On 9/24/2021 10:57 AM, Noddy wrote:
> On 24/09/2021 9:57 am, keithr0 wrote:
>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>> First the chuck wouldn't let go of the drill, I stripped it down and
>>> was surprised to find that one of the major components was plastic.
>>> Now it comes loose while drilling.
>>>
>>> So I need a new 18v drill driver, the best buy that I have found is
>>> this:
>>>
>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>
>>>
>>> I like that it comes with a 6 year warranty (if you register) and
>>> seems cheaper than most of the competition. Bunnings, for instance,
>>> have a Ryobi for $99 but that's just the skin and the battery and
>>> charger are $149 extra.
>>>
>>> Anybody got a better suggestion?
>>
>> Thanks to all who replied with constructive suggestions, alvey and
>> felix can go fuck themselves with a piece of barbed wire.

~~~~~~~~~~~~~~~~~~~~~~

   Make that High tensile stuff. :)))

>
> ROTFL :)
>

--
"Usenet is like a herd of performing elephants with diarrhea. Massive,
difficult to redirect, awe-inspiring, entertaining, and a source of
mind-boggling amounts of excrement when you least expect it." — Gene
Spafford, 1992

On Fri, 24 Sep 2021 10:57:38 +1000, Noddy wrote:

> On 24/09/2021 6:54 am, lindsay wrote:
>> On 24/09/2021 6:05 am, alvey wrote:
>
>>  And asking people to prefix
>>> OT posts with "OT" is an old ng tradition. There's people who aren't
>>> at all
>>> interested in the opinions of the ng denizens on anything except the ng
>>> speciality and use "OT" as a filter.
>>
>> Bumhole Shire in the News - 22 August 2020
>> Another Knobbo Classic Cock-up - Meters  11/06/20
>> Bumhole (Vic) In The News  13/05/20
>> Merrimu News 02/10/19
>> The Vic Gvt Knows A Wasteland When They See It 25/11/20
>>
>> All off topic, like 99.99% of your CRAP, and I dont see OT in any of
>> your headers above, fucking hypocrite.
>>
>> hth, hypocrite.
>
> ROTFL :)
>
> Alvey's insides must be eating him out now that the toxic waste
> situation has been sorted and it's not going to Bacchus. I expect he and
> his fucktarded mental midget mates made *many* posts about it coming
> here before any decision had been made, and as usual they were shown to
> be wrong at the end of the day.

Couple of things Fraudster!

1. You are not fooling anyone (Deryl aside. Obviously.) pretending that you
don't read every post.
2. Unlike your desperate self, I don't speak for anyone else when I say
that I only reported according to the flip-flopping that was the
determination.
3. The jokes still on you (again), as it is historical fact that Bumhole
*was* recommended as a toxic waste site. ( https://tinyurl.com/wa8u3afu )
4. Bumhole will be a toxic site while you're still in it.

> Has a single one of them had the balls to put their hand up and admit
> they made a bad call?
>
> Yeah, didn't think so :)

Wow! The old Ask'n'Answer technique!

Haven't seen it since, well, the last time you used it. It hasn't been
sighted much since it was laughed out of existance in the mainstream usenet
over a decade ago.

Keep up the poor work Der Der!

alvey

On 24/09/2021 2:59 pm, jonz wrote:
> On 9/24/2021 10:54 AM, Noddy wrote:

>>> **Yep. Nothing wrong with Ryobi. Good value for money. Ryobi,
>>> Milwaukee, AEG, Homelite and others, are made by the same company -
>>> TTI. I have a mate who uses Ryobi tools professionally. He likes them.
>>
>> He'd be one of the few. There's nothing wrong with them, but they
>> *are* "handyman" tools. They're not meant for industrial/commercial use.
