven't worked out how to use it to delete posts from
>>>>>>>>> Google Groups though :)
>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>> Ask kryppy, he knows *all* about the process. :)))
>>>>>>>
>>>>>>> He knows lots of things. Just ask him. It's just a shame that he
>>>>>>> can't convince anyone around here that he does :)
>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>>>
>>>>>>   Yep, While you`re here if you or any other Melbourne ppl see
>>>>>> this truck anywhere. call the plod.
>>>>>>    Is reported stolen,a mate has been severely ripped off
>>>>>> involving a shift from Moruya to Melbourne. long story involving a
>>>>>> bloke named barry King from Cowes.
>>>>>
>>>>> Haven't seen it but I'll let you know if I do.
>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>   Thanks, I`m not involved personally, but Jazz is a friend of mine,
>>>> and thru a series of events she is out of pocket to the tune of
>>>> thousands (so far) I don`t know anyone involved ('Cept Jazz) and she
>>>> dos`nt deserve any of it....  Truck reg. Vic 1QL 5UD. Cheaper car
>>>> rental. Melbourne
>>>>>
>>>>
>>>> https://mail.google.com/mail/u/0?ui=2&ik=6fab5cb1f5&attid=0.4&permmsgid=msg-f:1737303633038445976&th=181c24731a408d98&view=att&disp=safe
>>>>
>>>
>>> Don't know if that link is supposed to have details but I clicked on
>>> it and nothing?
>>> 2016 White Fuso van which shows up as stolen on the Vic Roads rego
>>> check site?
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  Yep, fucked up. :(...Truck was found at hoppers crossing a couple of
> days ago. Undamaged! Bloke didn`t get far (still not been found) was
> taken from Sunbury!.

Good result then, will your friend still have to pay the insurance excess?
Rental insurance excess can be pretty steep.

--
Daryl