i have flipflops.vhdl
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;

ENTITY flipflops IS

PORT (
clk : IN STD_LOGIC;
d : IN STD_LOGIC;
qa : OUT STD_LOGIC;
qb : OUT STD_LOGIC;
qc : OUT STD_LOGIC);

END ENTITY flipflops;

ARCHITECTURE beh OF flipflops IS

BEGIN -- ARCHITECTURE beh

ffa: PROCESS (clk, d) IS
BEGIN -- PROCESS ffa
IF clk = '1' THEN
qa <= d;
END IF;
END PROCESS ffa;

ffb: PROCESS (clk) IS
BEGIN -- PROCESS ffb
IF rising_edge(clk) THEN
qb <= d;
END IF;
END PROCESS ffb;

ffc: PROCESS (clk) IS
BEGIN -- PROCESS ffc
IF falling_edge(clk) THEN
qc <= d;
END IF;
END PROCESS ffc;

END ARCHITECTURE beh;

How can i complete flipflops_tb

LIBRARY ieee;
USE ieee.std_logic_1164.ALL;

-------------------------------------------------------------------------------

ENTITY flipflops_tb IS

END ENTITY flipflops_tb;

-------------------------------------------------------------------------------

ARCHITECTURE test OF flipflops_tb IS

-- component ports
SIGNAL clk : STD_LOGIC := '1';
SIGNAL d : STD_LOGIC;
SIGNAL qa : STD_LOGIC;
SIGNAL qb : STD_LOGIC;
SIGNAL qc : STD_LOGIC;

BEGIN -- ARCHITECTURE test

-- component instantiation
DUT : ENTITY work.flipflops
PORT MAP (
clk => clk,
d => d,
qa => qa,
qb => qb,
qc => qc);

-- clock generation
Clk <= NOT Clk AFTER 10 NS;

-- waveform generation
WaveGen_Proc : PROCESS
BEGIN
-- insert signal assignments here
d <= '0';
WAIT FOR 5 NS;
d <= '1';
WAIT FOR 3 NS;
END PROCESS WaveGen_Proc;

END ARCHITECTURE test;

-------------------------------------------------------------------------------

CONFIGURATION flipflops_tb_test_cfg OF flipflops_tb IS
FOR test
END FOR;
END flipflops_tb_test_cfg;

-------------------------------------------------------------------------------
thanks

On 12/05/2021 16:23, Dương Dương wrote:
> i have flipflops.vhdl
> LIBRARY ieee;
> USE ieee.std_logic_1164.ALL;
>
> ENTITY flipflops IS
>
> PORT (
> clk : IN STD_LOGIC;
> d : IN STD_LOGIC;
> qa : OUT STD_LOGIC;
> qb : OUT STD_LOGIC;
> qc : OUT STD_LOGIC);
>
> END ENTITY flipflops;
>
> ARCHITECTURE beh OF flipflops IS
>
> BEGIN -- ARCHITECTURE beh
>
> ffa: PROCESS (clk, d) IS
> BEGIN -- PROCESS ffa
> IF clk = '1' THEN
> qa <= d;
> END IF;
> END PROCESS ffa;
>
> ffb: PROCESS (clk) IS
> BEGIN -- PROCESS ffb
> IF rising_edge(clk) THEN
> qb <= d;
> END IF;
> END PROCESS ffb;
>
> ffc: PROCESS (clk) IS
> BEGIN -- PROCESS ffc
> IF falling_edge(clk) THEN
> qc <= d;
> END IF;
> END PROCESS ffc;
>
> END ARCHITECTURE beh;
>
> How can i complete flipflops_tb
>
> LIBRARY ieee;
> USE ieee.std_logic_1164.ALL;
>
> -------------------------------------------------------------------------------
>
> ENTITY flipflops_tb IS
>
> END ENTITY flipflops_tb;
>
> -------------------------------------------------------------------------------
>
> ARCHITECTURE test OF flipflops_tb IS
>
> -- component ports
> SIGNAL clk : STD_LOGIC := '1';
> SIGNAL d : STD_LOGIC;
> SIGNAL qa : STD_LOGIC;
> SIGNAL qb : STD_LOGIC;
> SIGNAL qc : STD_LOGIC;
>
> BEGIN -- ARCHITECTURE test
>
> -- component instantiation
> DUT : ENTITY work.flipflops
> PORT MAP (
> clk => clk,
> d => d,
> qa => qa,
> qb => qb,
> qc => qc);
>
> -- clock generation
> Clk <= NOT Clk AFTER 10 NS;
>
> -- waveform generation
> WaveGen_Proc : PROCESS
> BEGIN
> -- insert signal assignments here
> d <= '0';
> WAIT FOR 5 NS;
> d <= '1';
> WAIT FOR 3 NS;
> END PROCESS WaveGen_Proc;
>
>
>
> END ARCHITECTURE test;
>
> -------------------------------------------------------------------------------
>
> CONFIGURATION flipflops_tb_test_cfg OF flipflops_tb IS
> FOR test
> END FOR;
> END flipflops_tb_test_cfg;
>
> -------------------------------------------------------------------------------
> thanks
>

Have you just posted your homework questions ?

MK