>
> ~~~~~~~~~~~~~~~~
>
>  They get just that with me...Absolutely *no* probs.

I'm sure they are. I know a couple of people who have them and they
swear by them, but they *are* pitched at the "handyman" segment of the
market. Whether that makes them inferior to the "big players" like
Milwaukee, Bosch, DeWalt and Makita I can't tell you as I haven't used
enough of them to make an honest comparison. But I do know that very few
tradies seem to use them.

Not that that means anything either. I have a few "Ozito" power tools
here which all come with a "For domestic use only" warning label
attached to the power cord and which were largely bought to be
sacrifical lambs, and I can't kill the things even though they've had a
massive workout :)

--
--
--
Regards,
Noddy.

On 24/9/21 5:02 pm, Noddy wrote:
> On 24/09/2021 2:59 pm, jonz wrote:
>> On 9/24/2021 10:54 AM, Noddy wrote:
>
>>>> **Yep. Nothing wrong with Ryobi. Good value for money. Ryobi,
>>>> Milwaukee, AEG, Homelite and others, are made by the same company -
>>>> TTI. I have a mate who uses Ryobi tools professionally. He likes them.
>>>
>>> He'd be one of the few. There's nothing wrong with them, but they
>>> *are* "handyman" tools. They're not meant for industrial/commercial use.
>>
>> ~~~~~~~~~~~~~~~~
>>
>>   They get just that with me...Absolutely *no* probs.
>
> I'm sure they are. I know a couple of people who have them and they
> swear by them, but they *are* pitched at the "handyman" segment of the
> market. Whether that makes them inferior to the "big players" like
> Milwaukee, Bosch, DeWalt and Makita I can't tell you as I haven't used
> enough of them to make an honest comparison. But I do know that very few
> tradies seem to use them.
>
> Not that that means anything either. I have a few "Ozito" power tools
> here which all come with a "For domestic use only" warning label
> attached to the power cord and which were largely bought to be
> sacrifical lambs, and I can't kill the things even though they've had a
> massive workout :)

Delusional workouts are unlikely to ever kill *any* powertool. It takes
*real work* to do that.

--

Xeno

Nothing astonishes Noddy so much as common sense and plain dealing.
(with apologies to Ralph Waldo Emerson)

On 9/24/2021 5:02 PM, Noddy wrote:
> On 24/09/2021 2:59 pm, jonz wrote:
>> On 9/24/2021 10:54 AM, Noddy wrote:
>
>>>> **Yep. Nothing wrong with Ryobi. Good value for money. Ryobi,
>>>> Milwaukee, AEG, Homelite and others, are made by the same company -
>>>> TTI. I have a mate who uses Ryobi tools professionally. He likes them.
>>>
>>> He'd be one of the few. There's nothing wrong with them, but they
>>> *are* "handyman" tools. They're not meant for industrial/commercial
>>> use.
>>
>> ~~~~~~~~~~~~~~~~
>>
>>   They get just that with me...Absolutely *no* probs.
>
> I'm sure they are. I know a couple of people who have them and they
> swear by them, but they *are* pitched at the "handyman" segment of the
> market. Whether that makes them inferior to the "big players" like
> Milwaukee, Bosch, DeWalt and Makita I can't tell you as I haven't used
> enough of them to make an honest comparison. But I do know that very
> few tradies seem to use them.
   Them 'ticketed' ones eh?. ;)

> Not that that means anything either. I have a few "Ozito" power tools
> here which all come with a "For domestic use only" warning label
> attached to the power cord and which were largely bought to be
> sacrifical lambs, and I can't kill the things even though they've had
> a massive workout :)

~~~~~~~~~~~~~~~~~~~

 I mentioned this before i think, about > fourteen years ago we had a
new house to make and hang curtains for. All hard as hell clinker
bricks. Many holes to drill.

   I used an el cheapo GMC (defunct now I think.) hammer drill. First
one lasted a few hours....Replaced under warranty same day. (local
agent) Its replacement finished the job and many others. Wore out a lot
of masonry bits, but still have it, resting in retirement. ;).

>
>
>
>
>
>

--
"Usenet is like a herd of performing elephants with diarrhea. Massive,
difficult to redirect, awe-inspiring, entertaining, and a source of
mind-boggling amounts of excrement when you least expect it." — Gene
Spafford, 1992

On 24/9/21 8:22 pm, jonz wrote:
> On 9/24/2021 5:02 PM, Noddy wrote:
>> On 24/09/2021 2:59 pm, jonz wrote:
>>> On 9/24/2021 10:54 AM, Noddy wrote:
>>
>>>>> **Yep. Nothing wrong with Ryobi. Good value for money. Ryobi,
>>>>> Milwaukee, AEG, Homelite and others, are made by the same company -
>>>>> TTI. I have a mate who uses Ryobi tools professionally. He likes them.
>>>>
>>>> He'd be one of the few. There's nothing wrong with them, but they
>>>> *are* "handyman" tools. They're not meant for industrial/commercial
>>>> use.
>>>
>>> ~~~~~~~~~~~~~~~~
>>>
>>>   They get just that with me...Absolutely *no* probs.
>>
>> I'm sure they are. I know a couple of people who have them and they
>> swear by them, but they *are* pitched at the "handyman" segment of the
>> market. Whether that makes them inferior to the "big players" like
>> Milwaukee, Bosch, DeWalt and Makita I can't tell you as I haven't used
>> enough of them to make an honest comparison. But I do know that very
>> few tradies seem to use them.
>    Them 'ticketed' ones eh?. ;)
>
>> Not that that means anything either. I have a few "Ozito" power tools
>> here which all come with a "For domestic use only" warning label
>> attached to the power cord and which were largely bought to be
>> sacrifical lambs, and I can't kill the things even though they've had
>> a massive workout :)
>
> ~~~~~~~~~~~~~~~~~~~
>
>  I mentioned this before i think, about > fourteen years ago we had a
> new house to make and hang curtains for. All hard as hell clinker
> bricks. Many holes to drill.
>
>    I used an el cheapo GMC (defunct now I think.) hammer drill. First
> one lasted a few hours....Replaced under warranty same day. (local
> agent) Its replacement finished the job and many others. Wore out a lot
> of masonry bits, but still have it, resting in retirement. ;).
>
>
>

Sounds like Ozito rotary hammer drill I have, must be 15yrs old and its
never missed a beat, hasn't done much work of late but I know it will do
whatever I ask of it without fail.

--
Daryl

On 23/09/2021 2:18 pm, keithr0 wrote:
> On 23/09/2021 3:44 pm, Clocky wrote:
>> On 23/09/2021 11:27 am, keithr0 wrote:
>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>> First the chuck wouldn't let go of the drill, I stripped it down and
>>> was surprised to find that one of the major components was plastic.
>>> Now it comes loose while drilling.
>>>
>>> So I need a new 18v drill driver, the best buy that I have found is
>>> this:
>>>
>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>
>>>
>>> I like that it comes with a 6 year warranty (if you register) and
>>> seems cheaper than most of the competition. Bunnings, for instance,
>>> have a Ryobi for $99 but that's just the skin and the battery and
>>> charger are $149 extra.
>>>
>>> Anybody got a better suggestion?
>>
>> If you don't do any heavy duty drilling for extended periods it will
>> be fine.
>>
>> Just avoid Makita. Their drills are rubbish now and their warranty
>> policy even worse.
>
> That seems to be the general opinion. A pity because, once upon a time,
> they were quite good.

They sure were. Sadly no longer the case.

On 24/09/2021 2:31 pm, Xeno wrote:
> On 24/9/21 1:51 pm, Yosemite Sam wrote:
>> On 24/09/2021 1:08 pm, Xeno wrote:
>>> On 24/9/21 10:33 am, Yosemite Sam wrote:
>>>> On 24/09/2021 7:45 am, Trevor Wilson wrote:
>>>>> On 23/09/2021 9:56 pm, Daryl wrote:
>>>>>> On 23/9/21 9:04 pm, jonz wrote:
>>>>>>> On 9/23/2021 4:17 PM, keithr0 wrote:
>>>>>>>> On 23/09/2021 3:47 pm, Daryl wrote:
>>>>>>>>> On 23/9/21 1:27 pm, keithr0 wrote:
>>>>>>>>>> The chuck on my cheap and nasty Aldi drill/driver has shit
>>>>>>>>>> itself. First the chuck wouldn't let go of the drill, I
>>>>>>>>>> stripped it down and was surprised to find that one of the
>>>>>>>>>> major components was plastic. Now it comes loose while drilling.
>>>>>>>>>>
>>>>>>>>>> So I need a new 18v drill driver, the best buy that I have
>>>>>>>>>> found is this:
>>>>>>>>>>
>>>>>>>>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I like that it comes with a 6 year warranty (if you register)
>>>>>>>>>> and seems cheaper than most of the competition. Bunnings, for
>>>>>>>>>> instance, have a Ryobi for $99 but that's just the skin and
>>>>>>>>>> the battery and charger are $149 extra.
>>>>>>>
>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~
>>>>>>>
>>>>>>>   I`ve got the Ryobi one + system. one battery, one charger and
>>>>>>> whatever tools you need. Excellent.
>>>>>>
>>>>>> A mate has got just about the entire Ryobi range of battery
>>>>>> tools, renovated his house so they have been well used and he's
>>>>>> very happy with the brand.
>>>>>>
>>>>>
>>>>> **Yep. Nothing wrong with Ryobi. Good value for money. Ryobi,
>>>>> Milwaukee, AEG, Homelite and others, are made by the same company
>>>>> - TTI. I have a mate who uses Ryobi tools professionally. He likes
>>>>> them.
>>>>
>>>>
>>>> just don't buy their 'whipper snipper'. it's crap
>>>>
>>> I have their petrol powered whipper snipper, it's quite reasonable
>>> for my needs.
>>>
>>
>> I meant the battery one, of course
>>
> I thought you did. That's why I made the point mine was petrol
> powered. The battery ones typically have lower output so, as a whipper
> snipper, they aren't really worthwhile. I have a battery Ryobi blower
> and it doesn't have as much power as my petrol powered blower. To be
> fair though, had I specced a more powerful blower than this,
> https://www.ryobi.com.au/garden-tools/products/details/18v-one-blower-tool-only-obl1820s
>

I have the Ryobi blower and it's fine for my needs, but it must be an
earlier model than that, since it looks different.

> I might have had more power. That said, I use this one only to give
> the garage and driveway a quick blow down, saves time, quick and easy.
> When I need anything serious done, I get the petrol one out. I also
> had a 5AH battery in my drill so didn't need to get another.
>

btw, the batteries they sell on eBay are cheaper than the originals, and
just as good if not better, plus they have a charge level indicator.

eg:
https://www.ebay.com.au/itm/193570378719?hash=item2d11b193df:g:VfYAAOSw9wxeadiF

--
"A mans got to know his limitations"
- clint Eastwood as Dirty Harry

On 24/09/2021 10:38 am, Yosemite Sam wrote:
> On 24/09/2021 9:57 am, keithr0 wrote:
>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>> First the chuck wouldn't let go of the drill, I stripped it down and
>>> was surprised to find that one of the major components was plastic.
>>> Now it comes loose while drilling.
>>>
>>> So I need a new 18v drill driver, the best buy that I have found is
>>> this:
>>>
>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>
>>>
>>> I like that it comes with a 6 year warranty (if you register) and
>>> seems cheaper than most of the competition. Bunnings, for instance,
>>> have a Ryobi for $99 but that's just the skin and the battery and
>>> charger are $149 extra.
>>>
>>> Anybody got a better suggestion?
>>
>> Thanks to all who replied with constructive suggestions, alvey and
>> felix can go fuck themselves with a piece of barbed wire.
>
>
> specifically what did I say that you found so offensive? will you
> reply or just run away?
>
>

ran away. no surprise there.

--
"A mans got to know his limitations"
- clint Eastwood as Dirty Harry

On 23/9/21 1:27 pm, keithr0 wrote:
> The chuck on my cheap and nasty Aldi drill/driver has shit itself. First
> the chuck wouldn't let go of the drill, I stripped it down and was
> surprised to find that one of the major components was plastic. Now it
> comes loose while drilling.
>
> So I need a new 18v drill driver, the best buy that I have found is this:
>
> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>
>
> I like that it comes with a 6 year warranty (if you register) and seems
> cheaper than most of the competition. Bunnings, for instance, have a
> Ryobi for $99 but that's just the skin and the battery and charger are
> $149 extra.
>
> Anybody got a better suggestion?
just change the chuck.

On 25/09/2021 12:51 am, Yosemite Sam wrote:
> On 24/09/2021 10:38 am, Yosemite Sam wrote:
>> On 24/09/2021 9:57 am, keithr0 wrote:
>>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>>> First the chuck wouldn't let go of the drill, I stripped it down and
>>>> was surprised to find that one of the major components was plastic.
>>>> Now it comes loose while drilling.
>>>>
>>>> So I need a new 18v drill driver, the best buy that I have found is
>>>> this:
>>>>
>>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>>
>>>>
>>>> I like that it comes with a 6 year warranty (if you register) and
>>>> seems cheaper than most of the competition. Bunnings, for instance,
>>>> have a Ryobi for $99 but that's just the skin and the battery and
>>>> charger are $149 extra.
>>>>
>>>> Anybody got a better suggestion?
>>>
>>> Thanks to all who replied with constructive suggestions, alvey and
>>> felix can go fuck themselves with a piece of barbed wire.
>>
>>
>> specifically what did I say that you found so offensive? will you
>> reply or just run away?
>>
>>
>
> ran away. no surprise there.
>
Ha ha copying your little hero alvey eh? Well no surprise there, you
aren't exactly and original thinker are you?

If you and he really believe that every post of yours demands a reply
then your both so far up yourselves that you need your name on the soles
of your shoes for identification.

So here is the news boyo, I reply to whatever I feel like replying to
and if that hurts your little ego then suck it up.

On 25/09/2021 8:24 am, keithr0 wrote:
> On 25/09/2021 12:51 am, Yosemite Sam wrote:
>> On 24/09/2021 10:38 am, Yosemite Sam wrote:
>>> On 24/09/2021 9:57 am, keithr0 wrote:
>>>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>>>> First the chuck wouldn't let go of the drill, I stripped it down
>>>>> and was surprised to find that one of the major components was
>>>>> plastic. Now it comes loose while drilling.
>>>>>
>>>>> So I need a new 18v drill driver, the best buy that I have found
>>>>> is this:
>>>>>
>>>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>>>
>>>>>
>>>>> I like that it comes with a 6 year warranty (if you register) and
>>>>> seems cheaper than most of the competition. Bunnings, for
>>>>> instance, have a Ryobi for $99 but that's just the skin and the
>>>>> battery and charger are $149 extra.
>>>>>
>>>>> Anybody got a better suggestion?
>>>>
>>>> Thanks to all who replied with constructive suggestions, alvey and
>>>> felix can go fuck themselves with a piece of barbed wire.
>>>
>>>
>>> specifically what did I say that you found so offensive? will you
>>> reply or just run away?
>>>
>>>
>>
>> ran away. no surprise there.
>>
> Ha ha copying your little hero alvey eh? Well no surprise there, you
> aren't exactly and original thinker are you?
>
> If you and he really believe that every post of yours demands a reply
> then your both so far up yourselves that you need your name on the
> soles of your shoes for identification.
>
> So here is the news boyo, I reply to whatever I feel like replying to
> and if that hurts your little ego then suck it up.

if you think I'm upset by anything you say then you're sadly mistaken.
just noting that you throw abuse without justification. you are learning
well from your new found sewer mate.

--
"A mans got to know his limitations"
- clint Eastwood as Dirty Harry

On 25/09/2021 11:07 am, Yosemite Sam wrote:
> On 25/09/2021 8:24 am, keithr0 wrote:
>> On 25/09/2021 12:51 am, Yosemite Sam wrote:
>>> On 24/09/2021 10:38 am, Yosemite Sam wrote:
>>>> On 24/09/2021 9:57 am, keithr0 wrote:
>>>>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>>>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>>>>> First the chuck wouldn't let go of the drill, I stripped it down
>>>>>> and was surprised to find that one of the major components was
>>>>>> plastic. Now it comes loose while drilling.
>>>>>>
>>>>>> So I need a new 18v drill driver, the best buy that I have found
>>>>>> is this:
>>>>>>
>>>>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>>>>
>>>>>>
>>>>>> I like that it comes with a 6 year warranty (if you register) and
>>>>>> seems cheaper than most of the competition. Bunnings, for
>>>>>> instance, have a Ryobi for $99 but that's just the skin and the
>>>>>> battery and charger are $149 extra.
>>>>>>
>>>>>> Anybody got a better suggestion?
>>>>>
>>>>> Thanks to all who replied with constructive suggestions, alvey and
>>>>> felix can go fuck themselves with a piece of barbed wire.
>>>>
>>>>
>>>> specifically what did I say that you found so offensive? will you
>>>> reply or just run away?
>>>>
>>>>
>>>
>>> ran away. no surprise there.
>>>
>> Ha ha copying your little hero alvey eh? Well no surprise there, you
>> aren't exactly and original thinker are you?
>>
>> If you and he really believe that every post of yours demands a reply
>> then your both so far up yourselves that you need your name on the
>> soles of your shoes for identification.
>>
>> So here is the news boyo, I reply to whatever I feel like replying to
>> and if that hurts your little ego then suck it up.
>
>
> if you think I'm upset by anything you say then you're sadly mistaken.
> just noting that you throw abuse without justification. you are learning
> well from your new found sewer mate.

And who would this "Sewer" mate be then?

On Sat, 25 Sep 2021 11:07:03 +1000, Yosemite Sam wrote:

> On 25/09/2021 8:24 am, keithr0 wrote:
>> On 25/09/2021 12:51 am, Yosemite Sam wrote:
>>> On 24/09/2021 10:38 am, Yosemite Sam wrote:
>>>> On 24/09/2021 9:57 am, keithr0 wrote:
>>>>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>>>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>>>>> First the chuck wouldn't let go of the drill, I stripped it down
>>>>>> and was surprised to find that one of the major components was
>>>>>> plastic. Now it comes loose while drilling.
>>>>>>
>>>>>> So I need a new 18v drill driver, the best buy that I have found
>>>>>> is this:
>>>>>>
>>>>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>>>>
>>>>>>
>>>>>> I like that it comes with a 6 year warranty (if you register) and
>>>>>> seems cheaper than most of the competition. Bunnings, for
>>>>>> instance, have a Ryobi for $99 but that's just the skin and the
>>>>>> battery and charger are $149 extra.
>>>>>>
>>>>>> Anybody got a better suggestion?
>>>>>
>>>>> Thanks to all who replied with constructive suggestions, alvey and
>>>>> felix can go fuck themselves with a piece of barbed wire.
>>>>
>>>>
>>>> specifically what did I say that you found so offensive? will you
>>>> reply or just run away?
>>>>
>>>>
>>>
>>> ran away. no surprise there.
>>>
>> Ha ha copying your little hero alvey eh? Well no surprise there, you
>> aren't exactly and original thinker are you?
>>
>> If you and he really believe that every post of yours demands a reply
>> then your both so far up yourselves that you need your name on the
>> soles of your shoes for identification.
>>
>> So here is the news boyo, I reply to whatever I feel like replying to
>> and if that hurts your little ego then suck it up.
>
> if you think I'm upset by anything you say then you're sadly mistaken.
> just noting that you throw abuse without justification. you are learning
> well from your new found sewer mate.

Eerie isn't it?
The same collection of crazed logic, same cliche-rich lexicon, same
perverted morality and the same narcissism. Throw in some schoolboy abuse
and it'd make you consider that some evil scientist had cloned Der Der.

alvey
Thinking of upgrading home security.

On 25/09/2021 11:36 am, alvey wrote:
> On Sat, 25 Sep 2021 11:07:03 +1000, Yosemite Sam wrote:
>
>> On 25/09/2021 8:24 am, keithr0 wrote:
>>> On 25/09/2021 12:51 am, Yosemite Sam wrote:
>>>> On 24/09/2021 10:38 am, Yosemite Sam wrote:
>>>>> On 24/09/2021 9:57 am, keithr0 wrote:
>>>>>> On 23/09/2021 1:27 pm, keithr0 wrote:
>>>>>>> The chuck on my cheap and nasty Aldi drill/driver has shit itself.
>>>>>>> First the chuck wouldn't let go of the drill, I stripped it down
>>>>>>> and was surprised to find that one of the major components was
>>>>>>> plastic. Now it comes loose while drilling.
>>>>>>>
>>>>>>> So I need a new 18v drill driver, the best buy that I have found
>>>>>>> is this:
>>>>>>>
>>>>>>> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>>>>>>>
>>>>>>>
>>>>>>> I like that it comes with a 6 year warranty (if you register) and
>>>>>>> seems cheaper than most of the competition. Bunnings, for
>>>>>>> instance, have a Ryobi for $99 but that's just the skin and the
>>>>>>> battery and charger are $149 extra.
>>>>>>>
>>>>>>> Anybody got a better suggestion?
>>>>>> Thanks to all who replied with constructive suggestions, alvey and
>>>>>> felix can go fuck themselves with a piece of barbed wire.
>>>>>
>>>>> specifically what did I say that you found so offensive? will you
>>>>> reply or just run away?
>>>>>
>>>>>
>>>> ran away. no surprise there.
>>>>
>>> Ha ha copying your little hero alvey eh? Well no surprise there, you
>>> aren't exactly and original thinker are you?
>>>
>>> If you and he really believe that every post of yours demands a reply
>>> then your both so far up yourselves that you need your name on the
>>> soles of your shoes for identification.
>>>
>>> So here is the news boyo, I reply to whatever I feel like replying to
>>> and if that hurts your little ego then suck it up.
>> if you think I'm upset by anything you say then you're sadly mistaken.
>> just noting that you throw abuse without justification. you are learning
>> well from your new found sewer mate.
> Eerie isn't it?
> The same collection of crazed logic, same cliche-rich lexicon, same
> perverted morality and the same narcissism. Throw in some schoolboy abuse
> and it'd make you consider that some evil scientist had cloned Der Der.
>

yes, spooky

>
> alvey
> Thinking of upgrading home security.

--
"A mans got to know his limitations"
- clint Eastwood as Dirty Harry

On 25/09/2021 11:10 am, keithr0 wrote:
> On 25/09/2021 11:07 am, Yosemite Sam wrote:

>> if you think I'm upset by anything you say then you're sadly mistaken.
>> just noting that you throw abuse without justification. you are
>> learning well from your new found sewer mate.
>
> And who would this "Sewer" mate be then?

Who cares? It's hypocritical bullshit coming from a moron who calls
people "Pedophiles" when they don't agree with him.

At the end of the day, Felix is nothing but a nasty little sooking bitch
who is the fucking *king* of taking his bat and ball and going home to
eat worms when people don't love him.

Which is all the time :)

--
--
--
Regards,
Noddy.

On 23/09/2021 1:27 pm, keithr0 wrote:
> The chuck on my cheap and nasty Aldi drill/driver has shit itself. First
> the chuck wouldn't let go of the drill, I stripped it down and was
> surprised to find that one of the major components was plastic. Now it
> comes loose while drilling.
>
> So I need a new 18v drill driver, the best buy that I have found is this:
>
> https://www.totaltools.com.au/152150-bosch-18v-1-x-4-0ah-hammer-drill-kit-0615990j4d
>
>
> I like that it comes with a 6 year warranty (if you register) and seems
> cheaper than most of the competition. Bunnings, for instance, have a
> Ryobi for $99 but that's just the skin and the battery and charger are
> $149 extra.
>
> Anybody got a better suggestion?

Went and bought the Bosch drill, but shouldn't have gone to North Lakes
on a Saturday morning when the entire population of Brisbane were trying
to get to the Sunshine Coast. Registered for the 6 year warranty, just
the usual stuff name, address, ATM pin number, date of the last time you
had sex and partners name (alvey would have trouble with the last bit).

The drill is good reasonably powerful, and has a neat feature, the nose
of the chuck doesn't have to spin with the rest of the chuck so you can
steady the drill by holding it when you are trying to exactly position
the drill.

On Mon, 11 Oct 2021 16:34:48 +1000, keithr0 wrote:

> Went and bought the Bosch drill, but shouldn't have gone to North Lakes
> on a Saturday morning when the entire population of Brisbane were trying
> to get to the Sunshine Coast. Registered for the 6 year warranty, just
> the usual stuff name, address, ATM pin number, date of the last time you
> had sex and partners name (alvey would have trouble with the last bit).

Yep.
You're so very much like the Fraudster now keith. He who incessantly brays
that he doesn't care at all what his critics say yet most of his posts
contain pissy snipes from behind his fishnet-inspired killfail. You two
should award each other medals for bravery. No-one else will...

alvey
"Generally considered a hero" lol!

--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus